I have Toyota Prado TX year 1997 chassis KZJ95-0067487 it makes noise in the rear wheel bearing. I replaced the bearing by new one but two days after replacement the noise continues how to solve that problem. I do have to change the diff? or inner parts of the diff? Is there something to be done?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
cupped tires can make noise rotate them to the front to see if the problem goes with the tires they do have wheel bearings that go bad and the rear diff but the rear diff will change noise when your on and off the gas
For oil and filter - every 3 -5,000 miles. rotate tires at same interval. air filter is on condition, so check it at oil change and clean it until it needs replacement. trans. fluid is on condition along with filter or I believe 60k miles. Belts and hoses are every 3 years or based on condition. Get a maintenance guide from an auto parts store or go to the dealer for an owner's manual, which will have all of this information.
It's the wheel bearing. Guaranteed. Just replaced mine. Go to Audiworld tech articles for step by step instructions on how to test the wheel bearings. They must have been put in wrong last time or they just went out again.
I've been resetting pajero's compasses but try to get to an area where you can do 360 degrees turns (empty car parks, ) press the reset button and make 2 complete 360 turns slowly and normally this should set the compass bearing.
Let us know how you get on. Cheers.