Question about 2007 Ford Edge SEL Plus

2 Answers

1 headlight works intermittently other doesnt work.Side and full beam work perfectly

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

The problem is probably a corroded connection. go to an autozone or similar auto supply and get a spray can of contact cleaner. remove the bulb and spray the plug plus the end of the bulb. rub off any corrosion.

reassemble. if this doesnt do it get a new bulb as car bulbs get banged around alot.

please mark this answer as a fixya.

Posted on Feb 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 463 Answers

Are these conventional bulbs or HID? Probably bulb is burnt out, but there is still enough filament flapping around in there to complete the circuit under some circumstances. Either that, or the bulb itself is not seated firmly in its connector.

Posted on Feb 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

2 Answers

Why doesnt headlight work on low beam left side?


Bulb may be no good as in headlight bulbs one filament can go leaving only either low beam or high beam operational on one headlight so change the bulb first on that side other than that could be power related

Apr 17, 2015 | 1999 Volkswagen Beetle

1 Answer

Dipped headlights are intermittent


Look for the RELAYS for the lights. They are usually on the fuse box. Replace the headlight relay.

Jan 06, 2014 | 2001 Volkswagen Beetle

1 Answer

Right headlight not working full beam only


you need a new bulb, most have a double filament.

Oct 10, 2013 | Jeep Cars & Trucks

1 Answer

2007 jeep compass low beam doesnt work


Check the fuse for that side yes you have a fuse for each high and low beams for each side

Mar 26, 2013 | 2007 Jeep Compass 2.4

1 Answer

My high beams work but low beams 1 is not working


Check the headlight relays- your owners manual will show you where they are.

Mar 11, 2012 | 1995 Ford Explorer

1 Answer

1999 malibu passenger side low beam headlight doesnt work. I replaced the bulb and it didnt work. i tried the drivers bulb (which works) on the passenger side and it still doesnt work. also, the daytime...


as for the headlight, did you check the fuse. on some vehicles there is a fuse for the left and right headlight! the fuse should be in the underhood fuse and relay box.

Jan 04, 2010 | 1999 Chevrolet Malibu

4 Answers

Headlight main beam not working


Strange headlamp problems on Saabs can often be attributed to a failing Headlamp relay. Here are a few common situations:
Issue1 - Headlamp switch will work backwards: Turn on the switch and theheadlights go off and turn off the switch and the headlights will goon.
Issue 2 - High beams will disappear. You will have nohighbeams. Be sure to check the headlight bulbs PRIOR to ordering therelay. Remember however that it is possible for both high beams burn out at the same time
Issue3 - High beams will not work only the low beams will.
Issue 4 - A single bulb setting (low or high) on either side will not work and bulb replacement will fix it.
You can sometimesfix these issues by removing the relay, taking off the cover andresoldering the connections on the relay bottom. To perform this repair, go to my illustrated tutorial at customsaab.com.
In some cases youwill have to replace the relay to effect a long term cure. The aftermarket replacement can be had at Eeuroparts.com for about $60.00:
Name: Bulb Check Relay
Part Code: 4109070A
Brand: sm_311e0dbd-c670-4bed-a50a-1ba3424ef87d.jpg
Description: Bulb check relay for any 9000 92-98, 900 94-98, 9-3 99-03, 9-5 all.

KAE (Kaehler) made in Germany.
Price: $59.90


Nov 19, 2008 | 1999 Saab 9-5

Not finding what you are looking for?
2007 Ford Edge SEL Plus Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63577 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...