Question about 2005 Hyundai Accent

Open Question

High Beam Indicator Light Hyundai Accent 2005

Hi,
The high beam indicator/worning light is not working. I have taken out the dials and noticed the there are some bulbs which can be replaced e.g. direction indicators but not the high beam indicator. To fix this, do I have to replace the full dial unit?

Posted by on

6 Suggested Answers

  • 840 Answers

SOURCE: Adjusting the low beam headlight

its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much

Posted on Jan 31, 2009

jmgldsmth
  • 1869 Answers

SOURCE: one head light wont turn

replace the headlight bulbs both should be replaced as a unit

Posted on Apr 21, 2009

ftw1952
  • 10319 Answers

SOURCE: No low beam, high beam and parking lights work

Bad headlight switch that needs replacing

Posted on May 23, 2009

kevinj650
  • 82 Answers

SOURCE: high-low beams not working

Check for headlight relay and fuse. Some cars have separate circuits for head light flasher and normal high/low beam. From your description, I would suspect a bad connection to/from relay or relay itself.

Posted on Jul 07, 2009

ghost45
  • 1280 Answers

SOURCE: main beam not working on my hyundai accent coupe

Problem is either wiring or the bulbs... evident.

Posted on Nov 04, 2009

  • 1 Answer

SOURCE: high beam indicator light

MY HIGH BEAM LIGHT IN DASH DOES NOT WORK JEEP tJ

Posted on Jan 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 Toyota Camry . Low beams work, but no high beam.


I would guess the switch on the steering column
is worn out,thus no high beam feature

That switch & that part of the lighting system has to be tested

Best if you have wiring diagrams & electrical skills

As with almost all folks that come to any web site, I assume
everyone ends up at a repair shop,because no one says otherwise

May 10, 2014 | 1999 Toyota Camry

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

2 Answers

2005 Ford Focus ZX3 SES, the blue high beam indicator in the dash comes on with low beams, and goes off with high beams. The indicator is on at the wrong time! I have tried the following: The turn signal...


It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)

May 08, 2011 | 2005 Ford Focus

2 Answers

Which is the high beam which is the low beam on a 2003 Hyundai Tiburon?


The low beam is always on the outside, and the high beam is always closer to the grill...

Dec 04, 2009 | 2003 Hyundai Tiburon

2 Answers

My low beam lights sometimes stop working i still have high beam and daylight runing lights after a while they come on.2009 elantra dealer can't find problem.


when the low beams quit try switching from high to low and back and see if low beams stay on, if they do it may be the dimmer switch, if that doesn't change anything suspect the headlight switch.

Sep 02, 2009 | 2009 Hyundai Elantra

3 Answers

High-low beams not working


Check for headlight relay and fuse. Some cars have separate circuits for head light flasher and normal high/low beam. From your description, I would suspect a bad connection to/from relay or relay itself.

Jul 07, 2009 | 2006 Hyundai Accent

2 Answers

High beam headligts will not come on + no dash


Sounds like a bad switch to me. If it was a relay,it would not work period.Not to mention, the switch controls the dash lights too.

Jun 22, 2009 | Mazda MX-6 Cars & Trucks

1 Answer

High beam indicator light


MY HIGH BEAM LIGHT IN DASH DOES NOT WORK JEEP tJ

Apr 12, 2009 | 2003 Jeep Wrangler

1 Answer

Headlamps work on low beam, not on high. Indicator light not on.


U are going to have to replace the dimmer switch/combination switch.

Feb 09, 2009 | 2005 Ford F-150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...