Question about 2005 Hyundai Tucson

1 Answer

Brake adjustment I would like to adjust the parking brake were is the adjuster on my 2005 tucson

Posted by on

  • Anonymous Mar 30, 2014

    brake master cylinder

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

There is only two real ways to tension your handbrake and one of them is just behind the acctual handbrake lever which is usually an ashtray or some kind of panel which will just remove and reveal a bolt with two secondary bolts comin out of other end. should only have to tighten the centre bolt though if the other two need tensioning you mite find there is excess on one side or the other. under the car also is a tensioning bar either side of the chasis.

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjusting the parking brake on a 2005 saturn reley


The first step ALWAYS to adjust the REAR BRAKE SHOES. The parking brake should not go "out of adjustment" UNLESS the rear brake shoes are:

1. Worn
2. Have recently been replaced and not set correctly
3. Are out of adjustment due to wear.

Turning the adjustment nut (unlike what Autozone seems to imply) is the LAST thing you should do AFTER all other possibilities have been eliminated.

Adjusting the rear brakes can often be accomplished easily in an empty parking lot. Simply accelerate in REVERSE to about 5~10 MPH and stomp on the brake pedal. Repeat this 3~5 times. You will often discover afterward that your forward braking performance has suddenly improved and that Parking brake is now miraculously "back in adjustment."

Feb 08, 2014 | 2005 Saturn Relay

2 Answers

Adjusting the parking brake on a MiTSubichi ENDEAVOUR 2005


If your parking brake is too loose or is not properly adjusted, you may encounter problems while parking, positioning and driving your car. Most of the time, car owners would send their car to a mechanic in order to fix and tighten the parking brake. However, you can actually skip this step and adjust your parking brake yourself. When your car starts to slip on a hill in its park position, you need to start tightening the parking brake.1 Remove the car's center console cover placed around your parking brake level inside your car. This is found between the seat of the driver and the front passenger.2 Use your wrench to turn its adjuster nut found at the end of your parking brake's cable rod. Loosen the adjuster nut with your wrench, while making sure that it does not come off at your parking brake cable rod's end.3 Raise your car rear wheels using your jack, and use your jack stands to support both its rear wheels.4 Pull up your parking brake handle up to two clicks or notches. Tighten your adjuster nut until you feel a slight resistance on your rear wheels whenever you spin them.5 Release your parking brake lever. Check and make sure that your rear wheels are still able to spin freely and without any resistance.6 Pull up on your parking brake lever up to three to five clicks or notches, while making sure that your car's rear wheels are not turning at all.7 Lower the car by adjusting your jack, and remove your jack stands from your car's rear wheels.

Oct 03, 2011 | 2005 Mitsubishi Endeavor

1 Answer

How do I loosen the hand brake adjuster to remove the brake calipers on a 2006 hyundai tucson


under the handbrake inside the vehicle unless its foot operated type then their is a adjuster under the vehicle drivers side level with teh seat

Aug 27, 2010 | 2005 Hyundai Tucson

1 Answer

How to adjust parking brake. do you need to take anything apart?


You cannot adjust the cables on a minivan manually. the tension is automaitcally adjusted by the self adjuster on the pedal release.

The park brake cables on this vehicle have an automatic self adjuster built into the park brake pedal mechanism. When the foot operated park brake pedal is in its released (upward most) position, a clock spring automatically adjusts the park brake cables. The park brake cables are adjusted (tensioned) just enough to remove all the slack from the cables. The automatic adjuster system will not over adjust the cables causing rear brake drag.

Due to the automatic adjust feature of the park brake pedal, adjustment of the parking brake cables on these vehicles relies on proper drum brake.

When the park brake pedal is applied the self adjuster is by-passed and the pedal operates normally to engage the park brakes.

When a service procedure needs to be performed on the park brake pedal or the park brake cables, the automatic self adjuster can be manually locked out by the service technician.

