Question about 2001 Suzuki Grand Vitara

1 Answer

Belt replacement how can i replace the main belt. It works the a/c and power steering too. can't get it on.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 156 Answers

There should be a pulley in that series that in not connected to the A/C or power steering that you can adjust back and forth in order to get the belt to slide on. Then you have to adjust it again to get it to the right tightness. it's called the tensioner pulley just in case you can't find it you can go to a shop near you and they will point out where it might be and how to adjust it.

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Powering steering trouble shooting


1.Steering wheel is hard to turn : ... The power steering box or rack or power steering pump is bad: Repair or replace steering gear or pump as required. The fluid level in the power steering reservoir is low: Fill fluid to proper level. The power steering drive belt is damaged or broken: Replace power steering drive belt.

Car Power Steering Diagnosis and Troubleshooting - AUTOINTHEBOX

blog.autointhebox.com/car-power-steering-diagnosis-and-troubleshooting.html https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=Powering+steering+trouble+shooting

Dec 12, 2016 | Cars & Trucks

1 Answer

Power steering pump and tensioner and all power steering belt pulleys changed air removed and steal loud squealing


Hi Tereza.
has anybody checked the pressure hoses of the steering and especially the one which has the one way valve inside whether is the one with the problem?

May 04, 2014 | 2006 Ford Taurus

1 Answer

Power steering hard


Check for low power steering fluid, a broken belt (there is a belt that connects the engine's main drive pulley to the power steering, alternator, air conditioning, etc. pulleys) or your power steering pump went bad and will need to be replaced.

Feb 04, 2011 | Toyota Passenger Cars & Trucks

1 Answer

The power steering is out and I can hear a pulley going bonkers. There is a squealing sound like a belt isn't catching, and also an oscillating sound like a pulley is loose and moving back and forth or...


i am having a similar problem. my power steering pully is loose. im pretty sure i have to replace the pump and the pully however my power steering still works but the belt squeals.check all the pullys they drive the belt or belts. its usually always either the tensioner thats the pully that allows you to remove the drive belt or the power steering pully which sucks the most because you must remove the entire power steering pump to replace the pully and since you have to go through all that trouble you might as well replace the entire power steering pump as well. i am not a mechanic so try and find more information.

Jul 26, 2010 | 2002 Hyundai Accent

1 Answer

How do you remove the timing belt cover on a 1995 VW Golf.


What is needed Tools: 6mm and 8mm allen wrench socket, 5mm allen wrench. 8mm, 13mm, 19mm socket and ratchet. 10mm combination wrench. Long ratchet extensions (at least one 6in, more are helpful). 5inch Wheel puller (for main shaft pulley). (Some models may need a special spanner tool to adjust the timing belt tensioner) Parts: 2 gal of anti-freeze mixed with distilled water. All three V-belts. (Alt, A/C, P/S) $32.95 New water pump top. $91.91 New gasket for WP. $9.13 New timing belt. $26.13.


Procedure:

Remove battery cable (either power (+) or ground (-)) remove alternator remove A/C remove power steering pump .Remove water pump pulleys remove main shaft pulleys remove timing belt covers remove A/C mounting hardware remove timing belt (don't turn any of the wheels its connected to) replace timing belt adjust belt tension remove water pump face put on new gasket and new part.

Leave pulleys off. replace bottom timing belt cover, replace crank shaft pulley, replace steering pump, replace A/C, put small belt on A/C (hang loose) put large belt around A/C, Main and water pump pulley. put middle size belt on Main water pump and power steering pump reattach bolts for the steering pump pulleys put alternator back on adjust all belts. connect battery

Problem areas:
Main pulley: There are 4 6mm hex head bolts. These must be removed. The main 19mm hex head can be used to turn the engine it the timing belt slips and you have to readjust the timing.

Putting on new belts: This can be a real pain if you get VW belts. The adjustments won't give enough to put the belts over the edge so the easy way is to remove the pulley on the water pump. Then its real easy.

Timing: If you turn the wheels that the timing belt goes on you will have to reset the timing. Mark the timing points with something like whiteout so its easy to see. The timing mark on the toothed gears are small dots. The timing mark for the crankshaft is a small cut on the outer pulley. When its aligned with the intermediate wheel timing mark (there is an arrow on the cover as a hint) should intersect as viewed from the right wheel well. The camshaft timing mark should line up with the top of the engine near the front.

Power steering pump: It is held on with lots of bolts. One is in a channel that is hard to see but can be found with a 6" extension. If you look at the pump you will see three bolts that go into the housing. This should give you an idea where the forth is.

May 01, 2010 | 1995 Volkswagen Golf

1 Answer

Power Steering Belt slipping


Hi!!

Just apply some ENGINE DEGREASER on the belts and pulleys, rinse them with plain water, making sure the electrical components don't get wet. That will take care of your problem.

If helpful, click below.

Apr 15, 2010 | 1998 Nissan Frontier

1 Answer

Power steering pump seems to be dieing on my 2001 hyundai elantra


If it happens mainly when your car is cold, it is a common symptom known as "morning sickness" or "black rack disease". Check your power steering fluid to see if it has become discoloured. If so, try flushing the system and replace the fluid with an approved power steering fluid. If this does not solve the problem, you may need to replace the rack and pinion steering unit.

Oct 08, 2008 | 2001 Hyundai Elantra

1 Answer

Belt removal or change


i'm not 100 percent possitive but i assume you will have to loosen the tensioner to serpetine belt and it should have a adjustment and just loosen the adjustment. if thats the case you can jump the power steering belt off and back on by prying it with a screw driver and rotating the crankshaft pully

Sep 11, 2008 | 1989 Honda Prelude

Not finding what you are looking for?
2001 Suzuki Grand Vitara Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...