Question about 2000 Buick LeSabre

1 Answer

2005 Buick LeSbare Power Front seats will not move

Have a 2005 Buick LeSabre the power seats willnot move.The car has memory controls, the mirrors will move, however the the drivers side front seat will not

Posted by on

  • 3 more comments 
  • Anonymous Mar 14, 2014

    my heater control panel quit working but now the power seats dont want to work ran the seat back to work on the dash and now the seat wont work the windows mirrors n door locks all still work.

  • Anonymous Mar 19, 2014

    the car seat is stuck in the forward position

  • Anonymous Mar 22, 2014

    power seat dosen`t move

  • Anonymous Mar 23, 2014

    Motor on both seats have the little plastic thingy broke off of the rod that spins around that moves the seat! How can I fix it?

  • Anonymous Mar 26, 2014

    Power seat want move

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 408 Answers

Check all fuses and relays.  Sounds to me like one is blown.

Posted on Mar 05, 2009

  • Travis Bronson
    Travis Bronson Dec 09, 2013

    my buick lesaber power drivers seat won't move how can i fix it

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 LINCOLN ZEPHYR DRIVERS ELECTRIC SEAT WILL NOT MOVE BACK WHEN KEY IS TURNED OFF


Principles of Operation
The driver seat module (DSM) is on the controller area network (CAN) communication network. To support several vehicle subsystems, the module permits intermodule and diagnostic tool communications.
The DSM controls the memory driver seat and the passenger memory power exterior mirror. This passenger memory power exterior mirror feature allows the driver to program personalized mirror positions. Once the driver stores a mirror position, the driver can recall the setting by pressing the corresponding memory switch or by using a programmed remote keyless entry (RKE) transmitter. For additional information, refer to Section 501-10 .

How to Diagnose Controller Area Network CAN

Driver Seat Module - Memory Seat
The power driver seat, power outside rear view mirrors and power adjustable pedals are controlled by the driver seat module (DSM) only when the vehicle is equipped with the programmable/recall memory option. The DSM is located on the driver seat track.
This system allows automatic positioning of the driver seat to 2 programmable positions.
  • A power driver seat position can be stored at any time. The driver must move the seat to the desired position using the driver seat switch assembly. The driver must then depress the memory SET switch which activates the memory SET switch light emitting diode (LED). Within 5 seconds (before the LED goes out), the driver must select a memory position. Memory 1 is selected by depressing memory switch 1. Memory 2 is selected by depressing memory switch 2.
  • If no memory switch input is received within the 5-second time limit, the operation is aborted and the memory seat position switch (set switch) LED is turned OFF. This also occurs if one of the following inputs is received during the 5-second programming limit:
    • Driver seat control switch
    • Memory seat position switch (set switch)
    • Power adjustable pedal switch
A programmed seat position can only be recalled when the transmission selector is in PARK or NEUTRAL with the ignition switch in the RUN position. A position may be programmed at any time.

Easy Entry/Easy Exit
The driver power seat easy entry/easy exit feature can be enabled/disabled. Refer to Section 418-01 or the owner's literature.

This may need to be done with a scan tool

Apr 24, 2017 | Lincoln Cars & Trucks

2 Answers

Where is airbag censor in 2005 lesabre?


For the front end it will be on a cross member by the bumper.
For the side impact sensor it will be I pillar between or behind the doors at the bottom. Here is a diagram.

fc4f1ed2-cfea-485a-9ac1-a45db15a0f13.gif

Jun 05, 2014 | 2005 Buick LeSabre

1 Answer

Drivers seat won't move back or forward also power mirrors


They run off the same circuit breakers. In fuse box, left side dash, open driver door for access

Apr 07, 2014 | Buick Riviera Cars & Trucks

1 Answer

My right mirror on 325 i 2005 doesn't work. When i change my seat position with the memory, the seats goes on but not the mirrors. I can adjust my left mirror but not the rigth one; it never move.


I would safely assume your right mirror may be inoperable period then by your statement you are leaving the switch for the mirrors in the middle during switching correct and during adjustment are switching to R/L mirror on the switch? Mirrors are on the same circuit so both should be operable. Have the mirror checked for operation before heading any further. I Think you will find during this its unplugged from its source of power or inoperable period and needs replaced. Remember to rate my solution and leave testimonial PS please purchase you a Owners Manual for your car you will thank me later.

Oct 09, 2012 | 2005 BMW 325i Automatic

1 Answer

I have a 2005 Jeep Grand Cherokee Limited. My drivers side front power seat does Not stay adjusted. Every time I turn the ignition on the seat moves backward and the back lays down.


The limited edition brings memory setting for mirrors and seats, it recognizes which key are you putting in the ignition and puts the saved setting accordingly to that driver's key. That is the reason your seat keeps moving. You need to reprogram the seat position for that key. Good luck

Dec 30, 2009 | 2005 Jeep Grand Cherokee

1 Answer

2000 Buick LeSabre where power locks, seats, windows quit working


If all power devices stopped at the same time you may have a bad fuse link. Since it is rare for all the fuses blowing at once and you already checked them. Start at your fuse links before assuming something expensive.

Aug 11, 2009 | 2000 Buick LeSabre

2 Answers

WHERE IS THE BATTERY?


I believe the Buick body style is the same for the years 2000 to 2005. The battery for my 2000 Buick LeSabre is under the back seat.

Jul 09, 2009 | 2002 Buick LeSabre

1 Answer

Lost power to the driver seat and heat for both front seats


CHECK FUSES AND LOOK UNDER SEAT FOR A PLUGS IN WIRE, ALOT OF MODELS HAVE THE POWER PLUG UNDER THE SEAT, TRY THAT ,ROBERT

Jun 15, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
2000 Buick LeSabre Logo

765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...