Aug 25, 2010 | 2004 Dodge Caravan

1 Answer

How do you adjust the parking brake on a 2005 buick lacrosse


Under the vehicle you will see a cable coming from both back brakes to a "t" in the middle of the vehicle. Tighten the cable till there is almost no slack by turning the nut on the bracket. Click the parking brake one or two clicks and then remove the slack until the cable is barely tight. Now your parking brake is adjusted properly.

May 20, 2010 | Cars & Trucks

1 Answer

I changed the shoes on the Parking brakes on my 2005 Escalade EXT, adjusted the shoe adjusters so the shoes "just" drake when the drums are re-installed, cleaned and re-lubed the mechanical cylinders,...


The first time you use the brakes on a drum the shoes will equalize with each other. This may be the reason it doesn't seem adjusted right. Readjust the shoe adjusters till you can just hear the scrape and try again.

Apr 28, 2010 | 2005 Cadillac Escalade

1 Answer

Hi, I have a 2005 tucson, i applied my handbreak yesterday in my driveway and now it won,t fully release. back wheel is making a noise when i go forward. my question is, do i have to replace it or can i...


YOU NEED TO ADJUST REAR PARKING BRAKE AT THE LEVER.FIRST OF ALL YOU NEED TO BLOCK FRONT WHEELS.THEN RAISE THE REAR OF THE VECHICLE.SUPPORT WITH JACK STANDS.MAKE SURE YOU ARE ON HARD LEVEL SOLID GROUND WHEN USING JACK STANDS.AFTER RAISING THE CAR SET PARKING BRAKE 1 CLICK TOWARD ENGAGEMENT.REMOVE FLOOR CONSOLE.TIGHTEN THE ADJUSTING NUT UNTIL THE PARKING BRAKES DRAG SLIGHTLY WHEN THE REAR WHEELS ARE TURNED.RELEASE THE PARKING BRAKE COMPLETELY.CHECK IG PARKING BRAKES DRAG WHEN REAR WHEELS ARE TURNED.READJUST IT NECESSARY UNTIL THERE IS NO BRAKE DRAG FROM THE PARKING BRAKES.

Apr 20, 2010 | 2005 Hyundai Tucson

1 Answer

How do I remove rear rotor from 2005 hyundai tucson


What you have to do is first remove the screws that hold the rotor on to the hub, let off the hand brake shoes(they are located inside the rotors) there is a rubber plug on the face of thr rotor, take that off and loosen the hand brake adjuster! remove the brake caliper and caliper carrier and the rotor should come off! hope this helps

Sep 05, 2009 | 2005 Hyundai Tucson

1 Answer

Adjust parking brake


in order to adjust the parking brake you need to remove the back wheels.slacken the cable at the centre console.on the rear disc there is a rubber grommet which you must remove.turn disc to half past.use a small light to look into the hole.turn slightly to the left till adjuster is visible and adjust to saticfaction.re adjust cable inside to four clicks.

Jul 15, 2009 | 2006 Hyundai Tucson

1 Answer

Park Brake Adjustment



Park Brake Adjustment (Disc Brake)

Tools Required

j 21177-A Drum-to-Brake Shoe Clearance Gage

Park Brake Shoe Adjustment

Caution: Refer to Brake Dust Caution.

Important: The park brake shoes must be adjusted before the park brake cable tension is adjusted.Set the J 21177-A so it contacts the inside diameter of the rotor
  1. Position the J 21177-A over the shoe and the lining at the widest point.
  2. Turn the adjuster nut until the lining just contacts the J 21177-A. Park brake shoe to brake rotor clearance: 0.6604 mm (0.026 in)
  3. Repeat steps 1-3 for the opposite side.
Park Brake Cable Tension Adjustment

Important: Before you adjust the park brake cable tension, verify that the park brake shoes are adjusted to provide a clearance of 0.6604 mm (0.026 in) and the rear disc brake rotors are installed.

  1. Verify the self adjuster lock-out pin has been removed.
  2. Fully apply and release the park brake pedal 3 times.

Feb 22, 2009 | 2007 GMC Sierra C/K2500

Not finding what you are looking for?
2005 Hyundai Tucson Logo

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...