Question about 1996 Jeep Cherokee Sport

1 Answer

1996 Jeep Cherokee Turn Signals Not Working

My flashers work but my turn signals are not. I have fixed one electrical problem after another, but this has me confused. I had trouble with the ignition harness after installing a remote starter because of the extra wires in the steering column. After rearranging the wires, I no longer had problems with the ignition switch, but my turn signals stopped working. Could it be the switch or the turn signal flasher? Can anyone help?

Posted by on

  • Anonymous Mar 18, 2009

    turn signal problems

  • Richard Scordino May 11, 2010

    could be either one or a need to check electrically and see what's going on. Maybe unplugged something while working?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Replace you turn signal flasher relay, it should be right by your fuse box or near the brake pedal.(it looks like a solenoid, a cylindrical shape, with 3 prongs on the end) it is attached to a wiring harness that you just have to unplug it from. i couldnt find mine at any auto parts store, had to go to jeep, costs 44 bucks. that should do it

Posted on Sep 09, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Turn signals do not work but flashers do

There should be a flasher for the hazards and another for the turn signals.

Sep 04, 2012 | 1996 Jeep Grand Cherokee

3 Answers

I have a 2002 jeep grand cherokee and my turn signals stopped working. My hazard lights are working fine. Lights are working also. But im not getting a light on the dash for my turn signals.

I have the same issue. I took the flasher relay out, inspected the pieces for any hairline fractures on the circuit board, nothing it was clean. On my jeep, the turn signals always work in the Spring, Summer, Fall months, but as soon as Winter hits I loose my turn signals. Also, I know it is temperature related because I drive around for a half hour and the signals work again. It is really strange, I think the issue is somewhere in the ground wire, I will be checking that next and will post any new information. Anybody else who has had this issue and correlation I would certainly like to hear about any solutions. Thanks

May 03, 2012 | 2002 Jeep Grand Cherokee

1 Answer

1996 Jeep Cherokee turn signals not working

If you are check fuses and bulbs, I suggtes FLASHER unit (underdash) replacemement.

Hope helps.

Jun 27, 2011 | 1996 Jeep Cherokee

1 Answer

My 99 jeep cherokee turn signals and hazards ARE NOT WORKING.everything else works dnt even make the clicking noise like it should.the fuses are fine.wut else could it be?

You'll need to locate your "turn signal flasher" and replace it. You'll find it in either of the 2 fuse boxes, the owner's manual will have it listed. They are usually a small square box with 2 or 3 electrical prongs that just unplug and plug back into the slots. Please rate this answer, thanks.

Feb 01, 2011 | 1996 Jeep Cherokee

1 Answer

My signals and flasher quit working 2002, Jeep Grand Cherokee

in your vehicles owner manual, look up fuses, and flasher units or flasher relay. Fuses are normally located under the dash, but when both turn signals quit working it is usually the relay. The relay is located under the hood yours owners manual should show you the location.

Oct 27, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Emergency flashers work but turn signals dont

Your signals work on a seperate system then your flashers. Sounds like your multifunction switch is busted.

Apr 07, 2009 | 2003 Jeep Grand Cherokee

2 Answers

Turn signals not working on 1998 Jeep Grand Cherokee

the problem is the turn signal flasher module.

Apr 02, 2009 | 1998 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

758 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides