Question about 2006 Chevrolet Impala

1 Answer

Time does not display while radio is playing

Had water pump replaced, since repair, time does not display while radio is playing

Posted by on

  • conneelyt Feb 26, 2009

    no disp button on radio

  • conneelyt Feb 26, 2009

    radio/CD was factory fitted

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

If you look at the buttons on the front of your stereo you will find an button marked disp and this will be the selection button which will swap between information and time.

Posted on Feb 25, 2009

  • scott rimmer
    scott rimmer Feb 26, 2009

    i am really sorry but could you give a few more details about the stereo, is it factory fitted or did you have it fitted seperatley? if so have you a make and model?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a 2002 mitsubishi galant water leak


Depends upon the source of the water leak. Common places to leak are at hose connections, the radiator core, the heater core, or the water pump. Once you have identified the source of the leak, repair or replace parts as needed. If you have a 6-clyinder model, the water pump is located behind the timing cover, driven by the timing belt. Many owners believe that the repair shop is trying to rip them off when thy recommend water pump replacement at timing belt replacement time and opt not to do it since the pump is working. Unfortunately, the new timing belt will cause a different wear pattern on the pump shaft and almost unfailingly, the pump will leak within a few weeks or months after the timing belt is done. Many shop now refuse to replace the timing belt without water pump replacement for this reason, or will make the owner sign a waiver of responsibility if they refuse the additional service/cost.

Aug 22, 2014 | 2002 Mitsubishi Galant

1 Answer

Water Pump leaks from the front end of the Wagon.


follow this steps and fix it. God bless you
  1. Determine the Reason for Water Pump Failure
    • 1 Repair a water pump by checking your car for a failure in the bearings. You can test for bearing failure by seeing if there is any play in the shaft that is connected to the electrical fan blades, as well as the drive pulley to the pump itself.
    • 2 If you notice any free play in the shaft or the pulley, you will need to take the pump apart and replace the bearings.


    • 3 Determine if the water pump failure is due to a leak in the casing. Examine the water pump housing for leaking or water stains in the drainage hole next to the pulley.
    • 4 If water is dripping from this hole, then the seals inside the pump need to replaced in order to repair the pump.
    Remove the Water Pump for Repair
    • 5 Allow the engine to cool completely before removing any part of the cooling system. Never open a radiator cap or plug while the engine is still warm.
    • 6 Disconnect the car battery. This will prevent the electrical fan from turning on while you are under the hood.
    • 7 Drain the radiator of all fluid and disconnect the radiator hoses. Collect the fluid with a plastic container and keep it in a safe place until you are ready to put it back into the radiator.
    • 8 Remove the fan assembly. This will include the shroud, the fan and the fan belt. Disconnect the electrical leads for the fan.
    • 9 Remove the pulley for the fan belt as well in order to have access to the water pump.
    • 10 Use a socket set to remove the water pump from its engine mount.
    • 11 Open the housing for the water pump and replace the seals or bearing as necessary. Some auto parts stores carry repair kits that have both the seals and bearings for specific types of water pumps.
    • 12 Reassemble the cooling system by replacing the water pump, pulley, fan belt, fan assembly and radiator hoses. Refill the radiator with the fluid.
    • 13 Start the engine to see if the water pump repair was successful. Check for leaks before you take the car out on the road.

Oct 18, 2012 | Cars & Trucks

1 Answer

How to insert the code for the radio of my golf3 /1996



ENTERING SECURITY CODE

Most vehicles are equipped with Heidelberg V or VI radios that are equipped with a theft protection program. When the battery has been is disconnected or if the radio has been removed, the radio will lock-up electronically and cannot be operated until the security code is entered. On the Heidelberg V, if the proper code is not entered in six attempts, the radio will lock-up permanently and cannot be repaired. On the Heidelberg VI, two incorrect attempts will lock the radio for about 1 hour.
The Heidelberg V may have a code assigned at the factory or a personal code created by the owner. The Hiedelberg VI has a code assigned at the factory and entered by the dealer during pre-delivery inspection. New radios come with the code printed on a sticker but not entered into memory. All codes are 4 digits. To code the radio:
Heidelberg V

  1. Turn the radio ON . The radio should display the word SAF. DO NOT attempt to eject a cassette with the radio in this mode.
  2. Push the AM/FM and SCAN buttons at the same time and hold them until the display changes, then release them immediately. The number 1000 will appear for about 3 seconds, then the display will go blank. Release the buttons then.


