Question about 2000 Dodge Stratus

1 Answer

Won't fire I put on a new cam sensor and crank sensor and it still won't fire. This is a 4 cylinder.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Does it have spark, does it have fuel, check the timing belt

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P 0016 code


Code 16 is for a problem where the correlation between the crank sensor and the cam sensor for bank one is off. So yes it could be the cam sensor or the timing belt. If compression is normal on all 6 cylinders I would expect to find a bad sensor.

Jan 22, 2014 | Chrysler 300M Cars & Trucks

1 Answer

1997 Oldsmobile Achieva won't spark


id start by checking wires from crank sensor to pcm, using ohm meter, for resistance, or for open. at crank sensor connector, with it unplugged, probe each spade, one at time, with one lead and touch the other lead to good ground location. if you get a reading, you have a short to ground. if this is the case, i find it easier to run new wires from pcm to the sensor, vs tracking problem to its source. if you find no problem w the crank circuit, id first check wiring to coil housing, if it checks ok, try another coil tower, as i have got bad new parts in this same situation, on a quad 4. hope this helps. james white, white automotive, hopkins mo.

Feb 04, 2013 | 1997 Oldsmobile Achieva

2 Answers

2001 yukon shut off while driving won't start


it sounds like your alternator is going out

Jan 14, 2013 | GMC Yukon XL Cars & Trucks

1 Answer

96 blazer.4.3 ltr 4x4.new crank sensor.new fuel filter.new coil.got fuel and spark.still won't start


How about the fuel pump...are you getting the fuel to the cylinders? Is the fuel making it through the fuel line through the fuel filter? Drop a few drops in 1 cylinder, if it fires, you have a fuel problem. Does it turn over? If not check out the motor starter!

Dec 31, 2012 | 1996 Chevrolet Blazer

1 Answer

2000 sable won't start. Battery good, gets fuel, tries to start, but won't fire.


Does the vehicle gets spark? if yes check with scanner whether is there any problem with crank or cam sensor failure.

Sep 16, 2012 | 2000 Mercury Sable

1 Answer

Have 87 jeep comanche, have been told it has a cam shaft sensor, to keep it in time , if so where is it located? the engine is a 4.0


The cam sensor is located in the distributor.check the cylinder compression, check for ignition spark, check for fuel injector pulse and fuel pressure.

Aug 06, 2012 | 1987 Jeep Comanche

1 Answer

Replaced coolant temp sensor, would not fire before replacement. sat overnight an won,t fire off cranks fine just no start has had new timing belt, new starter, new batt., new coils an wires, new plugs


to many things have been done=wasting money.test the spark by remouving the plug wire put a1/4" bolt in the end of the wire hold it with an insulated pliers near the engine metal and have someone turn the keyas though starting.if you have a good stoung cracking spark ok.irf not the computer may not be activaitng the coils.+cam crank sensor no good. the cam sensor has been a big problem.probably find further info at the library.or have it towed to a sop.there are a lot of more complicated issues involved with a no start that need to be tested before throwing more parts at it.

Feb 14, 2010 | 1994 Subaru Legacy Outdoor

Not finding what you are looking for?
2000 Dodge Stratus Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...