- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a fuse in the fuse panel under driverside dash. alternate is to use the "deactivate remote entry" button in the trunk. it was designed to increase security for valet service. the bummer is you'll have to lock/unlock doors and trunk manually with the key
open the trunk with the key, look on the trunk latch for a (very) small flip latch, this is the valley parking lockout switch. Flip it to the other position, and retry. If that does no work then the cable is broken.
2000 Mazda 626
Note:Make SURE the battery is new. Instructions for programming ONE keyless remote fob. 1.Open the driver’s door & leave open. 2.Insert the key in the ignition. 3.Turn the key to the on and off position 3 times. 4.Remove the key from the ignition. 5.After door open chime stops, press the door open button 3 times. 6.After chime, press any fob key twice. 7.After second chime, press any fob key twice again. 8.After third chime, press any fob key twice again. 9.Press the door open button once. 10.The car should give another acknowledgement chime. 11.Test key fob. This DOES work. I just programmed mine successfully today, three hours ago.