- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1994 to 2006 Sonata, a 2001 to 2006 Elantra, a 2000 to 2006 XG350 or a
2001 to 2006 Santa Fe, you will need to access alarm system control
module. On most of those vehicles it is located on the driver's side
fascia panel. But on the Sonata, the facia panel is in the center.
Once you have found this module,
you will want to ensure that the memory switch is in the OFF position.
Then turn the ignition on.
Wait 5 seconds and set the
memory switch to SET position and then press the remote transmitter lock
button to send the code to the alarm system control module.
If you would like to program a second remote transmitter then you will need to press second remote transmitter lock button.
Next set the memory switch to
off, then turn the ignition off. You can confirm your programming by
locking and unlocking the vehicle with both of the remotes. good luck my friend
My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata. Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine. Its easy to tell - just count your spark plug wires.
-- begine excerpt from 2000 Hyundai Sonata Repair guide --
The crankshaft position sensor is located next to the flywheel. The crankshaft position sensor is located next to the flywheel/torque converter. The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose. The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose. The crankshaft position sensor is located on the engine near the crankshaft pulley. The crankshaft position sensor is located at the front of the engine near the timing belt.
--- end excerpt from 2000 Hyundai Sonata repai guide ---
you might have 2 coolant sensors one for the gauge and one for pcm, and if you stop by a part store like autozone they will give you a print out of locations of one or both. did they tell you that you only had one ? ask the part store how many they are showing for your car when you go they will tell you. then find out which one they want you to replace
Your vehicle's brake lamp switch is located on top of the brake pedal arm bracket. Most brake lamp switches can be adjusted if they cause the lamps to stay on, however sometimes a replacement of the switch is the only solution.