Question about 2000 Suzuki Esteem

Open Question

Crankshaft diameter specs - 2000 Suzuki Esteem 1.8L

Does anyone know what the crankshaft dia tolerance specs are for the above engine.
Need to determine if standard rod bearings will work or if the crank
will need to be turned

Posted by on

5 Suggested Answers

boysor2933
  • 293 Answers

SOURCE: I have a 1997 Suzuki Esteem. What should the

29 to 37 psi.

Posted on Aug 10, 2009


  • 198 Answers

SOURCE: Engine pinning when accelerating only on cold Suzuki Baleno

Carbon build up on pistons raises engine compression.This is normal.Go up one grade on gas and/or put some fuel additive.If this doesnt solve it,have timing belt/chain inspected may need replaced

Posted on Sep 15, 2009

chitownbob45
  • 316 Answers

SOURCE: removing and installing a radiator in a 2000 Suzuki esteem.

auto zone

Posted on Oct 04, 2009

  • 563 Answers

SOURCE: Is valve adjustment a part of normal maitenance on Suzuki Esteem

When you hear some tapping, that's why you need -valve adjustments. At 137,000miles you probably need more than that to continue your trouble-free drives.

Posted on Nov 12, 2009

  • 1 Answer

SOURCE: how do i changing alternator suzuki esteem 2001

take it to a mechanic trust me, i had to replace mine after 6 days of trying to figure out how to remove the bottom bolt i took it to a shop if you need to know more email me KRAGAR33@AOL.COM

Posted on Dec 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need manual for 2000 suzuki esteem 1.8 engine


for the whole car? or what?
I'll answer the car.
the dealer has the thing a book called the FSM buy one.
or here, get the $4 pass
https://suzukipitstopplus.com/Products/1182-1999-2000-esteem-service-manual.aspx

or at alldata for $15 bucks.
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

ENGINE: the under stroked 2.0L
here is an engine page.
and this engine fits Sidekicks and is same as 2.0L too.
so .
http://fixkick.com/one-point-eight.html


Feb 22, 2014 | 2000 Suzuki Esteem

1 Answer

I would like to know the order of the igniton coils of a 2000 Suzuki Esteem Wagon 1.8L?


WELL I SEE 1.6L 2000 MODEL STAND FRONT VECHICLE LOOKING AT COILS FIRST TWO COILS FACING YOU IN ORDER IS 4 1 3 2 THE FIRING ORDER IS 1 3 4 2 AND LOOKING AT ENGINE AT CRANKSHAFT PULLEY END LEFT TO RIGHT CYLINDERS ARE 1 2 3 4

Jul 05, 2011 | Suzuki Esteem Cars & Trucks

1 Answer

Where location crank sensor suzuki esteem 2000


On the Esteem 1.6L: the Crankshaft Position Sensor is located on the right side (passenger side) of the engine Oil Pan.

For the Esteem 2.0L: the CKP is located behind the engine Flywheel in the back of the engine block. It is necessary to remove the transmission to service the sensor.

Dec 27, 2010 | 2000 Suzuki Esteem

1 Answer

The correct radiator for suzuki esteem wagon 1.8 is difficult to locate.


hi am having trouble to find a radiator for my suzuki esteem wagon 1.8 if anyone know any web site or the corrects size please let me now asap thank you angelicarivera123@gmail.com

Aug 23, 2010 | 2000 Suzuki Esteem

1 Answer

2000 Suzuki Esteem (1.8) Fuel System


No SYMPTOMS stated, (sadly)
the J18 engines, twin cam, chain drive cam, nice motor.
an under stroked, J20. it is.. and share most parts.

alldata.com covers it.... and all cars... mostly.
for sure esteems (used books real off Ebay, if lucky, do a watch on ebay)?
and for sure Suzuki, the FSM is $4 to read. and posted 100 time here. (more ) this the real deal, (McCoy)
https://suzukipitstopplus.com/Products/1182-2000-esteem-service-manual.aspx

the filter, and pump , no need to replace pump unless
it has 12vdc to IT CRANKING< and filter is new. AND, pressure is out of spec. (see spec, below)
a gauge is $20 and way more easy to use than a bath in gasoline
for sure.and a $10 voltmeter from walfart.

now the Esteem secret (just in CASE)
"Remove rear seat cushion, rear right seat back, right side sill scuff, right front partition trim and right rear door opening trim."
bingo, a secret access port.

now the spec.
31-37 ?idle PSI
this is the fuel pressure at the rail, at idle.
cranking is 6 PSI more
driving up hill, wide open throttle, pressure rises to 3- 6psi more that idle. (near)
if pressure is low, check for 12vdc to pump, first.
then make sure the FPR works.
they can stick open closed or jam. and it must work right. or fueling will be ALL wrong. (cars this old FPR love to fail)
this engine ECU has program revision (flash) that causes
pump to not run key on, (read TSBs on same at suzuki...)

so, crank it and check pressure cranking if not starting?
or if it does start (you never said) then check at idle
and WOT. the PSI ( then gun throttle see pressure jump way higher) if all this pans out, forget pump, and FPR.

did you scan the PCM yet, that be like first..
all scan tools (real) work on 2000 cars.... all do.

Dec 14, 2009 | 2000 Suzuki Esteem

2 Answers

Is valve adjustment a part of normal maitenance on Suzuki Esteem


When you hear some tapping, that's why you need -valve adjustments. At 137,000miles you probably need more than that to continue your trouble-free drives.

Nov 12, 2009 | 2000 Suzuki Esteem

1 Answer

Engine pinning when accelerating only on cold Suzuki Baleno


Carbon build up on pistons raises engine compression.This is normal.Go up one grade on gas and/or put some fuel additive.If this doesnt solve it,have timing belt/chain inspected may need replaced

Sep 15, 2009 | 1999 Suzuki Esteem

Not finding what you are looking for?
2000 Suzuki Esteem Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...