Question about 2005 GMC Yukon

Open Question

How to replace lights in steering wheel buttons 2005 Yukon

Also need a part # ....... thanks

Posted by on

6 Suggested Answers

  • 99 Answers

SOURCE: yukon front wheels bind in awd

usually normal condition for sharp turning, check and see that all tires are the same size. if you replaced two on front and not on rear this may be your problem

Posted on Nov 30, 2008

SOURCE: I need a wiring diagram for a 2005 Yukon 4X4

Clymer or Haynes auto manuals website

Posted on Sep 17, 2009

  • 44 Answers

SOURCE: Replacing the light on the steering wheel buttons?

The switch has to be replaced, the bulbs are not serviced seperately. On some of the vehicles, you could pull the the switch out far enough to access the connector and change it from the front, but be careful, if there is not enough slack in the harness, the steering wheel has to come off, along with the rear cover on the wheel, to get enough slack in the harness to remove the switches. This was a design change around 2004 or 2005.

Posted on Oct 02, 2009

  • 67 Answers

SOURCE: Steering Wheel Lights not working

they just pop out small screw driver pry out

Posted on Mar 17, 2010

  • 1 Answer

SOURCE: 2006 yukon xl denali some steering wheel lights

stearing jerks to the right and or left when in a turn eather righr or left , power stearing pump has been replaced and the stearing box has been replaced , did not solve the problem.

Posted on Apr 20, 2010

tripletauto
  • 1450 Answers

SOURCE: I have 2004 Yukon and would like to know how to

these bulbs are not replaceable. the controls themselves must be replaced. they are not very expensive.they are just pushed into steering wheel can pop out with a small flat blade screwdriver and unplug them

Posted on Jan 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 GMC Yukon Slt.how do I turn daytime driving lights on.?I was messing with buttons,trying to familiarize myself,& accidentally turned lights off


Owners manual will give info on this. If no manual, scroll through steering wheel functions until info is displayed on dash ans select as necessary

Nov 07, 2015 | GMC Cars & Trucks

1 Answer

I have a 2005 yukon and key cylinder will not turn ??


steering locked while under preasure. try turning wheel whilst turning key

Nov 26, 2012 | 2005 GMC Yukon

1 Answer

All but one light on my 2005 Yukon Denali steering wheel are out what could be the problem?


One possible area is the clock spring. This is a coiled ribbon wire, under the steering wheel, that allows the wheel to turn, and still have wires connected. Eventually the wire breaks at one point.

Jul 31, 2011 | 2005 GMC Yukon Denali

1 Answer

Need to reset oil life indicator on 2005 GMC Yukon Denali after an oil change...How do I do that please??..THANKS!


it depends........ if you have controls on the steering wheel or not. If you do, then go through the menu until you see OIL LIFE then hold in the reset button (looks like a backwards "L" with an arrow on it). Hold the reset button in until it reads OIL LIFE RESET or OIL LIFE 100%. If you don't have controls on the steering wheel, turn key on (engine off) and depress the gas pedal to the floor 3 times, now turn key off. crank engine up and see that it has reset, if not try it again.

Dec 21, 2010 | GMC Denali Cars & Trucks

1 Answer

Power steering problem when turning right


I'm not sure if that truck has rack and pinion steering, or a steering sector. In either case, it sounds like you have stuck valve and the hydraulic pressure is fighting you, instead of helping you. When ever you turn the steering wheel the valve is supposed to move and direct the hydraulic oil pressure to help you steer. The valve is built into the sector or the rack and pinion, you may have to replace the assembly. There are companies that recondition those items so you might want to shop around.

Jan 09, 2010 | 2005 GMC Yukon Xl Denali

1 Answer

Several of my lights behind the buttons on the steering wheel are out on my 2005 suburban 2500. How do you access these and repair


You have to remove the steering wheel center cover/air bag assembly and replace the buttons as a assembly you can't just replace the bulbs.They are molded into the buttons.

Dec 23, 2009 | 2005 Chevrolet Suburban

1 Answer

Replacing the light on the steering wheel buttons?


The switch has to be replaced, the bulbs are not serviced seperately. On some of the vehicles, you could pull the the switch out far enough to access the connector and change it from the front, but be careful, if there is not enough slack in the harness, the steering wheel has to come off, along with the rear cover on the wheel, to get enough slack in the harness to remove the switches. This was a design change around 2004 or 2005.

Sep 22, 2009 | 2004 GMC Yukon

1 Answer

Illumination of buttons on steering wheel


I have a Sebring Sedan 2005 Limited 2,7 / 6 Cyl. How can I change the illumination bulb of the Instrument Panel ?.
I can't see the Instrument Panel during night.

Mar 23, 2009 | 2004 Chrysler Sebring

1 Answer

Chevy steering wheel controls


You first have to disarm and remove the air bag (unscrews with bolts from behind the steering wheel) and then you will see the screws for the switches. Only the silverado awitches will work.

Jan 29, 2009 | 2002 Chevrolet Avalanche

Not finding what you are looking for?
2005 GMC Yukon Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...