Question about 1998 Ford Expedition

Open Question

I have problem whith my 1998 expedition the code PO133

Can i get some solution thank you

Posted by on

  • 4 more comments 
  • elranchero_1 Mar 03, 2009

    code p0133

  • elranchero_1 Mar 04, 2009

    i change h20s upstream before of cat. but the problem still there so and the bank 1 where is the sensor

  • mike loshbough
    mike loshbough May 11, 2010

    on the drivers side exhaust before the cat.

  • mike loshbough
    mike loshbough May 11, 2010

    upstream o2 shorted or open

  • Ronnie Houston May 11, 2010

    what is the problem???

  • mike loshbough
    mike loshbough May 11, 2010

    solution to what ?

×

3 Suggested Answers

  • 132 Answers

SOURCE: i have problem whith my 1998 expedition the code PO354

if you are standing in front of the vehicle looking on the left side cyl #4 is the second one back from the front. Follow the wires to see where coil is. Or it may have coil on plug.

Posted on Feb 08, 2009

  • 186 Answers

SOURCE: solution for 1998 saturn sl

Hello DTC P0341 & P0133 very common saturn Codes.You need to check condition of Plugs & wires,If not New Replace All Plugs & Wires,also I would replace the #1#4 Coil for the P0341.For the P0133 Reaplce your front O2 sensor with an OEM sensor,not an aftermarket.

Posted on May 11, 2009

greg_margo
  • 1959 Answers

SOURCE: I have a fail code (P1409) on my 1998 FOrd Expedition, 4.6L. Where can I get this part? Thanks, Alec

Code indicates bad EGR Vacuum Solenoid. Chilton lists possible causes below. Here's a link to the part you want. Best of luck!
Greg

http://www.rockauto.com/catalog/raframecatalog.php?carcode=1304402&parttype=4964&a=FRc1304402k943582

Possible Causes:

  • EGR VR solenoid circuit is open, or shorted to ground
  • EGR VR circuit is shorted to power or the VPWR circuit is open
  • EGR vacuum regulator solenoid is damaged or the PCM has failed

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I when my 98 volvo s70 2.4L engine has trouble codes po133 & po442?


Po133 is and oxygen sensor code. Replace the front oxygen sensor use a bosch or OE sensor only. P0442 is and evap system leak. Most common fault is a cracked hose at the evap cannister at the right rear of the car.

Mar 19, 2015 | 1998 Volvo S70

1 Answer

My check engin light came on the codes came up as po133, p1000 what do i do to fix my car is a 1998 ford windstar?


A code P0133 may mean that one or more of the following has happened:
  • The oxygen sensor is faulty
  • The wiring to the sensor is broken / frayed
  • There is an exhaust leak
the problem is more than likely the front Bank 1 oxygen sensor. You will likely wind up replacing it but you should also consider these possible solutions:
  • Check and fix any exhaust leaks
  • Check for wiring problems (shorted, frayed wires)
  • Check the frequency and amplitude of the oxygen sensor (advanced)
  • Check for a deteriorating / contaminated oxygen sensor, replace if necessary
  • Check for inlet air leaks
  • Check the MAF sensor for proper operation
  • code p1000 refers to emission monitors not fully run and requires a couple of drive cycles from cold start to fully warmed drive cycle at different speeds.

Oct 10, 2014 | 1998 Ford Windstar

1 Answer

Obd system check -fail


It means that the O2 sensor isn't switching as fast as it should. Make sure there are no vacuum or exhaust leaks. Most Likely you got a lazy O2 sensors which would require replacement.

Apr 17, 2014 | 1998 Saturn SL

1 Answer

I have a 1997 ford expedition 5.4 L with the check engine codes of PO153 and PO133 coming on.... the truck stalls and jumps need to know what part to replace or how many i need?


PO -133 O2 Sensor Slow Response

Po -- 153 same thing


Check for vacuum leaks --every where

Clean MAF Sensor -CRC MAF Cleaner

Replace the 2 --front O2 Sensors, if over
100,000 miles on them The ones closest to motor

Use the OEM Type not the cut & splice
universal junk

NAPA can order them
Should be Bosch or NGK

Codes do not tell you anything about what is wrong
or what to replace.

Jun 11, 2011 | 1997 Ford Expedition

1 Answer

Window fell off track on a 1998 ford expedition how do i fix that


sounds like this could be a problem whithe the track or it came loose from the window regulator. very easy to tell what happend. take the door pannel off and just simply look inside. if it is the part that accualy monts to the window that is your regulator. if it looks like it was glued on to the window then you can go to any part store and pick up a tube of uerothane it comjes in a caulk tube apply this to the track on the regulator and put the window back in this will take about 24 hrs to fully cure. also do not close window all the way only about half way untill fully cured or at least 5 hours

Dec 30, 2009 | 1998 Ford Expedition

1 Answer

I have a fail code (P1409) on my 1998 FOrd Expedition, 4.6L. Where can I get this part? Thanks, Alec


Code indicates bad EGR Vacuum Solenoid. Chilton lists possible causes below. Here's a link to the part you want. Best of luck!
Greg

http://www.rockauto.com/catalog/raframecatalog.php?carcode=1304402&parttype=4964&a=FRc1304402k943582

Possible Causes:
  • EGR VR solenoid circuit is open, or shorted to ground
  • EGR VR circuit is shorted to power or the VPWR circuit is open
  • EGR vacuum regulator solenoid is damaged or the PCM has failed

May 19, 2009 | 1998 Ford Expedition

1 Answer

1998 saturn sl cam posiner sincer po341 a ckt rng/performe bnk1


Needs a New Front O2 Sensor.Saturn Also has a updated Re-flash For This DTC. Recommend an OEM sensor for this,lots of issues with aftermarket O2 sensors!!

May 03, 2009 | 1998 Saturn SL

1 Answer

Solution for 1998 saturn sl


Hello DTC P0341 & P0133 very common saturn Codes.You need to check condition of Plugs & wires,If not New Replace All Plugs & Wires,also I would replace the #1#4 Coil for the P0341.For the P0133 Reaplce your front O2 sensor with an OEM sensor,not an aftermarket.

May 03, 2009 | 1998 Saturn SL

1 Answer

1998 ford expedition


try buying a 24mm wrench and just put a litle bend in it and a long screw driver to give you the pry to get it loose

Feb 27, 2009 | 1998 Ford Expedition

1 Answer

I have problem whith my 1998 expedition the code PO354


if you are standing in front of the vehicle looking on the left side cyl #4 is the second one back from the front. Follow the wires to see where coil is. Or it may have coil on plug.

Feb 08, 2009 | 1998 Ford Expedition

Not finding what you are looking for?
1998 Ford Expedition Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...