Question about 2002 Jeep Liberty

1 Answer

Horn does not work 02 jeep liberty

I replaced the fuse, but the horn still does not work. Fuse is good, relay clicks when horn is pushed

Posted by on

  • 1 more comment 
  • darkeyes179
    darkeyes179 Jul 26, 2012

    I have the same problem ,I'm not sure what to do.

  • darkeyes179
    darkeyes179 Jul 26, 2012

    Tap what with a light hammer?im not that good with cars lol.

  • Anonymous Mar 23, 2014

    horn does not work when button is pushed

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 21,949 Answers

Get someone to hold hand on horn then tap it with a light hammer ,then when itts working give it a squirt of engine oil on the vibrating part so it runs behind it

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Code p0161 p0141 change the 02 sensor but still th light comes on.


Not likely both sensors fail same time look for a fuse or relay that has failed!

Reset codes and see if error returns if so and fuse is good check relay circuit.

Hope this helps?
26150637-emweptctsl5vxsoydbirzle5-2-0.jpg

Apr 03, 2016 | 2003 Jeep Liberty

1 Answer

Where is the fuse for horn and horn relay located on a 2005 jeep liberty


Fuse #3 is for the horn in the fuse panel inside the vehicle on the drivers side fuse panel assembly. The relay is under the hood in the relay panel assembly

26101808-toiv5xkexxwpce2vowlb4g53-4-0.gif

26101808-toiv5xkexxwpce2vowlb4g53-4-1.gif

Feb 20, 2016 | Jeep Cars & Trucks

1 Answer

Which fuse is for the horn jeep liberty 2006


the one marked horn
fuse #1 is the HORN fuse , in the schematic.
15amps.
this is covered in the glove box, operators guide, why not get one.
the car has 3 power panels
PDC
an JB1 and JB2 fues boxes.
its not in the PDC
Fuse 1 is in JB2
but he horn relay is in JB1

now you will ask me where are the boxes... sigh..
the operators guide covers that. and i dont do, that,
2006 is still online for free, 10 year range, why not get it while you still can?
here it is, get it read it and read the fuse pages.

http://www.jeep.com/en/owners/manuals/

easy peasy

Oct 01, 2014 | 2006 Jeep Liberty

1 Answer

The horn for my jeep liberty is not working where can i find the relay


this is covered in the operators guide, under fuses, and fsm
and at alldata.com.

dont you mean you want to find the cause?
both fuse #3 (horn)<<<<<<<<<<<
and the relay (horn)
are in the fuse box junction box, in the cab. did you look first?
1st google hit. btw.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=38252

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=3&t=38252&start=20


some cars are different, due to DRL , alarm , and other options
on the car. so having the correct documents for car is best.
alldata.com id bet gets it right.





Apr 05, 2014 | 2002 Jeep Liberty

2 Answers

Horn not working


With something like this it's most likely a fuse burnt out. There is a fuse box located under the hood as well as inside the Jeep. Usually the lid has a map describing which fuses do what. If not, there should also be a map in your owner's manual.
1.Find the fuse associated with the horn and check if the metal piece in the middle is broken.(like a light bulb)
2.If its broken, replace with a fuse with the same amp rating. (number on the side/color)
3. If it still doesnt work than the connectors to the horn or the horn itself need replaced. The horn is usually located behind the grille or front bumper. It kind of looks like a black plastic snail usually.

Mar 02, 2011 | 1995 Jeep Wrangler

1 Answer

I just bought a 2000 Saturn SL 4-dr sedan. It's in great shape, but the horn doesn't work and the dashboard light don't work. Is this a simple fix with replacing the fuses or dash light or is it a little...


Check fuse for horn and for dash lights. If the interior lights work then suspect dimmer switch for the dash lights. If you press the horn button do you hear a click under the hood or inside the car? If you do not then the fuse is blown and if the fuse is good then the relay may be suspected bad. If the fuse is good and the relay clicks then suspect the horn to be bad. If fuse is blown and you put a new one in and you push the horn and the fuse blows again, then disconnect the horn before replacing the fuse again. Then push the horn button and see if you hear the relay click if you hear a click the the horn is bad or wiring butmost likely the horn. If you have the horn unplugged and the fuse is good and you push thee horn button and no relay click suspect the horn button to be bad. Hope this helps.

Sep 06, 2010 | 2000 Saturn SL

2 Answers

Bought an 2004 honda accord and the horn does not work. What is the procedure for repairing this issue?


simple circuit, but can be hard if problem is switch in steering wheel. First check fuse and relay at fuse box. relay should click when horn button on wheel is pushed. If relay doesn't click, either button or relay is bad. If relay clicks, test for voltage at horn. You can use a simple test light available at the auto parts store if you don't have a voltmeter. If there is voltage at the horn, replace horn.
If relay does not click, replace relay to see if that fixes your problem. If new relay doesn't fix, you have a bad switch in the steering wheel or possibly bad wiring. cannot help you with switch as it's different on every car. any questions--let me know.

Sep 06, 2010 | 2004 Honda Accord

1 Answer

Horn , power windows and sunroof all stoped working on 2007 changed horn fuse and as soon as i used the horn the fuse blew again


This wold indicate that you have a shorted horn circuit. Generally, the horn circuit has a negative contact at the steering wheel, meaning when you push the button, it grounds (-) the sysem causing the relay out in the engine compartment area to provide 12V (+) directly to the horn. If nothing else causes the fuse to blow, the pwr window/sunroof., then either the relay itself is shorting out or a wire to the horn is grounding, or you have a bad horn. (spend a few fuses & save time, unplug the relay, replace the fuse & press the horn button & see if the fuse blows. Next, plug in the relay & do the same for the horn)

Generally it won't be the wire from the horn button or the horn would be working continually. Your owners manual should tell you where the relay is & you could see if you notice any unusual appearance to the case, as well as following the wiring from there to the horn, to see if any damage is apparent. IE: if the horn is located in the front grill area or near a opening in the fenderwell, does it appear a rock or something has hit it or any wiring causing damage. With a vehicle as new as yours, if it isn't obvious damage, I would suspect the relay. good luck

Jan 31, 2010 | 2007 Jeep Liberty Sport

2 Answers

2005 Jeep Liberty Horn wont shut off


wiggle the horn on the colum if it stops then the spring on the horn pad has gone bad

Aug 08, 2009 | 2005 Jeep Liberty

1 Answer

Horn no is working. The horn is weel but nothing happen push horn button.


If you hear a click the power is working the relay. If no click under dash, possibly bad fuse or relay. If you hear relay, test horn. Unplug horn and run a 12V jumper to see if it beeps. If it doesn't, try to redo the ground and then test. Then if that doesn't work, replace horn.

Sep 16, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...