Question about 2008 Ford Fusion

1 Answer

How do I replace a drivers side front seatbelt on a ford mondeo

The seat belt is badly frayed and will notpass MOT

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

Well the seatbelt in the front of a car are very strong and should be bolted in both from the underneath of the car in the middle and on the edge of inner door seal, most upto date cars there will be a cap which removes from angle at top most point of seat belt to undo. all bolts should be lock tighted(chemical metal) to seal and not undo in unlikey event of bad crash.

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Seatbelt warning light keeps flasing when seatbelt is fasten


Belinda, could be a bad wire,plug,seat belt switch/sensor. Have a good tech. diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Seat Belt And Battery Lights Flashing
Driver Side Seat Belt Buckle Open short
Hyundai Seat Belts Repair Replacement

Aug 11, 2016 | 2005 Hyundai Accent

2 Answers

Seat belt light flashing when ignition turned on


A bad seat belt switch inside the buckle, try some tuner cleaner from best buy or radio shack

Nov 25, 2013 | 2011 Ford Focus

1 Answer

IN MY 2004 FORD EXPLORER, THE DRIVERS SIDE SEATBELT IS JAMMED, NOT ALLOWING ME TO CLICK IT IN, CAUSING THE SEATBELT REMINDER ALERT TO CONSTANTLY BEEP.


Due to the liability the clicking part of the seat belt will need to be replaced do not attempt a repair your safety depends on it

Jun 04, 2011 | Ford Explorer Cars & Trucks

1 Answer

I have a 2010 Ford Fusion. The seats belts are so tight that I can't stand to wear them. Especially the one on the drivers side. It is like with every little jar it tightens up. I have to hold it...


hello from Fordland!
your dealer is able o supply you with a seatbelt extender at no charge. this is a courtesy that ford gives to thei owners. see your local ford dealer for details..i hope this helps, your thumbs up is appreciated....BTW, the right front and all rear seat belts have a child safety feature buil into the retractors. it will cause the seatbelts to cinch tight an not release once engaged, until the seatbelt has been fully retracted therby releasing the locking mechanism...this feature is only engaged when the retractor is pulled out to is fullest limits, at that point you will hear a ratcheting noise as it retracts....

May 24, 2011 | 2006 Ford Fusion

1 Answer

We have a 2001 V4 Ford Escape, and while driveing today the seatbelt light began to rapidly flash. The owners manual does not have any indication as to what this means, and the seatbelt for the driver was...


There is a TSB to replace chafed wires on the seat belt pretensioners. Most common cause.
Both front seats have to be removed to perform the TSB. It involves replacing the male and female connector to the seat belt buckle pretensioner. In an accident, it fires and temporarily tightens the seat belt to take up slack. I think TSB 05-17-5.

Apr 05, 2011 | 2001 Ford Escape

1 Answer

Front drivers seatbelt wont ckick in place and missing middle rear seatbelt in a 1997 ford taurus can these be fixed or replaced


yes if you visit the scrapyard ,easy job to renew ,look under the back seat in case the middle belt is under the seat

Nov 03, 2010 | Ford Taurus Cars & Trucks

2 Answers

How do you fix a stuck seatbelt in front seat passenger side? The seatbelt has retracted but will not release outwards to enable its use. We have pulled off interior cover of the seatbelt to get access to...


this is a simple repair many dont know. remove or pull off plastic pillar post cover, seatbelt probably twisted inside. twist it back around so it runs flat and lube slightly with a light lube spray on metal gearing. i had the same problem w mine pk

Jan 16, 2010 | 1998 Ford Taurus

1 Answer

Drivers side seatbelt connected When truck is


sensor in the seat belt bukle needs to be replaced

Aug 01, 2009 | 2004 Ford F150

1 Answer

SEAT BELT BUZZER WHERE IS IT


does it do it on the driver side? hook it up without sitting in the seat start the rig if the buzzer is on sit in the seat if it is still on you have a bad ground on the seatbelt side the short belt that it connects to. the buzzer is under the dash driver side above the sterring wheel.

May 24, 2009 | 2003 Ford E150

1 Answer

Back seat belt replacement


Due to this being a safety item all parts and install must be completed by the dealer.

Jan 15, 2009 | 2005 Ford Escape

Not finding what you are looking for?
Cars & Trucks Logo

349 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...