Question about 1997 Honda Accord

1 Answer

97 honda accord want start

Vehicle are not fire properly have change distrible and plugs still want start. just turn over

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the timing belt settings. Bring it to top dead center and verify that that all the marks are where they are supposed to be. Had that same problem 5 years ago and it was that the belt had jumped 1 tooth due to stretching. Hope this helps.

Posted on Feb 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tbc dash light meaning for honda


Hello,
I don't know of a TBC light for Honda but there is a TDC... If that's what you meant to type. Its the "Top Dead Center" sensor

The TDC (top dead center) positioning sensor is another name for your crankshaft position sensor. This sensor measures the position of your crankshaft and helps with the proper firing of your spark plugs when you start your engine. The TDC sensor on the '97 Honda Accord is located on the underside of the engine block. Replacement TDC sensors can be purchased at your Honda dealership. This is not a difficult repair and can be done in about 15 minutes.

Read more : http://www.ehow.com/how_7918547_replace-sensor-1997-honda-accord.html

I hope that helps.... Have a great weekend

Sep 27, 2015 | 1994 Honda Prelude

1 Answer

97 honda accord changed timing belt and crank case sensors replaced them now car turnes over fires gets gas but wont crank


check to make sure that the crankshft and cam gears were lined up correctly with # 1 cyl at top dead center.

Jul 08, 2012 | 1997 Honda Accord

1 Answer

I own a 97 honda accord ti turn on and runs good


Happens when it is hot, runs fine after cooling off? I had a 91 that did that. It was the ignitor, which fires the spark plug and the fuel injector for each cylinder. Very mysterious and hard to diagnose. It can only be determined while it is NOT working and the tech has instruments to check it.

Jul 08, 2010 | 1997 Honda Accord

1 Answer

I mixed up the firing order on my spark pkug wires when i removed


I can post an awesome diagram but I need to know your engine size...

2.2L
2.7L
VTEC

May 26, 2010 | 1997 Honda Accord

1 Answer

How to change sparkplugs and wires on 91 accord


Standard Rule Change One Plug at Time, One Wire at a Time!

For your 1991 Honda Accord with a 2.2L SOHC L(Linear)4:
Firing Order:
1-3-4-2

Cylinders:
(back of vehicle)
4----3----2-----1
(front of vehicle)

Distributor:
(back of vehicle)
......4
3...........2
......1
(front of vehcile)

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!


Feb 23, 2010 | 1991 Honda Accord

1 Answer

97 honda accord wont start clicking noises


clean your battery terminals parobally have corrision on them

Sep 27, 2009 | 1997 Honda Accord

1 Answer

I would like tyo change the starte in my honda accord 2004 2.4 l


DISCONNECT BATTERY FIRST !!!!!!! THE START MAY NEED TO BE GAINED FROM UNDERSIDE OF VEHICLE,, RAISE VEHICLE AND SUPPORT ON AXLE STANDS !! UNDO WIRING FIRST THEN UNDO BOLTS/BRACKET..

Nov 13, 2008 | 2004 Honda Accord

2 Answers

97 Accord P


I had that same code with my 96 accord and it turned out that the Vehicle Speed Sensor was bad. replaced it and it runs like new.

Jul 29, 2008 | 2006 Honda Accord

Not finding what you are looking for?
1997 Honda Accord Logo

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...