An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: side view passenger mirror
There will be a small triaglular panel in the furthest side of your door which despite it being hard to come off will clip off. try to take care while pulling this off as the pins can snap quite easily. then you will see the 2/3 bolts connecting the mirror. once you have undone these then unplug electrics which im presuming from age it has, and you will be ready to connect new one.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Or maybe the recall on the fuel return line
2001 Dodge Stratus Recall Date: 10/27/2000
2001 Dodge Stratus Component: FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
Potential Units Affected: 13100
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE OUTER LAYER
ONLY OF THIS 3-LAYER FUEL RETURN HOSE DOES NOT CONTAIN THE DESIRED OZONE
PROTECTION DUE TO A PROCESSING ERROR.
THIS HOSE IS CONSIDERED TO BE INADEQUATE.
DEALERS WILL REPLACE THE FUEL RETURN HOSE.
you should be able to take it off from the inside of the car directly behind were the mirror is. usually ther eis a molding cover ing the mounting screws . take off the molding , mabey a few screw then some body clips that just snap off. now you should unplug the harness if necessary and remove the three or four bolts that hold the mirror on, and that should be it. hope this helps
Watched my dad do it this afternoon. There is an exposed screw on the left side of the door panel and one at the bottom of the panel. There are also two hidden screws, one behind the door handle and one inside the little hole in the armrest (pop off the plastic plugs). There are also three recessed screws behind the speaker cover. You can pop the speaker cover off with a flathead screwdriver. I'm pretty sure thats all of them. You can pop the panel off then, but watch the wires connecting stuff inside. The hardest part is getting it over the door lock. .
Once the panel is loose you have to pop off the black plastic cover hiding the back of the mirror. There are three recessed bolts holding the mirror. My dad had to get a special wrench to get those off and he dropped one inside the door, so be careful (we fastened a magnet to a coat hanger and got it back). Mine had some remote gizmos, so he had to had to unplug the little square thing and then popped off what was left of the old mirror. If your new mirror has a wire with a little box, feed it through the hole and plug it in. Once you have it positioned correctly, you can screw on the bolts and put eveything back together. It helps to have another person there while you are trying to position the mirror correctly. Hope I didn't miss anything. Good luck!