Question about 1999 Dodge Durango

1 Answer

1999 dodge durango front caliper pin bolts

I changed the brake pads and rotors on my 1999 dodge durango
the top pin bolts tightened and loosend correctly the bottoms
on both sides the threads were stripped which are only about a
quarter inch thick.
is there a repair kit to retap the threads and new pin bolts?
i could see a new pin bolt that has a larger threaded area with
the pin size the same, and the kit has a drill bit and a tap.
this could be a easy repair if a kit was made.
there no way a durango owner should have to buy and replace the
spindles for this problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

Yes there is this happens more than you can Imagen .NAPA carry' s this kit .but you will need a drill with bits the kit will tell you what size and how to go about the job.

Posted on Feb 27, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 98 durango one caliper bolt on front passenger side came out I put new one in and now the brake seems to be locking up


William, did you use the correct bolt(length), did you check all brackets, sliders, seized caliper, pads for damage, free movement, etc.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Replace Brake Pads and Rotors Dodge Durango Dakota 97 03...

How To Replace the Front Brakes on 98 03 Durango

How To Replace Front Pads And Rotors Dodge Dakota

Mar 21, 2016 | Cars & Trucks

1 Answer

How do you change front brake pads on an Audi A6 2006


How to change front brake pads & rotors (brake disc) on 2006 Audi A6:

Atention!!!
Don't disconnect any brake line from caliper!
Don't disconnect any ABS sensor!
For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:

1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Remove brake carrier from wheel bearing housing (two ribbed bolts). 125 Nm
7. Remove brake disc from wheel hub.
8. Install brake carrier on wheel bearing housing. Tightening torque for two ribbed bolts = 125 Nm.
9. Check up the brake fluid level on the reservor, and emptying if neccessary!
10. Push piston back into brake caliper housing.
11. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
12. Install outer brake pad into brake carrier.
13. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
14. Install both caps.
15. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!!

Nov 26, 2010 | 2006 Audi A6

1 Answer

Brake job front pads


PLEASE DON'T FORGET TO RATE. THANK YOU:

Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Inspect the fluid level in the brake master cylinder reservoir.
  3. If the brake fluid level is midway between the maximum-full point and the minimum allowable level, then no brake fluid needs to be removed from the reservoir before proceeding. If the brake fluid level is higher than midway between the maximum-full point and the minimum allowable level, then remove brake fluid to the midway point before proceeding.
  4. Raise and suitably support the vehicle.
  5. Remove the tire and the wheel assembly.
  6. Hand-tighten 2 wheel lug nuts in order to retain the rotor to the hub.
  7. Install a large C-clamp over the top of the caliper housing and against the back of the outboard pad.
  8. Slowly tighten the C-clamp until the piston pushes into the caliper bore enough to slide the caliper off the rotor.
  9. Remove the C-clamp from the caliper.

2ca7855.gif
Front brake pads and related parts

  1. Remove the lower caliper bolt (1).

    WARNING Use care to avoid damaging pin boot when rotating caliper.

  2. In order to access the pads, rotate the caliper upward and suitably support it.
  3. Remove the pads (5) from the caliper bracket (3).
  4. Remove the 2 retainer slides (4) from the caliper bracket (3).
  5. Inspect all parts for cuts, tears, or deterioration. Replace any damaged parts.
  6. Inspect the caliper bolts for corrosion or damage. If corrosion is found, use new caliper bolts when installing the caliper.
To install:
  1. Using a C-clamp, bottom the piston into the caliper bore. Use an old brake pad or wooden block across the face of the piston. Do not damage the piston or the caliper boot.
Install the 2 retainers to the caliper bracket.

NOTE The wear sensor is on the outside pad. The sensor is positioned at the leading or upward edge of the pad during forward wheel rotation.


Install the pads to the caliper anchor bracket.

  1. WARNING
  1. Use care to avoid damaging pin boot when rotating caliper.

  1. Remove the support and reposition the caliper (2) back down over the front pads.
  2. Lubricate the pin bolt and the inner diameter of the bolt boot with GM P/N 18047666, or equivalent. Do not lubricate the threads of the pin bolt.
  3. Install the lower caliper bolt. Tighten the caliper bolts to 70 ft. lbs. (95 Nm).
  4. Remove the 2 wheel lug nuts retaining the rotor to the hub.
  5. Install the tire and the wheel assembly.
  6. Lower the vehicle.
  7. With the engine OFF, gradually apply the brake pedal to approximately 2/3 of its travel distance.
  8. Slowly release the brake pedal.
  9. Wait 15 seconds, then, repeat steps 10 and 11 until a firm brake pedal is obtained. This will properly seat the brake caliper pistons and brake pads.
  10. Fill the brake master cylinder reservoir to the proper level.
  11. Burnish the pads and rotors.

