Question about 1995 Chrysler Concorde

Open Question

Driver's power seat inop on one side only. Won't move forward.

1995 Chrysler Concorde. Was told "cable" broken?? How to repair??

Posted by on

  • yadayada
    yadayada May 11, 2010

    the cable they refer to is the drive cable from the motor, u will need to remove seat to replace any of the drive cables.

×

6 Suggested Answers

beauman
  • 60 Answers

SOURCE: 1995 Chrysler Condorde air conditioning problem

it can be a relay prob or it might be that the a/c coolant, the R-134a (this is what they replaced freon with), may be low and that you may have to just top it off because the pressure switch within your a/c system may not be engaging because of that.

Posted on Aug 13, 2008

  • 27 Answers

SOURCE: heater core

its a pretty big job. Basically the entire dash has to come apart to get to the heater core

Posted on Sep 10, 2008

  • 1 Answer

SOURCE: driver side power seat front to back motor stuck forward

Take apart the drive box in front of seat track, on both sides with an allen wrench. You can then push the seat to get at the bolts to remove it. My trolley drive motor had bad brushes. I am now looking to replace the motor, if I can find the replacement.

Posted on May 04, 2009

delgriffith
  • 97 Answers

SOURCE: 99 Chrysler Concorde electrical problem

probably a relay. relays control switching of power from one compound circuit to another. because you have multiple circuits that are not working, this sounds likely. get a wiring schematic and find out which relay controls that system, then try replacing it.

Posted on Jun 18, 2009

carlsbiz
  • 1124 Answers

SOURCE: how many quarts of transmission fluid does a 1995

That depends if you are talking about dropping the pan only - or fluid for the entire trani including the tourque converter..

If only dropping the pan - it should be about 3 to 5 quarts..

It its for the hole trani & tc - it should be 6 to 9 quarts..

Rate me good ;o)

Posted on Jul 09, 2009

  • 2 Answers

SOURCE: 1995 chrysler concorde electric cooling fan does

if your talking about the cooling fan for the radiater then it could be the cable at the bottom the harmonic ballancer rubs and cuts it

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side electric seat is stuck in the far forward position and won't move. How do I move it manually or fix the motor.


Auto Repair: How to Replace a Power Seat Motor - YouTube

? 1:44
https://www.youtube.com/watch?v=EDh-0rs5Fjo
Oct 26, 2010 - Uploaded by automdvideos
Auto Repair: How to Replace a Power Seat Motor ... 2007 - 2008 Ford Expedition/Lincoln Navigator Driver Bottom Install Video ...2003-2006 Chevy/GMC Seat Cover Install 1 of 3 - eBay Ready ...2000 Ford Explorer Front Seat Track Stuck Motor Repair - Duration: 4:39. by cubmancan 4,959 views. 4:39.
Drivers seat is dead! No power seat or heat. - TheDieselGarage.comwww.thedieselgarage.com/.../96465-drivers-seat-dead-no-power-seat-hea...Mar 22, 2010 - 2003-2005 Chevrolet Avalanche, Silverado, Suburban, Tahoe 2003-2005.... Power seat on driver side didn't work.....passenger did! Neither ...DANG electric seat ' Chevy Truck Forum ' GM Truck Clubwww.gmtruckclub.com/forum/threads/dang-electric-seat.2990/Apr 27, 2006 - 10 posts - ‎7 authors'03 Tahoe My driver seat just stopped, of corse not where I need it, the ... I have a 2003Tahoe and both heated seats are not working. ... with my seat heater on the drivers seat in my 03 Avalanche, it turns ... The driver's side on my Silverado gets way warmer than the passenger side. ... Frozen New Member.Power Seat Problems?? - Tahoe Forum - Che

Dec 29, 2015 | 2003 Chevrolet Avalanche

1 Answer

2009 impala driver side power seat won't move up/down, makes whirring sound when attempted. Moves forward backward. Passenger seat works properly.


Before you do any of the expensive things disconnect and reconnect the wiring to the seat I had the same exact problem with my 2009 Chevy Impala and was ready to take it to the dealer when I disconnected the power cables to it and reconnected them I found that one of the Harnesses was loose and the problem was solved

Sep 12, 2012 | 2009 Chevrolet Impala

1 Answer

Why won't electric seats work?


Check the fuses, if those are good and that is a bench seat, test the control, if the control is good replace the electric motor.

Nov 23, 2011 | 1991 Chrysler New Yorker

2 Answers

I am having trouble with my 94 Chrysler concorde the motorized driver seat isn't moving positions and I have tried everything, I don't want to force it cause I don't want to break the seat, please, any...


the seat adjuster assembly is bad. i was a chrysler tech for 15 years. the motor that runs the forward and back is either bad or the tracks are bad and it is binding. you can not get parts for it. you will have to buy a new complete adjuster or see if a boneyard may have a good used aseembly. Don

Mar 06, 2011 | Chrysler Concorde Cars & Trucks

1 Answer

How to repair a rocker arm on a 1995 chrysler concorde


Carefully remove the entire rocker assembly then replace the broken or worn individual rocker arm and reassemble..can be obtained at any Chrysler/Jeep Dealership...Ur Velcum

Jul 12, 2010 | 1995 Chrysler Concorde

1 Answer

Front power seat does not go back and forth. how


Under the seat you'll see two motor driven cables, the one that goes to the front /rear track can be uncoupled from the track. Place the seat in the position you reqire and replace the cable.

Nov 15, 2009 | 2001 Chrysler Concorde

1 Answer

91 Camry Seat belt and power winodws on Passenger side Inop


More than likely, you have a broken wire or two between the body and the driver side front door. This is a very common issue with those cars when tey get older.

Oct 09, 2009 | 1991 Toyota Camry

1 Answer

Chrysler concorde car wont shift from reverse to park


it sounds like your gearshift cable is broken..if you can jack up vehicle and support it safely,get someone to move shifter and look on driver's side of transmission and see if linkage is moving on trans..linkage is up near top of trans..i have seen this problem before

Jul 30, 2009 | 2000 Chrysler Concorde

2 Answers

1995 Chrysler Cirrus


I dont know about your car but I have a lever on the side of the seat, bottom part, by door. It slides out and you can push down and it will ajust the seat up or down. sometimes it will ride up on its own, and I just push it down again firm and it should stay. Hope this works for you.

Aug 02, 2008 | 1995 Chrysler Cirrus

Not finding what you are looking for?
1995 Chrysler Concorde Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...