An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: 2006 Ford Explorer XLT the Blower Fan only works on ...
Look under the dash on passenger side and just to the left of the blower motor housing you will see the 4WD control module.Remove the 2 screws holding the module and let it hang down and your resistors are behind this.Remove the 2 screws holding the resistors and remove.
Now I am assuming you have manual climate control and not electonic.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Geronimo, Normally the fuel lines run from gas tank, along frame rail, then up to fuel rail into injectors.
Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." 2006 ford explorer xlt fuel line routing Google Search
Check to see if the blower works with the heater on. Turn the control to heat and see if the fan works. First check the fuse for the blower. If the fuse is good and the blower does not work with heat on , the blower may be bad or the speed resistor maybe bad.
if you have manual control climate control then the system has a blower motor resistor . if you have automatic climate control then the system has a blower motor speed control. in eather case the part is under the dash in the heater box. depending on the system you have, buy the part and then look under the dash for like part, you will half to remove the under dash panels to be able to see. the part will be on the heater box somewhare.
if ur blower only came on the high fan speed i say it was ur blower resistor , but ur blower aint working at all so i would replace the blowerand the resistor cause they eventualy good out with when then the blower problems