Question about Hyundai Motor 1998 Accent

1 Answer

Accent check engine light on but no problem noticed...

I have a 1998 accent sport. I just changed the Crank sensor, and my check engine light got off. But about a week later, it came back but I don't really know why. I don't have a lot of money to check what might be the problem so I was hoping somebody could help.

And this morning , I put my left flasher on but after 3 seconds, it stop flashing, even though the flasher stick was still down. Could it have a link with everything.

And I heard that there were a lot of problems with the oxygen sensors, I was wondering if they are not working, what problems in the futur might I have?

Posted by on

  • 1 more comment 
  • stephasselin Feb 26, 2009

    How can I know the engine code? Not really good with cars .

  • mike loshbough
    mike loshbough May 11, 2010

    you can take it to auto zone they will check it for you

  • mike loshbough
    mike loshbough May 11, 2010

    what is the engine code?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Go to autozone and they check your car out for free/ tell them your check engine lite is on they will tell whats wrong

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can someone send me pictures of where the sensors are located in my 2001 hyundai accent, please.?????? it wont start.


Sensors may not help you. Define "wont start". cranks? wont crank? cranks but wont run? Check engine light on with key on?

Sep 22, 2011 | 2001 Hyundai Accent

1 Answer

CRANKS BUT WILL NOT START I CHANGED CRANK POSITION SENSOR IT RAN FINE FOR ONE DAY NOW IT WONT RUN AT ALL


Faulty crank position sensor i have seen this two times before.Do you have check engine light on if so re scan fault codes as well..

Dec 25, 2010 | 2002 Hyundai Accent

1 Answer

Faulty sensors in my hyundai accent.


Whenever the 'CHECK ENGINE' light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE and perhaps eventually fix the problem.

Oct 28, 2009 | 2001 Hyundai Accent

1 Answer

Window crank


I had the same problem. If you look at the outside of the door while cranking the window, look to see if the window is trying to go on the outside of the outer seal. If so, you will have to check to see if the window is loose on the tracks. On mine, the track frame had spread open. I repaired it and used graphite to lube the track.

Jun 06, 2009 | Hyundai Motor 1998 Accent

1 Answer

No pick up after 45 mph


it could be in a limp mode which would explain it not going over 45mph even though you replaced o2 sensor you may still have to take it to maindealer to reset brain memory.

Feb 22, 2009 | Hyundai Motor 1998 Accent

1 Answer

Would like to know how to change engine in 1998 hyundai accent?


yes you will have to take engine and transmission out together.you will have to also take the front wheel's off, separate the lower ball joint's so you can swing the assembly to one side so the axles will come out, pry the axles from the transmission with a pry bar or large screw driver,And the best part is disconnecting all the wires from the sensors .
have a nice day :-)

Feb 05, 2009 | Hyundai Motor 1998 Accent

2 Answers

99 hyundai accent starts sometimes. not battery


ok when the check engine light comes on that usually indicates a engine malfunction...what you can do is go to your local autozone and they can do an OBDII test for free..my bet says it is the cam or crank sensor.. DO NOT SHUT THE CAR OFF AT AUTOZONE..LOL

Jan 01, 2009 | 1999 Hyundai Accent

1 Answer

1998 hyundai accent


make sure crank sensor is all the way seated care taken 10mmnut dont over tighten or you will break sensor

Sep 23, 2008 | 1997 Hyundai Accent

Not finding what you are looking for?
Hyundai Motor 1998 Accent Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...