Sep 13, 2010 | 2006 Buick LaCrosse

1 Answer

How edo i remove the front brakes from my 2006


You will have to remove each front wheel. I recommend doing one side at a time so you can use the other side as a guide if you need a model for reassembly.

There will be two threaded caliper bolts that hold the caliper on. Remove those, and carefully pry/lift the caliper off its bracket. This is good time to inspect your rotors, and if they are really pitted or rusted on the surface where the pads contact them, have them turned or replace if economical to do so.

Before installing the new pads, you will need a good old C clamp to reseat the caliper piston back inside the caliper.

Its good to also clean up those caliper guide pins and apply a small amount of grease to keep them working right.

Then, insert new pads onto caliper and reinstall assembly back onto bracket.

NOTE: Be very careful when tightening those caliper bolts as they are very easy to break/strip, and you really do not want to "go there"

Your local parts store should be able to tell you the torque specs fort those bolts, or look it up on the net.

Once one side is done, do the the other one. After that, press the brake pedal several times and be sure you have a good firm pedal before going for the test drive.

Apr 17, 2010 | 2006 Dodge Durango

1 Answer

To change all four wheels breaks what do I need 2006 dodge charger


I am going to assume since you have a late model car that you have 4 wheel disc brakes. You will need to take all four wheels off to get to the caliper. The caliper is usually held on with two bolts or pins. Sometimes there are retaining springs on the back of the bolt or pin, so double check for these. There is one pin/bolt in the front and one in back of the caliper. These are called floating calipers. You will need to take both bolts out and then give the caliper a smack with you hand or a small hammer and it will pop loose. The caliper needs to to be moved up over the rotor.

Take the caliper off the rotor. At this point it will be hanging from the brake line. Be careful with it, if you let it hang it could damage the brake line. You can lay the caliper on top of the rotor and pull the pads out of the caliper. If you do not have a caliper piston compression tool get a very large pair of channel locks and wrap a rag around the jaws. Use the channel locks to compress the pistons in the cliper as far as they will go. The new pads will be a lot thicker and if you do not compress the caliper you will never get them back on with the news pads. The point of the rag is so you do not score the pistons in your caliper.

The pads may or may not come with anti-squeal jel/grease. I would get some if they dont. You apply this to the back of the pad before installation. The new pads have spring clips on the back that just slip over slots in the calipers. Before careful not to confuse the front pad with the back pad upon removal, they can look really similiar in size and shape and sometimes you can install the wrong one in the wrong location and it will not function correctly.

Place your pads into you caliper then put the caliper back on the rotor. Put the bolts back into the caliper and tighten them down. I am unsure of the torque specs for your caliber bolts, but tight and a quarter of a turn more is a good rule of thumb.

Follow the above procedure for all 4 wheels.

Apr 09, 2010 | 2006 Dodge Charger

1 Answer

Brake pad replacement


Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    • Negative battery cable
    • Front wheels
  3. Place a C-clamp over the caliper as illustrated, place a screw drive head against the outboard pad and hook against the rear of the caliper. Slowly tighten the screw drive and retract the caliper pistons into their bores and breaking the outboard brake pad from the caliper fingers.
  4. Once the pad is free, slide the caliper in on the guides to provide clearance between the rotor and inboard pad.
  5. Place an appropriate prytool through the center opening in the top of the caliper behind the inboard pad between the pistons using care not to contact the piston boots. Pry the pad to free it from the pistons.
  6. Remove the two caliper guide pin bolts and position the caliper aside. Remove the brake pads.
ff17c9d.gif
Place a C-clamp over the caliper as illustrated

b802acb.gif
View of the caliper guide pins and boots (1), anti-rattle clips (2), brake rotor (3), outboard pad (4), caliper adapter (5) and inboard pad (6)

To install:
  1. Completely compress the caliper pistons
  2. Install or connect the following:
    • Brake pads with anti-rattle clips onto the adapter
    • Caliper and align the guide pin bolt holes with the guide pins. Install the pin bolts and tighten to 32 ft. lbs. (43 Nm).
    • Banjo bolt with new washers on each side of the hose fitting and tighten to 35 ft. lbs. (47 Nm)
    • Wheels
    • Negative battery cable
  3. Check and adjust the brake system fluid level and road test the vehicle.

Nov 01, 2009 | 2005 Chrysler Pacifica

1 Answer

How do i replace front pads on 2005 chrysler pacifica


PLEASE DON'T FORGET TO RATE!!!!

Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:
    • Negative battery cable
    • Front wheels
  3. Place a C-clamp over the caliper as illustrated, place a screw drive head against the outboard pad and hook against the rear of the caliper. Slowly tighten the screw drive and retract the caliper pistons into their bores and breaking the outboard brake pad from the caliper fingers.
  4. Once the pad is free, slide the caliper in on the guides to provide clearance between the rotor and inboard pad.
  5. Place an appropriate prytool through the center opening in the top of the caliper behind the inboard pad between the pistons using care not to contact the piston boots. Pry the pad to free it from the pistons.
  6. Remove the two caliper guide pin bolts and position the caliper aside. Remove the brake pads.
24539c8.gif
Place a C-clamp over the caliper as illustrated

6ccd8b6.gif
View of the caliper guide pins and boots (1), anti-rattle clips (2), brake rotor (3), outboard pad (4), caliper adapter (5) and inboard pad (6)

To install:
  1. Completely compress the caliper pistons
  2. Install or connect the following:
    • Brake pads with anti-rattle clips onto the adapter
    • Caliper and align the guide pin bolt holes with the guide pins. Install the pin bolts and tighten to 32 ft. lbs. (43 Nm).
    • Banjo bolt with new washers on each side of the hose fitting and tighten to 35 ft. lbs. (47 Nm)
    • Wheels
    • Negative battery cable
  3. Check and adjust the brake system fluid level and road test the vehicle.

Nov 01, 2009 | 2005 Chrysler Pacifica

1 Answer

Worn brake pads


Front brake pad exchange guide.

Step1 Park the Dodge Durango on a flat surface. Put the emergency brake on and put wedges behind the wheels to prevent the vehicle from rolling. Disconnect the negative battery cable from the battery. Drain 2/3 of the brake fluid from the master cylinder, using a syringe. Remove the wheel and the tire assemblies. Step2 Compress the caliper piston back into the caliper bore using a large C-clamp to drive the piston into the bore. Use additional force if it is required. Using a 3/8 inch hex wrench or socket remove the caliper mounting bolts. Step3 Rotate the caliper rearward off the rotor and out from its mount. Remove the inboard and outboard brake pads. Remove the spring clip that holds the inboard brakes in the caliper. Tilt the pad out at the top to unseat the clip. Remove the retaining spring that secures it in the caliper. Unseat one spring end and rotate the pad out of the caliper. Step4 Suspend the caliper assembly from the Durango frame using mechanic's wire. Do not allow the caliper assembly to dangle from the brake hose as this may damage the brake hose. Step5 Clean the surfaces of the caliper and steering knuckle with a wire brush. Apply multi-mileage grease or similar product. Using brake fluid or break cleaner clean the caliper slide pins. Apply a light coating of silicone grease to the pins. Step6 Install the inboard brake pad and it's spring. Install the outboard brake pad. Install the caliper over the rotor and seat it in its original position until it is flush. Using a torque wrench, torque the slide caliper pins to 22 ft./lbs. Step7 Add brake fluid to the master cylinder. Bleed the brakes. Reconnect the negative battery cable to the battery. Start the engine and pump the brakes 3-4 times to seat the brake pads. Reinstall the wheels. Test drive the Durango at slow to moderate speeds to ensure that the maintenance was performed correctly.
Rear brake pad exchange.

Step1 Lift the Durango off the ground with a car jack. Support the vehicle on all sides with jack stands. Keep children and small animals out of the vicinity when you replace the brakes. Step2 Loosen the lug nuts on the wheels with a torque wrench. Remove the wheel and tire assemblies and set them aside, face up, to prevent damage. Step3 Compress the caliper and remove it by lifting the top up and off the caliper adapter. Hang the caliper from the Durango's frame with mechanical wire. Step4 Remove the inboard and outboard brake shoes from the caliper adapter. Take off the top and bottom anti-rattle springs. Keep the springs separated, as they aren't interchangeable. Step5 Press the piston into the bore with a C-clamp. To prevent damage to the pistons, insert an old brake shoe in between the C-clamp and caliper piston. Remove the C-clamp. Step6 Wipe down the caliper mounting adapter and anti-rattle springs with brake cleaner. Grease the anti-rattle springs with brake grease. Install the bottom anti-rattle springs, followed by the top anti-rattle springs. Step7 Install the inboard brake shoes followed by the outboard brake shoes. Replace the caliper and the wheel and tire assemblies. Lower the vehicle to the ground and pump the brakes to seat the pistons.


Please rate and god bless:)


Apr 02, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

69199 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...