Question about 1993 Honda Prelude

1 Answer

No oil pressure in my 1993 Honda Prelude 2.3 DOHC H23A1

I lost all oil pressure all of a sudden

Posted by on

  • David Melrose May 11, 2010

    check the oil filter and oil pan drain plug to see if they came loose.

  • brian tessereau May 11, 2010

    when this happened did the car shut-down? did you hear any funny noises? any smoke that you remember? how many miles? check the dipstick and see if it still registers full and make sure no metal shavings. just shine a light over the dipstick and see if it glitters. let me know i'll be glad to help.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

My car did the same thing the problem was a $14 washer inside the oil filter fitting on the car you have to pull the filter conection off (from the car) bit of an *** around but pretty simple.

Posted on Mar 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set crankshaft timing on 1992 honda prelude 2.3 liter?


here is a u-tube video with a good tip for making sure the timing marks dont get move once set may help
How to replace timing belt on Honda Prelude 92 96 2 3 lt H23a1

Jul 28, 2014 | 1992 Honda Prelude

2 Answers

What kind and how much oil do i need to put into my 1993 honda prelude?


usually between 4 and 41/2 quarts after you drain the old oil out of the pan and put on a new filter.

Jan 24, 2011 | 1993 Honda Prelude

1 Answer

I need to know where to put the hydraulic fluid for my shifting in a 1993 honda prelude 2.2 dohc vtec


I THINK you mean fluid for the Clutch? its a little resrvoir near the brake fluid reservoir at the firewall, just to the left of the brake.

Nov 21, 2010 | 1993 Honda Prelude

1 Answer

Having trouble installing leads from distributor to motor{sparks} and timing is out on honda prlude 93 h23a1


check to make shore that the cambelt has not jumped a tooth or 2.and check to make shore that the spark lead's are in correct place's so that the firing order is correct.

May 09, 2010 | 1993 Honda Prelude

1 Answer

2.3 dohc wont pass smog


Did you do a full tune up?
Do a compression test and check for any cyclinder that is low in PSI.
Look of wet plug and oil coated plug(s).
== Which item CO,NOx,Hc is failing?
You may need to repose to add information.
Use a plug non-fouler / protector on the weak cylinder will help if HC is just shy from the passing limit.
3dc4919.jpg

Mar 05, 2010 | 1993 Honda Prelude

1 Answer

Im just trying to find the idle air control valve


it's on the in take plenum underneath the runners u should be able to see it from the top of the motor . Also check coolant level if the rpms fluctuate due to the coolant temp sensor not submerged in coolant.

Oct 20, 2009 | 1993 Honda Prelude

Not finding what you are looking for?
1993 Honda Prelude Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...