Question about 1994 Hyundai Excel

1 Answer

Steering vibration while driving

I have a hyundai excel 4 door 1992 model and after a few wheel spins on a wet road, it started to feel a vibration on steering wheel while driving.any solutions?

Posted by on

  • Anonymous Mar 22, 2014

    The vibration can be felt through the entire car aswell as steering wheel and the noise is quite loud

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Check badly worn frt tire,bent wheel rim,loose wheel rim,frt tires may need te be rebalance

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tracking off when i drive


Hydroplaning is caused by the tyres not having the ability to get rid of water between the tyre and road, low tread depth, excessive speed in wet conditions, this will make the steering feel very vague. If your unsure of the steering, you need to take it for an alignment check. Get some decent tyres on the steering wheels at least.

Jan 03, 2014 | 1995 Cadillac DeVille

1 Answer

1992 GMC sierra two wheel drive 4.3l V6 Have a vibration or rubbing noise when I turn the steering wheel sharply to the left at parking lot speeds.


If you let go of steering wheel and step on brakes does the wheel vibrate?

I'd say its either warped rotors, power steering malfunction, or possible wheel bearing, although if wheel bearing you should feel/hear a hum which would get louder depending on which way you turn the vehicle.

Aug 23, 2013 | 1992 GMC Sierra

1 Answer

1995 gmc 2500 4x4 vibration


check the steering arm damper shocky as it may be failing and not providing the proper dampening effect to the steering. Check the wheel bearing adjustment and condition.

Jul 29, 2013 | 1992 GMC Sierra

2 Answers

My 1998 hyundai excel glx has a clicking sound front left wheel when turning


that would most likely be your drive axel when they go bad they click when you turn the steering wheel

Feb 04, 2013 | Cars & Trucks

1 Answer

2005 GMC ENVOY 4.2L VIBRATION PROBLEM AT IDLE AND START UP OR ANY TIME NO ACCELERATING


Hello! This is a known problem that is addressed by the following Technical Service Bulletin...Guru...saailer

Subject:Steering System Moan, Groan, Shudder and/or Vibration Type Noise During Low Speed Turning Maneuvers (Replace Steering Gear) #04-02-32-007A - (12/01/2004) Models:2004-2005 Buick Rainier
2003-2005 Chevrolet TrailBlazer, TrailBlazer EXT
2003-2005 GMC Envoy, Envoy XL
2004-2005 GMC Envoy XUV
2003-2004 Oldsmobile Bravada
Short Wheelbase Utilities Built Prior to VIN Breakpoint 52123375
Long Wheelbase Utilities Built Prior to VIN Breakpoint 56137280
This bulletin is being revised to remove the 2002 model year and add the long wheelbase utilities. Please discard Corporate Bulletin Number 04-02-32-007 (Section 02 -- Steering).

ConditionSome customers may comment on a moan, groan, shudder and/or vibration noise while making low speed turning maneuvers. Customers usually notice this condition in parking lot turning maneuvers.
Correction
  1. Diagnose the power steering concern. Refer to Symptoms - Power Steering System (SI Document ID #670351).
  2. Replace the steering gear with a newly designed steering gear. See the parts information below. Refer to Power Steering Gear Replacement (SI Document ID #742314).
Parts Information

Part Number

Description

Qty
88965356
Gear Kit, Steering
(Short Wheelbase Utilities)
1
88967181
Gear Kit, Steering
(Long Wheelbase Utilities)
1
Warranty InformationFor vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time
E9740
Gear Assembly, Power Steering - Replace
Use published labor operation time
E2000
Toe, Front - Adjust

May 03, 2012 | GMC Envoy XL Cars & Trucks

1 Answer

Vibration coming from front axle when coming to a stop it gets worse, brakes are good , maybe cv joint?


if you feel the pulsation in brake pedal when stopping. its a warped brake rotor thats causing it. for bad cv joint symtoms--- Unusual noises when making turns. As you are driving on the road and you make a turn at the corner, if you start hearing unusual sounds coming from under the car then this is one of the symptoms of a bad CV joint. These noises will sound like something is clicking beneath the car every time you turn the steering wheel. Evidence of a damaged boot. Steering wheel feels heavier. The steering wheel will start to feel tighter and heavier and you can hardly make simple turns to the left or right. In severe cases you might even feel heavy vibrations like you are driving down a rocky road.

May 02, 2012 | 2004 Jeep Grand Cherokee

1 Answer

While driving 1989 Hyundai Excel (carburator), the steering began to behave erratic. Steering wheel became harder to turn left/right the longer it was driven. * Checked brand new front tyres at closest...


Sound like you may need a new power steering pump or rack and pinion. Have you noticed any leaks from the vehicle? If you've had the vehicle for 21yrs, then I would have to go with the power steering pump is begining to fail. Hope this helps.

Mar 19, 2011 | 1989 Hyundai Excel Hatchback

2 Answers

Front drive noise when turning left/right


the C V JOINTS have hadit.that is the constant velocity jointsare badly worn and need replacing youdoit

Jul 27, 2009 | Hyundai Excel Cars & Trucks

3 Answers

I have front end vibration that is not caused by alignment. New tires on all four wheels but still have alot of front end vibration. Car is a 2004 Hyundai Tiburon.


just checked this out a while ago:



Wheel Hub Assemblies: Systems and Diagnosis of Worn Hub Assemblies & Bearings
Front wheel hub assemblies and bearings control the position of, and reduce the resistance of, vehicle wheels in contact with the pavement. When they fail, front wheels may not be kept in position and vibration and noise usually develop. Symptoms that normally develop as a result of these worn parts include:
  • A humming, rumbling or growling noise which increases with acceleration or as the vehicles turns
  • Vibration felt in the steering wheel, which changes with vehicle speed or as the vehicle turns
  • Looseness or excessive play in the steering wheel (especially while driving over rough road surfaces)
  • A loud, constant grinding noise when driving the vehicle (heard in the most severe cases of a wheel bearing failure)
  • Pulling to one side when braking.
  • Roughness - with the vehicle of the ground, roughness or vibration when rotating the wheel
  • Looseness - with the vehicle off the ground, looseness when wiggling the wheel back and forth (Looseness may also indicate a worn ball joint)
  • Excessive brake pedal play can also indicate sloppy or excessively loose wheel bearings
  • ABS failure in the system may be related to failure of the ABS sensor in the hub assembly or the internal sensor in the wheel bearing

Dec 22, 2008 | Hyundai Tiburon Cars & Trucks

Not finding what you are looking for?
1994 Hyundai Excel Logo

Related Topics:

336 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...