NOTE If the buttons are held too long, the radio will interpret this as an attempt to enter an incorrect code.
  1. Use the first four station selector buttons to enter the code. The first digit of the code is always 1. Each time the other buttons are pushed, the number in that position will change.
  2. When the code appears correctly in the display, push the AM/FM and SCAN buttons at the same time. When the radio plays and displays a frequency, release the buttons.
  3. If the code was entered incorrectly three times, momentarily disconnect the battery and try again. If the code is entered incorrectly three more times, the radio cannot be coded and cannot be repaired.

Heidelberg VI
  1. Turn the radio ON . The radio should display the word SAF. DO NOT attempt to eject a cassette with the radio in this mode.
  2. Push the AM/FM and SCAN buttons at the same time and hold them until the display changes, then release them immediately. The number 1000 will appear and remain in the display.


NOTE If the buttons are held too long, the radio will interpret this as an attempt to enter an incorrect code.
  1. Use the first four station selector buttons to enter the code. Each time a button is pushed, the number in that position will change.
  2. When the code appears correctly in the display, push the AM/FM and SCAN buttons at the same time. When SAF appears in the display, release the buttons. The radio should play and display a frequency.
  3. If the code was entered incorrectly two times, leave the radio ON for one hour and try again. This can be repeated as often as required.

Oct 15, 2012 | 1996 Volkswagen Golf

1 Answer

2003 monte carlo, radio plays, but none of the buttons work, no display


All you can do is remove the radio and have it repaired by a local approved GM radio repair shop.

Jul 11, 2017 | 2003 Chevrolet Monte Carlo

2 Answers

Since I purchased my 2009 dodge journey I have had an issue with my radio/cd player ... sporadically the volume goes out, if I turn it off, and on it comes right back on, but will only stay on for 20...


AUDIO Any diagnosis of the Audio system should begin with the use of the scan tool. For information on the use of the scan tool, refer to the appropriate Diagnostic Service information.
For complete circuit diagrams, refer to the appropriate wiring information.

AUDIO SYSTEM DIAGNOSIS

CONDITION

POSSIBLE CAUSES

CORRECTION

NO AUDIO AT ALL SPEAKERS - RADIO DISPLAY AND CONTROLS ARE OPERATIONAL 1. Amplifier fuse faulty, if equipped. 1. Check and replace fuses, if required. 2. Wiring to amplifier faulty, if equipped. 2. Verify radio on/off input to amplifier and verify battery and ground connections. Repair wiring as necessary. 3. Radio faulty. 3. Refer to appropriate Diagnostic Service Manual. 4. Amplifier faulty, if equipped. 4. Replace amplifier. NO AUDIO AT SOME SPEAKERS - RADIO DISPLAY AND CONTROLS ARE OPERATIONAL 1. Wiring faulty between amplifier and speaker. 1. Repair wiring as necessary. 2. Wiring faulty between radio and amplifier. 2. Refer to speaker diagnostics. Repair wiring as necessary. 3. Wiring faulty between radio and speaker. 3. Check wiring for open or short, repair wiring as necessary. 4. Speaker(s) faulty. 4. Refer to speaker diagnostics. 5. Amplifier faulty.
5. Replace amplifier. 6. Radio faulty. 6. Refer to appropriate Diagnostic Service Manual. POOR AUDIO AT ALL SPEAKERS - RADIO DISPLAY AND CONTROLS ARE OPERATIONAL 1. Power/ground wiring to amplifier open or shorted. 1. Repair wiring as necessary. 2. Power/ground wiring open or shorted. 2. Repair wiring as necessary. 3. Amplifier faulty. 3. Replace amplifier. 4. Radio faulty. 4. Refer to appropriate Diagnostic Service Manual. POOR AUDIO AT SOME SPEAKERS - RADIO DISPLAY AND CONTROLS ARE OPERATIONAL 1. Wiring faulty between amplifier and speaker. 1. Repair wiring as necessary. 2. Wiring faulty between radio and amplifier. 2. Refer to speaker diagnostics. Repair wiring as necessary. 3. Wiring faulty between radio and speaker. 3. Check wiring for open or short, repair wiring as necessary. 4. Speakers faulty. 4. Refer to speaker diagnostics. 5. Amplifier faulty. 5. Replace amplifier. 6. Radio faulty. 6. Refer to appropriate Diagnostic Service Manual. SOUND DISTORTION (VIBRATION FROM SPEAKER AREA, BUZZING - HUMMING) 1. Door trim panel loose or missing fasteners. 1. Inspect door trim panel and correct as necessary. Replace any missing fasteners. 2. Water shield loose or misaligned. 2. Inspect water shield and adjust as required. 3. Items placed in door trim panel map pockets vibrating or moving from side to side. 3. Remove items from door trim panel. Ensure that vibration is no longer present. NO RADIO DISPLAY - AUDIO AND CONTROLS ARE OPERATIONAL 1. Radio faulty. 1. Refer to appropriate Diagnostic Service Manual. NO RADIO DISPLAY - AUDIO AND CONTROLS ARE NOT OPERATIONAL 1. Fuse faulty. 1. Check radio fuse and Ignition-Off Draw (IOD) fuse in Junction Block (JB). Replace fuses, if required. 2. Radio connector faulty. 2. Check for loose or corroded radio connector. Repair, if required. POOR RADIO RECEPTION WITH KEY IN ACCESSORY OR IGNITION ON POSITION 1. Antenna faulty. 1. Replace the antenna. 2. Radio ground faulty. 2. Check for continuity between radio chassis and a known good ground. There should be continuity. Repair ground, if required. 3. Radio noise suppression faulty. 3. Repair or replace ground strap as necessary. 4. Radio faulty. 4. Refer to appropriate Diagnostic Service Manual. 5. Faulty rear window defogger. 5. Verify that the rear defogger grid is functioning properly, repair as necessary (Refer to 08 - Electrical/Heated Glass - Diagnosis and Testing). NO COMPACT DISC OR DVD OPERATION 1. Faulty CD/DVD. 1. Insert known good CD/DVD and test operation. 2. Foreign material on CD/DVD. 2. Clean CD/DVD and test operation. 3. Condensation on CD/DVD or optics. 3. Allow temperature of vehicle interior to stabilize and test operation. 4. Faulty CD/DVD player. 4. Refer to appropriate Diagnostic Service Manual.

