Question about 1999 Mitsubishi Montero

1 Answer

Pajero IO (auto) Super select 4WD-i problems

Hi everyone. I had a problem with shifting the lever from 4HLC to 4H. It seems like some kind of locking system that I can't even shift the gear. I already try put the automatic transmission gear to "N" Neutral and still the 4WD gear will not shift. the straight line and reverse tips also didnt help. Anybody can help me with this?

thanks in advance.
Darnie

Posted by on

  • david_cronen Feb 27, 2009

    Ok will do. Thank you djicenova.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 319 Answers

Check Linkage for the 4WD transfer case, between the shifter and the case. if it is a direct case mounted shifter, you may need to remove it and check for obstruction.

Have you tried to shift it to 4H while at a slow roll in N? Sometimes that used to work for me in my older floor mount 4WD truck. Give it try!

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does 2H means in a pajero 2001


Two wheel drive high range, Please check the drivers manual. All will be explained there.

Mar 04, 2016 | Cars & Trucks

1 Answer

What 2h 4h 4hlc 4llc is used for in a pajero


  1. The Mitsubishi Pajero Owners Club® :: View topic - 2H / 4H ... www.pocuk.com/forums/viewtopic.php?t=52960
    • 2 POSTS
    • FIRST POST: 2006-10-07
    2006-10-07 · pajero owners club,pajero,owners,club,pajero club,pajero insurance,insurance,pajero website,car,cars,mitsubishi,yellow diamond,four,4,wheel ... 2H / 4H / 4HLc / 4LLc ...
  2. When do you engage 4h, 4hlc or 4Llc? - Pajero 4WD Club of ... www2.pajeroclub.com.au > ... > Vehicles > Generation 4-2 Pajero
    • 33 POSTS
    When do you engage 4h, 4hlc or 4Llc? Generation 4-2 Pajero User Name: Remember Me? ... with 225 wide tyres got bogged instantly in 4H! I was still in 2H!
  3. Pajero 4WD WHEN WHAT. . . .... - Pajero Owners Club UAE ... https://www.facebook.com/permalink.php?id=435094183183229&story... Pajero 4WD WHEN WHAT. . . . ... Well these seemingly obfuscating things at first ( 2H 4H 4hlc 4LLc ) is what making our PAJERO a TRUE OFF ROADER !!!
  4. Mitsubishi Pajero Sport: The Prodigy Returns - Top Gear www.topgear.com/.../mitsubishi-pajero-sport-the-prodigy-returns/... Mitsubishi Pajero Sport: The Prodigy Returns. ... 2H, 4H, 4HLc and 4LLc. ... But with the Pajero, you can use 4H on paved surfaces thanks to the centre differential, ...
  5. Super Select - Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Super_Select The interior of a 2007 Mitsubishi Pajero, with the Super Select gearlever visible to the left of the INVECS transmission lever. Super Select is the ... 4HLc and 4LLc ...
  6. Mitsubishi AWC - Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Mitsubishi_AWC According to Mitsubishi, AWC philosophy is put into practice by means of ... (2H, 4H, 4HLc, 4LLc) ... Pajero also features an upgraded version of Mitsubishi's Active ...
  7. Slipping out of 4H and 4HLc - Pajero 4WD Club of Victoria ... www2.pajeroclub.com.au > ... > Vehicles > Generation 3 Pajero
    • 29 POSTS
    Slipping out of 4H and 4HLc Generation 3 Pajero ... Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 3 Pajero: Slipping out of 4H and 4HLc
  8. Mitsubishi Super Select 4wd and Super Select II www.offroadaussie.com/2013/06/mitsubishi-super-select-4wd The Mitsubishi Super Select 4wd system provides drivers with the ... When changing from 2H to 4H, ... So there is a gear lever that changes between 2h, 4h, 4hlc and 4llc.
  9. Pajero Owners Club of South Africa & 4H to 4HLc ... pajeroclub.co.za/forum/viewtopic.php?t=2318
    • 10 POSTS
    • FIRST POST: 2011-05-11
    2011-08-16 · I know on my 3.5 V6 I can move from 2H to 4H while on the move with ... Only 4HLc to 4LLc requires you to stop and put ... 2003 Mitsubishi Pajero 3.2 DiD ...
  10. HDC ????????????? ?? Mitsubishi Pajero Sport 2015 ... www.youtube.com/watch?v=YKg0Ro8BmU4
    • BY WICHETTT THAMRUNGPITAK
    • 4 MIN
    • 12K VIEWS
    2015-10-21 · ... 2015 ??????? 2H,4H, 4HLc, 4LLc ... Pajero Sport 2015 (4H ... New Pajero Sport 4x4 _Test Drive by ...
  11. Pagination

Mar 04, 2016 | Cars & Trucks

1 Answer

The 4 wheel engager shift is stuck and wont go back for 2 wheel drive


check underneath for mud/ rocks or rust that is not allowing the movement.

