Question about 2000 Hyundai Sonata

1 Answer

Signals not working hazards out all fuses are good

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Could need to replace the switch used to turn signals, if not that could need to go into steering wheel?

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's your problmy turn signal light and hazard lights went out on my 2007 suzuki forenza fuses are still good em?


The Hazards and flashers both work off the same "combination relay, it is defective, replace it.

Feb 08, 2012 | 2007 Suzuki Forenza Sedan

2 Answers

I have a 1995 grand prix Blinkers dont work but, other lights do.


First check turn signal fuse and relay if, they are good then try pressing on and off the hazard switch while turning the signal switch on.If signals start to work replace hazard switch.If hazard switch is good then replace turn signal switch.

May 02, 2011 | 1995 Pontiac Grand Prix

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

1 Answer

The turn signals do not work when you use the signal switch. However, the emergency flashers do work. The fuse was checked and is good. Everything else on the signal stem works: the cruise control,...


if the fuse is good and all the lights work(if you checked them when the hazards were working)then you need a signal flasher,the signals have a separate flasher and it looks like the hazard flasher.if you turn on the hazards and look for it under the dash then you know what the signal flasher looks like,it is located on the fuse panel of in that area.

Mar 18, 2011 | Oldsmobile Bravada Cars & Trucks

1 Answer

1998 taurus - turn signals were working - pushed the hazard lights button - hazards did not work and also now turn signals do not work


Check the fuse/relay panel for a blown fuse/relay. Also look at the turn signal flasher and the four way flasher located in fuse/relay panel for problem. If the fuses are good replace the flashers to correct the problem. Hope this will help you.

May 20, 2010 | Cars & Trucks

3 Answers

Turn signals dont work


that could easily be just the fuse or the flasher unit. both are on the driver side under the dash

Mar 10, 2010 | 1991 Ford Tempo 4 Door

1 Answer

Turn signals won't come on inside or outside of car but hazard lights come on inside and outside of car


Check turn signal fuse, if fuse is good, check turn signal flasher, this is identical to hazard flasher, I believe on the 1997 it is located under the dash near the center console. The turn signal and hazard flashers are the same part number so try switching places with them and see if the turn signals work. If turn signals work after switching them you need a flasher.

Nov 09, 2009 | 1997 Chevrolet Camaro

1 Answer

Haz flashers wont work but blinkers do


There are 2 seperate flashers 1 for turn signals and 1 for hazard.The hazard flasher is located in the convenance center the turn flasher in the fuse box. Also seperate fuse's for each. One battery circuit for hazard Ignition for turn signals.Check fuse for hazard,if good try swapping in the turn signal flasher and see if hazards work.They use the same flasher unit.

Aug 20, 2009 | 1993 GMC Safari

1 Answer

Can't find turn signal relay.


check the hazard switch on some cars its part of the hazard switch or if the conection is bad they none of it will work.

Mar 16, 2009 | 1994 Chrysler LHS

Not finding what you are looking for?
2000 Hyundai Sonata Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...