Nov 01, 2017 | 2009 Dodge Journey

1 Answer

How do you know if your mazda3 2004 water pump leak


Park your car overnight and put a large white piece of paper underneith your car. In the morning check the paper. If the paper is wet with liquid, you could have a water pump leak.

If the paper has green (in most cases) fluid on it, there is a good chance your vehicle is leaking coolant (sometimes refered to as "water"). In many cases, when you are leaking coolant it could be coming from the water pump.

Grab opposite ends of the water pump pulley and check for "play" (looseness): Try to rock it back and forth. There should be no give. If there is, the bearings are going and it's time to replace the water pump. By the time you can feel play in the water pump pulley, you may also be able to hear the bad bearing when the engine is running - there may be a low-pitched grinding noise coming from the water pump pulley

Visually check the water pump (it's located behind the pulley) for signs of a coolant leak. If the water pump gasket is leaking, it must be replaced. This is a good time to get a new water pump, too, unless it was just recently replaced.

Nov 04, 2009 | 2004 Mazda 3

1 Answer

1999 Cougar radio display works sometimes


the radio display is lighted from the back by a miniature bulb, this is the problem, the filament is almost burned out or the bulb is loose in the socket, to replace this bulb u must remove the radio (requires special radio removal tool kit, about $6.00) and then the top cover off the radio, the bulb socket twists into the back of the display, you can buy the bulb at any parts store for about $2.00

Jun 16, 2009 | 1999 Mercury Cougar

1 Answer

Radio display


If the radio is of the newer LCD variety and most of them are of this type the reason would be because behind the display are usually 3 small lamps /light bulbs used to backlight the display and they are probably all burnt out and need to be replaced. This job cannot be done by most people and best repaired by an electronic technician with a soldering tool.

Rich Lilja

Dec 02, 2008 | 2004 Land Rover Range Rover

1 Answer

'89 Raider 3.0 Water pump


Remove the intake? No, the water pump is in front. The water pump play can cause the belt to off track.

Jun 10, 2008 | 1989 Dodge Raider

2 Answers

Ford focus radio display is out


The display of the radio has micro contactes around the edges of the display. The cleaning agent used to clean the dash area could have been damaged. Best reccomandation is to have the unit replaced or taken to a repair shop and have the face plate repaired.

May 29, 2008 | 2003 Ford Focus

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...