Question about 1995 Mercedes-Benz E-Class

2 Answers

1995 benz oil press. prpblem

I have a 1995 Mercedes benz 220 petrol sedan and the engine oil pressure gauge started to act funny. ie gradually go down in pressure
, when the oil is cold press. is normal and when warm it gradually goes to zero. The oil light is not on so I suspect the oil press. is ok just a faulty gage. Where is the press sensor situated so I can check it and is there some way I can test the oil press.is ok
Steve

Posted by on

  • bbsteviebb Mar 01, 2009

    Thanks mattman for the info, really thought it must be the answer so i changed the filter and sadly it did not make any differance. So it must be the sender unit. Any idea where the press tramsmitter is situated,

    Cheers Steve

    Once again many thanks

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem., please give the solution

Posted on Mar 26, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 57 Answers

The filter might need to be replaced, there's a bypass valve that opens up when the filter is plugged to avoid starving the engine of oil. without the resistance of the filter, oil pressure is low. PLEASE RATE MY ANSWER.

Posted on Feb 26, 2009

  • Matthew Stauffer
    Matthew Stauffer Mar 02, 2009

    I don't no, sorry. good luck though!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What are the output specifications for the oil pressure transmitter (it's a 2-wire sensor)in a 2001 Bentley Arnage? (I need the mA outputs corresponding to various oil pressures, at say, 10psi, 20psi,


the oil pressure hot on your test gauge will be below recommended pressure necessary for the proper lubrication of the engine . The control module as you say will be set higher to notify you before that pressure is reached so that there is sufficient time to shut down the engine

Jan 17, 2015 | Bentley Cars & Trucks

1 Answer

I have a 1995 mercedes 220 oil in the cooling system gunky white. car runs excellent except for that.


Head gasket has failed replaced before something gets worse. Oil in coolant is not good for cooling and at some point water can get into oil and that will cause engine failure.

Sep 24, 2011 | 1995 Mercedes-Benz C-Class

2 Answers

How to repair oil leak for 1995 C200 Mercedes Benz? Looks like the leak is dripping down from underneath the engine onto the oil drip pan.


OIL LEAK COULD BE COMING FROM OIL FILTER SEAL. OIL LEAK FROM THE REAR OF ENGINE COULD BE REAR MAIN OIL SEAL.LEAK IN THE FRONT OF THE ENGINE COULD BE FRONT CRANKSHAFT TIMING COVER SEAL LEAKING OIL.

May 30, 2011 | 1995 Mercedes-Benz C-Class

1 Answer

Merc 3 220 petrol, engine turns but wont start. presume its a fuel pump issue, how do check?


Listen for the fuel pumps to come on when you turn the car to on (not start) if you hear them its a spark issue normally. Suggest checking/replacing coil packs, engine wiring harnesses for degradation because of biodegradable wiring insulation.

Mar 20, 2011 | 1995 Mercedes-Benz E-Class

2 Answers

Dealer said oil sensor on ml320 needs replaced. what does this do?


Your engine oil sensor is a pressure switch used to send oil pressure information to the dash, be it an idiot light or gauge. It is a critical part since your engine will seize up if there is low oil pressure. Replace the sensor or have it replaced. Have the engine tested with a handheld gauge. These are available at any auto supply store.

Mar 11, 2011 | Mercedes-Benz ML320 Cars & Trucks

1 Answer

How many liters of oil as the engine for MERCEDES BENZ C220 WDB203?


For 2002 Mercedes-Benz C 220 CDI WDB203, engine code 611.962, the engine oil capacity is 6,5 liters, with oil filter replacement.

Oct 19, 2010 | 2002 Mercedes-Benz C-Class

1 Answer

Engine starting problem


check to see if your trunk is locked to the far right. mine does not start when it is. 1996 c220

May 02, 2009 | 1996 Mercedes-Benz C-Class

2 Answers

1995 Mercedes Benz C220 will not start, and key ignition, and steering wheel is locked and won't turn.


hello,steering lock mechanism and your key need to replaced,if you want try to remove your under dash,steering lock mechanism have a small pin(around 5 mm) which pit to steering housing,drill out the lock,then try to turn steering wheel,ty

Apr 15, 2009 | 1996 Mercedes-Benz C-Class

1 Answer

Mercedes benz 1995 E220 press transmitter situated


Over by the oil filter housing should be a single wire to it.

Mar 01, 2009 | 1995 Mercedes-Benz E-Class

2 Answers

Mercedes 190e


in 190d ,engine 2.0.l diesel this thing is lokated near oil filter.

Aug 23, 2008 | 1990 Mercedes-Benz 190

Not finding what you are looking for?
1995 Mercedes-Benz E-Class Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...