a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This tip outlines the procedure to restore one touch control to the electric windows on your Acura following the disconnection of your car battery.<br />
If you have disconnected the battery for any reason on your Acura you will find that the one touch control feature on your electric windows no longer operates.<br /><br />You can resolve this by following this very simple procedure to reset the one touch control feature and get it operating again thereby saving you a trip to the dealer!<br /><br />1) Start the engine and then push down on the drivers window switch until the window is fully open.<br /><br />2) Pull up the drivers window switch until the window closes fully but keep holding the switch for at least 2 seconds after it closes.<br /><br />3) Auto function should now be restored. Lower and raise the window to check the one touch control.<br /><br />Hope this tip has helped. Please do leave a vote for it. Many thanks.
Chances are its a door switch or the wiring close to it. the wires bend every time you open and close the door. Check for that but if your dead set on a relay. look under the hood you should find a relay panel on the left(drivers side) finder well. On the cover of the panel box will be a listing and placement for all the relays
you re-initialise the system by moving the window upwards and hold the button for four seconds. Then move down the window and hold the button for another four seconds. Turn ignition off , wait two seconds. Now the auto function should be operable.
Principles of Operation
Power Window Control
The one-touch down (OTD) power window function allows the driver door window glass to completely lower with one button press. The driver window control switch is hardwired to the generic electronic module (GEM) and door window regulator and motor. When the GEM senses a one-touch down request from the driver window control switch, the GEM supplies a ground to the OTD Relay coil. The OTD relay then provides power to the driver window regulator motor, lowering the window. The OTD feature will function when the ignition switch is in the RUN or ACC position. The OTD feature also operates while the ignition is OFF and the accessory delay time-out period has not expired
Put the window down all the way and then hold the switch up, hold it until the window closes all the way up, and continue to hold it for about 10 sec. after the window is closed. Try this a few times, but if this does not work you will will probably have to take it to the dealer. They will have to do this for you with the Volvo computer scanner, this is covered under warranty if you are still with in by millage if not they will charge around 50 dollars.