Question about 1993 Oldsmobile Cutlass Ciera

1 Answer

93 olds cutlass service engine light turns on periodically

If the car has beed idling for awhile and even just running awhile, the service engine soon light turns on. Once the car is in motion again, it turns off.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 110 Answers

Have you had someone plug a computer into it and see if it is logging a code? this code be a v.s.s. sensor, to a fuel code. you might run the car by your local mechanic or autozone, advance auto, pepboys etc, they will normally pull the code for you for free and let you know what the outcome is. good luck any other questions just let me know i'll try to help.

Posted on Feb 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93' cutlass ciera 3.3 wont stay on after turning over


run the fault codes
not running indicates that the air/ fuel ratio is incorrect for the ambient temperature so you should be checking the ambient temp sensor /baro sensor and coolant temp sensor

May 28, 2017 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1988 olds cutlass idles dies under load


What engine. ? Did you try pressing on the gas a little to see if it will keep running ? You get no codes ? You know how to do the flash code test ? Clean the throttle bore an idle air control passages . Have you changed spark plug's & wire's ? Ever ? Fuel filter

Nov 05, 2017 | Oldsmobile 88 Cars & Trucks

1 Answer

89 cutlass cierra crank but wont start when wet out unless gas pedal is pushed


This should be a drive by wire vehicle meaning it has a cable for the throttle body. First thing would be to see if any error codes can be pulled up (most parts stores will do that for free.) Drive by wire versus the late model that use electronic control for the idle have a IAC or idle air control which when first started controls the idle air intake--all air is run by it to idle the vehicle when cold--

Usual symptoms are rather high idle when cold engine or even idle and RPM jumping up and down and stalling when cold.

Another way if idle does drop when cold is tapping the gas--engine will still run until hot. Means not usually a fuel pump issue.

You could also have if the vehicle is fuel injected a dirty Mass air flow sensor, a throttle position sensor, etc.

These can be if the vehicle has them cleaned using a special zero residue spray cleaner.

First have it scanned to see what if any errors it shows--the computer.

Dec 17, 2012 | 1989 Oldsmobile Cutlass Ciera

1 Answer

1994 olds cutlass cierra sedan with 125,000 mileage, service engine soon light came on, what's wrong?


Scan the computer for trouble codes. Use an OBD 1 scanner or code reader. The light having come on means there is a stored code or codes to direct you or a technician to the problem sensor or circuit.

Oct 25, 2012 | Cars & Trucks

2 Answers

My 88 Oldsmobile Cutlass Ciera is running rich and


The Oxygen sensor is very suspect. it is easy to damage on install, even with the correct tool.

Put the old one back in and test the car...

Jan 31, 2010 | 1990 Oldsmobile Cutlass Ciera

2 Answers

When i start up my 93 olds cutlass supreme it idles very high


Sticking throttle linkage, or faulty idle control system.

Jun 04, 2009 | 1993 Oldsmobile Cutlass Supreme

2 Answers

I have a 1993 cutlass ciera s and it dies


my 93 olds stalls then dosent turn over but i take ecu fuse out and wait a few minutes it will start and run till next time it decides to stall

May 14, 2009 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

439 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...