Question about 2006 Ford Fusion

2 Answers

Check engine light came on

I have a 2006 ford fusion and i'm not having any problems with it, but my check engine light just came on how can i determine what the problem is. i saw in the previous question something about a code, is that for all cars.

Posted by on

  • Chuck Martin
    Chuck Martin May 11, 2010

    Yes you will have to have someone hook a scan tool to the data link connector and retrieve the trouble codes.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If AutoZone is in your area, simply go to an AutoZone parts store. They have the plug-in tool that reads the code (and can erase it so your light goes off until triggered again). They give you a free print out of the code and the code definitions. When my light went on it was simply 'PO128' - most likely thermastat. I'll replace have thermastat replaced if it is reoccurring, but the light has stayed off so far.

Posted on Apr 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

U need to have it hooked up to a dianostics scanner.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know what code 2110 ford fusion 2006 se


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection help.png Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mV0SayWu

Sep 22, 2015 | 2006 Ford Fusion

1 Answer

What does 2110 code on 2006 ford fusion mean


P2110 2006 FORD FUSION P2110 2006 FORD FUSION - Throttle Actuator Control System - Forced Limited RPM 0 Comments ' Add Yours Possible causes - Faulty Throttle Actuator Control (TAC)
- Throttle Actuator Control (TAC) harness is open or shorted
- Throttle Actuator Control (TAC) circuit poor electrical connection > Help with this Symptoms - Engine Light ON (or Service Engine Soon Warning Light P2110 2006 FORD FUSION Description The TAC system is in the failure mode effects management (FMEM) mode of forced limited RPM.

Read more: http://helpforcars.net/obd_codes/p2110_2006_ford_fusion.html#ixzz3mUz73ACP

Sep 22, 2015 | 2006 Ford Fusion

3 Answers

Why does a 2006 Ford Fusion have a strong vibration when stopped and in Drive?


If there are no check engine lights could be a bad motor mount or two. Would have them checked. Try putting car in neutral and see if vibration disapates a little.

Aug 23, 2012 | 2006 Ford Fusion

1 Answer

2006 Ford Fusion 2.3L I4 Engine Check engine light ODBC code is P0455. I have already replaced the gas cap.


The check engine light won't go out unless you (1) clear the code with a tester or (2) give the computer a chance to determine the problem is no longer there. It has to go thru several test cycles detecting no problem before the computer will turn the light off. You could also have another problem causing an evaporative emission leak (like a vent hose for instance).

Jun 06, 2011 | 2006 Ford Fusion

1 Answer

Had to have 2006 Ford Fusion engine replaced. Mechanic replaced it with a 2006 Ford Fusion engine but can't get the check engine light to turn off. There are no apparent problems with the engine.


u need to hook it to a scanner to put the lite out--parts places doit--if no relief then computer may need reprogrammin cause it doesnt match new engine--a specialist shud do this-u cant use a wifi connection-too much data to download-----

May 06, 2011 | 2006 Ford Fusion

1 Answer

Check engine light stays on. Car doesn't appear to have any problems. 2006 Ford Fusion - need to get it inspected but can't with the light on.


first check gas cap make sure on properly and not damaged if good have car scanned just because not running bad doesnt mean to much for trouble code there are 100s of codes ---most auto stores offer free scanning the code will help pinpoint ur problem

Jan 20, 2011 | 2006 Ford Fusion

1 Answer

My 2006 ford fusion check engine light is on and


P0882 - TCM Power Input Signal Low, this is a transmission code, I recommend that you take it to a dealer or qualified transmission shop. Hope this helps.

Jul 05, 2010 | 2006 Ford Fusion

2 Answers

The check engine light on my 2006 ford fusion s blinks 8 times.....what does that mean...i just changed the oil. thanks


It means you have an engine miss. Have the vehicle scanned. Autozone will do this for free.

Sep 07, 2009 | 2006 Ford Fusion

1 Answer

2009 ford fusion engine light stays on steady


You just have to disconnect the battery for 1/2 hour. then reconnect and drive for 10 miles so computer can relearn your engine again. It may run rough. You should have the key off when refueling because computer sensed a fuel vapor leak during fueling and turned the light on.

Also, you can always drive with a check engine light on. It just means you are not meeting emissions. Do not drive if it's flashing on and off.

May 23, 2009 | 2006 Ford Fusion

3 Answers

Throttle does not work-wrench light on


Certain emissions parts are covered 8 yr / 80,000 miles (e.g. PCM, ECU, & TCM). I've also read of bad gas caps leading to problems. Have you changed gas caps or added a locking cap that's not Ford approved for this fuel system?

May 01, 2009 | 2006 Ford Fusion

Not finding what you are looking for?
2006 Ford Fusion Logo

698 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...