Question about 1988 Mazda B2200

1 Answer

1992 B2200 Mazda timing instructions

Belt broke and I would like to retime the crank with the OHV pulley, How is this done. Thanks RC

Posted by on

  • Anonymous Apr 11, 2009

    I just rebuilt my truck and didnt mark the cam pully and cant put it on its some numbers on it but i dont know witch one is the right one

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 mazda b2200 gets spark from the coil but not the distributor


Remove the distributor cap, crank the engine is the distributor rotor turning? Then check the timing belt.

Oct 29, 2012 | 1988 Mazda B2200

2 Answers

1992 mazda mpv, 6 cyls. it occurs a year ago after tune up. its luck power. during smog test, and now it cranks but wont go through when it start. changed the rotor, spurk plugs and cable


Check your gas for possible water. Just in case try a can of SEAFOAM in your gas. It will take about 10 min of running to work. Also recheck the gap on the spark plugs it should be .044 gap. One other thing to check is the firing order and make sure the wires were put back in the right place to the right spark plug

Jan 10, 2011 | 1992 Mazda MPV

1 Answer

Timing belt tension pulley broke cannot get retimed need timing marks


the crank has a mark at 12 o clock, each cam has a mark at 12 o clock. line them all up and put the belt on. be sure to properly tension the belt. be sure to replace the idler pulley, and the water pump. hope there are no bent valves.

Dec 17, 2010 | 2001 Kia Sportage

1 Answer

Timing mark on crank pulley jumps abruptly about


Try plugging the vacuum advance hose itself to test the timing. Is the white Mark located where it should be? The Yellow is your advanced timing mark and should be also also be aligned with the pointer.

Dec 29, 2009 | 1988 Mazda B2200

1 Answer

Timing instructions


the timming should be set @ 6BTC you will need a timming light to check it.
You should go buy a manual from your local automotive store befor changing your timming belt
the site below will show you how to make sure you timming marks are right but it will not explain the removel or installation
http://www.mazdatruckin.com/B2200//B2200_Timing_Belt.html

Feb 25, 2009 | 1988 Mazda B2200

1 Answer

.005 clearance between crankshaft and timing belt sprocket.


mazdas specs for the crank are .985 but alot of cranks are made with a tolerence of .005 so from the factory alot of cranks are .005 to big are alittle smaller but both are right alittle play wont hurt it

Dec 13, 2008 | 1988 Mazda B2200

2 Answers

1991 mazda b2200- timing belt changed


The keyway and or the dot on the crank should be line at 12 oclock. You will see a point on the oil pump housing to go by. On the camshaft the pointer will be at 12 oclock also. Use the O on the camshaft to the top at mark. Be sure to look at the dist. roter to make sure that it is pointing at the #1 spark plug wire. I could get 180 out of time. If you do it right it should start up right away. then you can use a timing light to finish it.
Good Luck jerry1938@hotmail.com

Nov 09, 2008 | 1988 Mazda B2200

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

501 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...