Question about 2000 Chrysler Concorde

1 Answer

I have a 2000 chrysler concorde with possible

I have a 2000 chrysler concorde with possible timing problem,engine has nasty knock,egine is a 2.7 v6 164km,is it worth fixing for $1300.00

Posted by on

  • chris7234 Feb 25, 2009

    the 1300.00 is for new timing chain&gears with labour,But was advised not to do the job.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,118 Answers

I would say thats for you to decide. You got to weight all your options, whats the1300.00 for replacement engine? Or what, if it was up to me i would most likely get a nother car but thats me, you got to do whats best for you and your situation.

Posted on Feb 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 chrysler concord nocks pings left side

Knocking and pinging are two separate things. "Knocking" usually refers to the sound an engine makes when internal mechanical parts, such as piston rod bearings or connecting rod bearings, begin to wear and cause a deep "knock, knock, knock" sound during engine rotation. "Pinging" refers to the tapping sound you get upon acceleration, either when using fuel that is to loo octane for the vehicle, or when static timing is set too far advanced, or when the cylinder heads are overheating due to clogged water channels or thin oil.
If you are hearing KNOCKING on the left side, it is likely time for an engine rebuild. If you are hearing PINGING, you may need a better grade of fuel, or you are way overdue for either an oil change or a major tune-up.

May 10, 2015 | 2003 Chrysler Concorde

1 Answer

Engine noise on chrysler concord 2000 2.7 v6 what is cause?

please be more specific describe the noise if possible post a video it could be anything from a noisy belt lifters ticking or a pulling going bad or worse a rod knocking

Jan 25, 2013 | Chrysler Concorde Cars & Trucks

1 Answer

My 1997 chrysler concorde has some knocking to it i got the oil change but it is still knocking

is the noise from the front of the engine or sides? If its from the front its most likely the timing components

Apr 18, 2012 | 1997 Chrysler Concorde

1 Answer

I need to know: Which cylinder is the 4th cylinder on the 6 cylider Chrysler 2.7L DOHC 24 Valve engine?

Check this diagram for...
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "U"
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "V"
2000 Chrysler Concorde 2.7 liter DOHC V-6 VIN "R"


Good luck (remember to rate and comment this answer).

Mar 28, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

I have a 2000 Chrysler Concorde and the Oil sensor light came on. it was down a quart of oil and it has only been 5000 miles since last oil change. Had oil change done and within 6 miles the oil sensor...

I'm betting that this is the 2.7L engine. If it is, you may have caught this in time. There is a very good possibility that the oil pump intake has become plugged with sludge. You will have to have the oil pan removed so that the pick-up can be cleaned and the engine flushed out. After that you must use synthetic oil. This was a huge problem, lawsuits galore. Google: "2.7L sludge" for more info.

Apr 30, 2010 | 2000 Chrysler Concorde

1 Answer

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340

P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

May 29, 2009 | 2000 Chrysler Concorde

1 Answer


more than likely it could be a crank postion sensor but more than likely the tranny is slipping or having torque converter failure.

Mar 10, 2009 | 2000 Chrysler Concorde

Not finding what you are looking for?
2000 Chrysler Concorde Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides