Question about 1996 Chevrolet Cavalier

1 Answer

96 chevy cavalier water pump empellar

Is it possible to get a new water pump with reversed empellars?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,000 Answers

Cnbarr, Although it is possible, it is not probable. Of course NEW only means "Nerver Even Worked". That being said, you might want to go to your local parts house and take a look at another water pump and see if the impeller is facing or looks the same. If it is, yours is probably OK.
Let me know what you find and we can go from there.
Regards,

Posted on Feb 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace water pump on toyota hilux 2.8 diesel


its a matter of removing components out of the way until you can get all the pump bolts out. clean the block surface before you install the new pump. Reverse procedure to reassemble the engine.

Jan 06, 2015 | Toyota Cars & Trucks

2 Answers

2002 pontiac aztect overheating has new thermostat and water pump


Try removing the thermostat and reverse flushing the motor, Actually try flushing in both directions, this will tell you if you have a circulation problem but 1 thing you should know is that the water goes in the water pump and out the thermostat, try running it without the thermostat and check your water flow

Jan 13, 2014 | 2002 Pontiac Aztek

1 Answer

Just replaced empellar but still can't get water to pump & keep motor cool


Are you talking about a boat motor??????? If so without knowing what kind of motor (Merc-Johnson- Martin??) you may have had mud wasps make their homes in the system over the time it sets in the spring. Or you didn't install the water pump properly. You did replace the pump?

Feb 16, 2013 | Cars & Trucks

4 Answers

How to replace water pump on a 1985 90 hp mariner outboard motor


mcdevito75 Here, If I;m not mistaken the water pump is in the lower houseing, a big job, let the marina take care of it as the water pump should be Changed only if it doesn"t pump at all.

Jun 16, 2010 | 2004 Mercury Mariner

1 Answer

Change water pump on 1999 Century Buick


GM Century/Lumina/Grand Prix/Intrigue 1997-2000 Water Pump - REMOVAL & INSTALLATION

3.1L and 3.4L (VIN E) Engines
  1. Disconnect the negative battery cable.

  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Please see .
  6. Remove the water pump pulley bolts and remove the pulley.
  7. Remove the water pump bolts and separate the pump from the engine front cover.

To install:

1430070.jpg

Fig. Exploded view of the water pump and front cover arrangement-3.1L and 3.4L (VIN E) engines
  1. Clean all parts well. Use care when scraping gasket material from the front cover and the pump. Do not gouge aluminum parts. Clean the bolt threads well. The torque specification is low and if the bolt threads are dirty, an accurate torque is not possible and leaks are likely to develop.
  2. Using a new gasket, install the water pump to the front cover. Install the cleaned and lightly lubricated water pump bolts. Torque to 89 inch lbs. (10 Nm).
  3. Install the water pump pulley and bolts and torque to 18 ft. lbs. (25 Nm).
  4. Install the remaining components in the reverse order of the removal process. When refilling the cooling system, use the proper mix of DEX-COOL® and water. Check for leaks.

3.4L (VIN X) Engine
  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the coolant recovery reservoir.
  4. Remove the drive belt. Please see .
  5. Remove the pulley bolts and separate the pulley from the water pump.
  6. Remove the water pump bolts and remove the pump from the engine.

91d51fb.jpg

Fig. Exploded view of the water pump mounting-3.4L (VIN X) engine
To install:
  1. Clean all parts well. Use care when scraping gasket material from the front cover and the pump. Do not gouge aluminum parts. Clean the bolt threads well. The torque specification is low and if the bolt threads are dirty, an accurate torque is not possible and leaks are likely to develop.
  2. Using a new gasket, install the water pump to the front cover. Install the cleaned and lightly lubricated water pump bolts. Torque to 89 inch lbs. (10 Nm).
  3. Install the water pump pulley and bolts and finger-tighten the bolts.
  4. Install the drive belt, then torque the pulley bolts to 18 ft. lbs. (25 Nm).
  5. Install the remaining components in the reverse order of the removal process. When refilling the cooling system, use the proper mix of DEX-COOL® and water. Check for leaks.

Hope this help (remember comment and rated this).

Apr 04, 2010 | 1998 Buick Century

1 Answer

1998 Buick LeSabre Limited water pump replacement ?


. Remove accessory electrical junction block,
and position aside. Loosen water pump pulley bolts.
Remove drive belt. Remove water pump pulley
bolts and pulley.
. Remove water pump bolts, water
pump and gasket. To install, reverse removal proced
ure using NEW gasket. Fill and bleed cooling
system.

Mar 28, 2010 | 1998 Buick LeSabre

2 Answers

How do you remove the water pump from a 2006 dodge grand caravan 3.3 v6


drain coolant loosen water pump pulley bolts, take off serpentine belt, finish removing pulley, unbolt water pump (5 bolts) and remove scrap off old gasket silicone new gasket to new water pump and reverse steps for installation

Oct 22, 2009 | 1996 Dodge Caravan

2 Answers

Water Leak around fan belt


Water Pump! Why In the world Did you get one of those?? 4 real.. f youve ever been to Korea ( I have for 6 years) Ud know better.. Im sorry.. Its the water pump.. Its the head gasket.. Its everything you can imagine.. Get rid of it.. Ive answered so many ******* stupid questions on here and only MAde 6 bucks.. Im sick of it.. so take this free advice.. Thanks

Mar 25, 2009 | Daewoo Lanos Cars & Trucks

1 Answer

How to install new water pump on 1989 mercedes 300e


Drain the coolant
Remove air cleaner assembly
Disconnect water hoses from radiator
Remove drive belt
Remove power steering pump
Remove water pump drive pulley
Loosten hose clamps on cylinder head tp water pump cooling line
Remove water pump mounting bolts and water pump

Just reverse these procedures to install new pump.



Mar 19, 2009 | 1989 Mercedes-Benz 300-Class

Not finding what you are looking for?
1996 Chevrolet Cavalier Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...