Dec 14, 2013 | 1992 Mitsubishi Pajero

1 Answer

Imitsubishi shogun engaging 4 wheel drive


no year?
never drive, part time 4wd on pavement, unless said pavement
is ice or snow covered.
only AWD allows pavement (tires direct upon) driviing.
part time 4wd is for offroad , off pavement driving,
this is because 4wd has no center differential.
http://en.wikipedia.org/wiki/Four-wheel_drive

and with out such, winds up the drive line fast. and breaks it.

wiki states (no year stated by you)
Part-time four-wheel drive was standard on all models. to 1991
then came
ActivTrak 4WD
cept
4H (high-range full time four-wheel drive), 4HLc (high-range four-wheel drive with locked center differential) and 4LLc (low-range four-wheel drive with locked center differential
so do not use LOCKED on pavement. on active track. only 4H
the wiki states the Super-select is retained 2006 to present.
Super-Select 4WD II

read the glove box manual under 4wd

Oct 16, 2013 | Cars & Trucks

1 Answer

How do I turn 4wd on?


    • 1 Start your Dodge truck's engine.
    • 2 Turn the electronic transfer case from "2WD" to "4WD Lock" to engage the high range 4WD, if the dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" to "4H." The electronic transfer case is located on the instrument panel and is marked with "2WD," "4WD Lock" and 4WD Low." The lever-equipped transfer case is located to the right of your leg and is marked with "2H," "4H" and "4L."
    • 3 Shift the transmission into "Neutral" while the vehicle is either stopped or rolling at 2 to 3 mph to begin engaging in the low range 4WD. Turn the electronic transfer case to "4WD Low," if the Dodge truck is equipped with an electronic transfer case; otherwise, shift the transfer case lever from "2H" or "4H" to "4L."
    Tips & Warnings
    • Indicator lights will come on and alert you that your vehicle is in either the high or low range of 4WD.
    • Do not engage in the low range of 4WD drive if the transmission is in gear; you must shift to "Neutral" first.
    • Many Dodge trucks allow you to shift from 2-wheel drive to the high range of 4WD at up to 55 mph--consult your truck's manual to ensure that this is possible. Do not exceed 55 mph while engaged in the high range of 4WD. Do not exceed 25 mph while engaged in the low range of 4WD.
    • Do not engage in 4WD unless you are on slipper or rocky roads.

Sep 02, 2011 | 2005 Dodge Dakota

1 Answer

HOW TO SHIFT TO 4 WHEEL DRIVE


Hi - Here is instruction how to do.

From N to 4H

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H".

From 4H to 4H LOCK

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H LOCK".

If the vehicle is moving, we recommend

that the speed be less than 100 km/h (60

mph) during this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H LOCK to 4L LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4L LOCK".

From 4L LOCK to 4H LOCK

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to shift into "4H LOCK".

From 4H LOCK to 4H

You can operate the transfer switch either

when the vehicle is stopped or while the

vehicle is moving.

Position the front wheels straight ahead

and turn the switch to shift into "4H". If the

vehicle is moving, we recommend that the

speed be less than 100 km/h (60 mph) during

this operation.

NOTE:

• When shifting between the transfer

switch position and the transfer gear

position is unmatched, all 4WD indicators

will blink and the buzzer will sound.

• If it is difficult to shift between "4H" and

"4H LOCK" while the vehicle is moving,

try accelerating and decelerating your

vehicle several times after turning the

transfer switch. Be sure to wait until traffic

conditions allow you to accelerate and

decelerate safety before using this procedure.

From 4H to N

64J209

Stop the vehicle completely, place the

transmission in "N" (Neutral) and depress

the brake pedal and the clutch pedal fully

(if equipped), then push in and turn the

switch to the mark (1) at the left of the "N"
position, and hold the switch in this posi-

tion for 5 seconds until the "N" indicator

blinks, then turn the switch to the "N" position.

When you turn the transfer switch to the

"N" position, "N" indicator will come on with

the buzzer sound.

CAUTION

• Be sure to stop the vehicle completely

before operating the transfer

switch to shift between "N" and

"4H", or between "4H LOCK" and

"4L LOCK".

• Do not shift between "4H" and "4H

LOCK" unless the front wheels are

in the straight-ahead position and

we recommend that the vehicle

speed be less than 100 km/h (60

mph).

