Left Signal light isnt blinking on my 2000 300M Chrysler
The front driver side signal light isnt blinking. However, the light bulb is still lit. The rear blinker on the driver side is blinking twice as fast. Is it an electrical issue or do I need to change the bulb even though it is still lit but not blinking?
Also how do I take it out the signal light and replace it?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This may have more then one bulb in the front or possibly a bad socket try wiggling the new bulb in the socket to see if it will work.Compare all turn signal lights that come on the passenger side to those drivers side.Some vehicles also incorporate sidemarker lights with the turn signals.
What you speak of as to the left blinker doesn't flash, yet the instrument cluster shows the green arrow (to the left), and yet that and the left turn signal lights do not flash, appears to be a simple burned out bulb. If one of your left turn signal bulbs are burnt out, then the #552 Flasher Unit in your fuse box is NOT the cause. It's the "Amperage" not being correct to the flasher unit. Place the parking brake on and start your vehicle. Put the left turn signal on and check to see ALL the bulbs are illuminated for the left turn signal. If you find one bulb that is not illuminated, then replace the bulb. It should be an 1157 bulb, but in the front it could be a 1157 Amber bulb dependent on whether your turn signal lens is clear or yellow.
If you still have difficulty finding the dead bulb, turn on the right turn signal and see which bulbs are illuminated and this will give you an idea as to which bulb on the left side isn't working, or turn on your Emergency Flashers which will turn on both the left and right side lamps and see which bulb is not lit up.
Double check your front drivers side bulb sounds to me like the bulb is bad. It may look ok but could be bad. You might try swapping bulbs between the right and left front lights to test it. If the problem moves to the other side then you've found your problem. Good luck.
What may have happened is either the headlights wiring or the parking lights wiring somewhere along the wiring fused to the left turn signals wiring. Depending on if the turn signals go on when you put the parking lights on or the headlights on.
If the signals come on when you turn on the headlights than you only need to locate the light green wire that comes off the left turn signal harness.
Next follow that wire the entire way back to the firewall looking for another wire fused to that wire as you go.
If there are no signs of this you need to continue looking on the other side of the firewall all the way back to the turn signal and hazard flasher unit which is a black box that connects to a black harness located next to a grey harness behind the knee bolster.
But if the signals come on when you turn on the parking lights than you will also need to check the wiring from the rear left signal and follow that light green wire all the way back to the turn signal and hazard flasher unit.
This should fix your problem, but if not than your problem may lay within the the wiring between the turn signal/hazard switches and the turn signal and hazard flasher unit.
Also you may have a burnt circuit in the junction block. This block is where the light green from the rear left signal and front left signal meet. Don't have a description but if you cannot find it let me know and I will go out to the yard and look myself and let you know.