An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 10,000 points.
Re: Replace Rear Shock Air Compressor
I am not really sure but for the most part its under the hood just inside one of the fenders but i would like to give you this number they only sells GM- parts its Schram auto & truck parts # 1-800-292-1032
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check comp for power ;make sure its plugged in but if its not then, look to the rear of the car ,bumper look for a air fill line along the bumper or in the trunk if ther is one then the bi-passed the pump
Your Buick LeSabre may have air shocks on the rear. Check the shocks for leakage or stains from previous leaking. If the shocks are leaking you'll need to replace the set. Don't replace only one shock-replace them both.
yes, you can just order them without level ride, you could also install the same ones the only thing is the air part will not be used, but if the shock without air is cheaper then just use them, i think it may be hard to get without air as seeing they all have the air ride, again if a problem just use the stock shock without useing the air,you could install hoses to shock and put your own air in them, there would be a valve you install under the bumper or where ever you like, you would ask for a air shock hose kit, easy to install. hope this helps, heres a picture of kit
Take skirting down in trunk on the side you are working on. Remove center nut on shock 15MM. Then jack that side up or whole rear of car and place jack stand or jack under control arm. Now you can remove the two 10MM bolts that fasten the bottom of the shock to the control arm, most of the time the speed nuts brake but you can hold on to them with a pair of pliers. Once this is done remove the shock place all hardware on shock and install. The new shock will come with an 18MM center nut. Hope this helps.
Hello. A couple things may have happened.1, one of the rear air shocks could have blown out, or 2, you may have a air line leaking or broke. We are here to help you get your vehicle diag and repaired. Craig
it has hydraulic lift shocks on the rear not air if it the shock it is not really hard to change but you have to realign the vehicle when your done because this is mounted to the rear spindle with two bolts best to let a shop do it to where it is set right.