An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: how do i put the service spanner sing off in laugna...
I don't know whether this will work but worth a try. Keep the trip meter button pressed down, turn on the ignition hold the button down for 10/20 seconds and that may do it. Please press the Blue Button to appraise my FREE! Effort. I hope it worked? Thank You! Paul 'W'
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Run fault codes as the light may also refer to the engine having a fault.. When the CPU finds a sensor that is outside set parameters it will put on a light to let you know that something is wrong. With Renault it may be the service light meaning check the engine and not service the engine.
The easiest way to change a serpentine belt is to first draw yourself a pic as to where it goes so you know how to put it back on. Then you can either undo the altinator tension bolt until you can get the belt loose enough to get it off or you can use a big spanner or a spanner with a long pipe and a mate to pull the self tentioner wheel back and replace the belt. The self tensioner should be ontop of the motor next to the power steering resovior ( small wheel about 3 inches round will be smooth on the belt surface and the top side of the belt rolls on it put spanner on the centre of the wheel and pull up) not all have this depends on the local you bought car in I'm in australia and they have self tensioning belt here)