Question about 2002 Chrysler Sebring

1 Answer

I have a clunk noise in front end pasenger side when I drive over bumps in road. Had car on hoist and all is solid, I do not want to play a guess game as it will be costly,, anyone else have this problem

Posted by on

  • 5 more comments 
  • sailman67 Feb 28, 2009

    the noise sounds like metal on metal.My neighbour repair shop,, who I trust,,says everything is solid and car very safe to drive..the noise comes on every bump,, I luv this sebring,, but its driving me crazy.

  • sailman67 Feb 28, 2009

    66 chrgr ... Thanks so much,, I will try your solution,, retired on fixed income and times are not what they used to be...THANKS SO MUCH ,, safe driving

  • sailman67 Feb 28, 2009

    66chrgr. Once again Thanks for the help..Iwas quoted $750 to fix the problem,.. just returned from Sears where I told them your sway bar link solution... IT WORKED...and only cost $150 ... car sounding great,, just like the old days... you saved a retiree a lot of money,,,,hanks and god bless

  • sailman67 Feb 28, 2009

    66 chrgr... You are the Guru...thanks again

  • sailman67 Feb 28, 2009

    66 chrgr... You are the Guru...thanks again

  • mike loshbough
    mike loshbough May 11, 2010

    it doesnt take much movement at all for these to make noise like metal on metal and they are not expensive

  • mike loshbough
    mike loshbough May 11, 2010

    replace your sway bar link pins

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Please rate my answer and i am very glad to help!

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2012 Mazda 2. Sitting on the road and turning the steering wheel 90 degrees right and left it makes a clunking noise. Put up on a hoist and doing the same it makes no noise. What is it.


the noise is generated by the weight on the points that are turning
the hoist you should be using is a 4 post hoist that the car drives on and the wheels are still on the hoist
any hoist that leaves the wheels dangling in the air will not be suitable to find the fault
most likely a steering ball joint end , suspension ball joint or failed suspension rubber mount

Mar 18, 2017 | Mazda Cars & Trucks

1 Answer

Why is there a clunking noise coming from under the car when driving over sharp bumps in the road


could be a number of things, like a bad brake, bad ball joint or a problem with a control arm

Jun 15, 2014 | 2004 Infiniti G35 Sport Coupe

1 Answer

Clunking going over bumps


shocks my be going bad push up and down hard on top of the car over each front wheel and let go..it should not bounce up and down more than once. if it does shocks are bad.

Apr 08, 2010 | 2000 Chevrolet Prizm

2 Answers

I have a 1997 Grand Cherokee Laredo. I get vibration in the front suspension while driving at 60 MPH or hit a bump in the road. I need to slow down to stop the vibration of shaking. Has anyone had this...


you are getting an oscillation .you need to put the front tires on the back and try it again as it could be bad tires.
if it is still the same,put the vehicle on a hoist and check the tire/rim play side to side and up and down.
turn the wheel and check for bearing noise.
common things are wheel balancing,tires,tie rod ends,worn axles and bearings.

Mar 21, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Clunk noise from front passenger side when


That noise sounds to me like a Ball Joint problem. I would check to see if you have fittings to grease the front suspention.

Good luck, Allen

Oct 04, 2009 | 2005 Nissan Sentra

1 Answer

Clunking noise in the front right when coming to a stop


first off the alt. belt is too tight. loosen it. should go away. and if its a clunk in the frount end i would guess it is your struts or bushings or both.

Apr 02, 2009 | 1990 Toyota 4Runner

2 Answers

Clunk noise from front left suspension


My guess is a strut bushing/bearing, but have your front end checked out by good shop to make sure it isn't something else more dangerous.

Sep 09, 2008 | 2005 Pontiac Grand Am

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...