Do not operate the transfer switch

while tires are racing.

• Do not operate your vehicle in "4H

LOCK" or "4L LOCK" on dry, hard

surfaces.

(Continued)

CAUTION

(Continued)

• Do not operate the vehicle while a

4WD mode indicator is blinking

except when shifting between "4H"

and "4L LOCK".

If you operate the vehicle while a

4WD mode indicator is blinking, a

buzzer will sound and the transfer

will shift to "N" (Neutral) to prevent

transfer case damage.

In this case, use the following procedure.

1) Depress the clutch pedal fully (if

equipped) or shift the automatic

transmission gearshift lever to the

"N" position.

2) Turn the transfer switch to the

position previously selected.
3) Operate the transfer switch again.

Feb 01, 2011 | 2007 Suzuki Grand Vitara 4WD

1 Answer

How do I set car to be on 4x4?


I believe that Mitsubishi has one of the best and easiest 4X4 selector systems on the Pajero/ Montero. Just below the gear shifter lever is the 4X4 mode selector. A lever like the gear shifter that works in a up, down movement. On your dash board you will notice a sort of axle, chassis diagram in green light. In normal 2WD or 2H mode the lever is set all the way back and on the dash only the rear wheels a lite up in green light on the axle, chassis diagram. This is for normal driving on the highway and smooth roads of dry dirt roads. Pushing the lever up wards while moving at crawling speed will engage the light 4X4 mode which is 4H for when the driving gets a little slippery. All 4 wheels on the axle/ chassis diagram will be lite green. Shifting the lever from the 4H position to the left and upwards will engage the 4HLc mode for 4X4 on sand and deep snow. This will also engage the central diff lock which will show on the axle/ chassis diagram on the dash board with the center box also lite up. Further up from the 4HLc mode and while pushing down on the 4X4 lever push it to the top most position, but only do this when at a stand still with your foot on the brake pedal. This will engage the 4LLc mode with 4X4 and central diff lock on for when driving gets sweaty on thick mud up and incline. To disengage this mode stop, foot on break put it in P and then pull down the lever to one of the lower settings.

Jan 13, 2011 | 1997 Mitsubishi Montero

3 Answers

Blinking Center Diff Light while vehicle on the move.


The pajero has a limp mode for when there is an issue with the 4x4 system. The ECU apparently limits the vehicles capabilities until the problem is fixed. By turning the car off and on again you are reseting the fail-safe until it again triggers. The fault may be that a part of the drive train, secondary transfer case or auto locking hubs is not working correctly. For my Pajero, the auto hubs were not disengaging. This was later found to be caused by sticking air solendoids. Each solenoids cost was about $200 and there are two for the hubs. I was able to free them up by soaking the solenoids in CRC/ WD40 and a bit inside the air tubes as well plus repeatedly engaging and disengaging the 4x4 lever to activate the hubs. The auto hubs may not be the issue in your case but its worth a try.

Apr 14, 2009 | 2000 Mitsubishi Montero

1 Answer

Mitsubishi delicia 2.6 td (shogun engine). fails to release from 4wd so two front wheel lights flashing on dash. Its an auto but have tried usual things like re-engage then disengage and straight line...


Check the super select solenoids. I had the same problem with my pajero/montero io, when I released 4WD from 4H to 2H the two front wheels lights started flashing. They stopped flashing and was solid on when I re-engaged the 4WD (2H to 4H).

My problem was a failure in the 2H solenoid, it was not producing enough vacuum. The problem was intermitent at the begining and then was permanent.

I checked the solenoids in this way:
1) The solenoid that receives the vacuum in the botton is for 2H
2) The solenoid that receives the vacuum in the top is for 4H
3) Both solenoids operate in the same way, they only change in the way they transfering vacuum from top/botton to the exit pipe (2H or 4H). The difference is that one has the vacuum input on the top and the another one in the botton.
4) The default position when you disconnect the electronics is 4WD
5) Try disconnecting the electronics and switching the output pipe between the solenoids. This will put the solenoids on 4WD position and you changed the pipes, so the 4WD should disengage.

4WD should disengage if your 4H solenoid is OK, the ligths should now flash when you change from 2H to 4H because 4WD cannot engage because the pipes are switched. You can also check the vacuum of each solenoid with your finger on each one.

If this doesn't work, try to bypass the solenoids and connect the input vacuum hose to the 2H output pipe. If the lights doesn't turn off in 2H mode it's posible that you have different problem.

Also check this address: http://4wd.blogeasy.com/article.view.run?articleID=318776

Good luck.

Jul 25, 2008 | Mitsubishi Pickup Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

1,602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...