Question about 2001 Jeep Cherokee

1 Answer

Front-end noise When making an excellerated left turn, you get a loud noise that sounds like the wheel isn't on tight (but is), or a bad c/v joint ( but no c/v joint exists on this vehicle because it is 2WD). You do not even have to turn the wheel much for the sound to be apparent and there are no visible signs of the wheel or tire rubbing against anything in the wheel well.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 204 Answers

If the noise is coming from the right front when making a left turn it would be a wheel bearing if you can narrow down where the sound is coming from i would check that.

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Loud popping noise in passenger side front suspension when turning left. 2011 Dodge Challenger R/T


A loud 'cracking' or rumbling noise suggests that a wheel bearing needs replacing. On front wheel drive cars a worn driveshaft universal joint can cause the same noise

Apr 15, 2016 | 2011 Dodge Challenger RT

1 Answer

Loud thumping inback end when i hit a bump and ginding on turns in the front end


check the u joints in the drive shaft or the rear end needs greased,or it could be going out.have you changed both the inner bearings as well on the front end?

Aug 10, 2012 | 2003 Buick Rendezvous

2 Answers

1999 ford explorer limited whining noise in front end


Whining noise is probably in one of the pulleys or belts. Probably the power steering. And the popping is probably CV axles.

Aug 02, 2012 | 1999 Ford Explorer

1 Answer

All wheel drive binding when turning sharp on my 2002 Volvo


SOUND LIKE A WORN HALF SHAFT CV JOINT.CHECK FRONT DRIVE AXLES LOOK FOR BUSTED DAMAGED BOOTS.IF BOOTS ARE DAMAGED YOU HAVE TO REPLACE THEM. YOU CAN RE OVER HAUL CV JOINT AND BOOTS BUT IT WILL BE CHEAPER TO BUY NEW ONE YOU NEED TOOLS TO REBUILD CV BOOTS AND AXLE.

Nov 03, 2011 | 2002 Volvo S60

1 Answer

Does a 2002 taurus have wheel barrings


Possibilities are:
  1. Bad wheel bearing
  2. Bad tie rod
  3. Bad ball joint
  4. Bad strut
  5. Loose lug nuts
Most cases it's a wheel bearing but since you're getting a loud noise too, it could very well be a bad ball joint or tie rod end.

Oct 18, 2011 | 2002 Ford Taurus

2 Answers

My front end is making very loud noises every time


same thing thats wrong wth mine ur bushings r bad. replace ur upper and lower ball joint and dont no proper name 4 it but outer tie rod goes to bushing on wheel change it.thats what im trying to figure out how to change.good luck

Jan 07, 2010 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

My car makes a loud rumbling noise when i accelerate and gets louder as i go faster, if i turn my wheel slightly to the left all the noise and vibration stops and it sounds normal again


I believe the bearings in the front wheel are about to come to the end.
Have it checked in a garage.... NOW! otherwise you will be driving on 3 wheels... sooon.
Iceman.

Nov 10, 2009 | 1999 Dodge Stratus

1 Answer

I am not sure if the wheel bearing on the front end is broke. it makes a loud poping noise when turning and the wheel is towed in


Loud popping/grinding most noticeably heard when turning is normally a sign of a bad CV joint. Look under the van where the axle half-shafts come out of the transaxle and connect to the backside of the wheel assembly. Are the rubber boots on the axles torn or missing?
If you hear the popping only in left turns, your right CV joint is bad, If you hear the popping only in right turns, your left CV joint is bad.

Nov 10, 2009 | 1999 Ford Windstar

1 Answer

Front-end noise on a 2001 Jeep Cherokee Sport


HI!! have somebody to help you star the car you outside put on drive turnthe whell to the side makes noisevery slow drive the truck and hear the noise if growglin noiise is detected is the hub bearing

Feb 25, 2009 | 2001 Jeep Cherokee

2 Answers

1991 Oldsmobile 88 Royale loud clunk when turning??


Ball joint, tie rod end or upper strut bearing. CV joints? Pulling to the left may be an alignment problem with front or rear tires. Get a four wheel alignment.

Oct 23, 2008 | 1991 Oldsmobile 88

Not finding what you are looking for?
2001 Jeep Cherokee Logo

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...