Replacing a manual door mirror on 1999 toyota corolla

Barbara, Check the attached links, door mechanism.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

2005 Toyota Corolla driver door mechanism Google Search

Replace 2003 2008 Toyota Corolla Door Panel How to Change Install 2004...


Toyota Corolla Door Panel Removal Lock Lubrication Guide 2003 To 2008...

How To Install Replace Broken Exterior Front Door Handle Toyota Corolla 98...

This can be done by removing the drivers side door guard panel and removing wing mirror and replacing.

you must remove the door trim panel. the inside handle is bolted to the door with a lock and latch cable attached to it. screw at door hanle cover and another under window and lock master switch, then push clips holding around edge of panel. you will also need to remove small cover for inside of mirror

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

take off the inside triangle plastic part its inside the door to reveal three 10 mil nuts ,take them out and pull off the mirror complete,,then put back new one as same,,,its not to hard

if you open the door you can pop off 2 pieces of plastic that reveal 3 bolts. 3/16 (i think)socket works and you will need an extender. but it is literally 3 bolts and that is it. i bought the part from a dealer and it was $40 and they wanted $90 for install. took me 15 min.

inside the door it has a cap just remve it gentle with a knife or screwdriver.Insidide u will see 3 screwsremove it and unplug the electrical cord.At that moment the mirror is free pull it out and replace the new one plug the electrical cord,tight the screws replace the cap and check if its move with the control panel,Good Luck.

very easy there are little cover u need to take screws out of the pull the trim panel starting from the bottom take mirror cover of and pull the trim of there is a vapor plastic easy after that

Please use this link:

http://www.autozone.com/addVehicleId,2535402/initialAction,repairGuide/shopping/repairGuide.htm?pageId=0900c152800379b8

Good luck...

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door