Question about 1994 Ford F150 Styleside Supercab

1 Answer

1994 ford f-150 with day time running lights headlightnot working

I have replaced the switch the fuses all are good markers and tails all work can flash high beams with turn stock but they will not stay on hi beam yes the bulbs are good no low beam either reohstat works dash lights dim do headlights go thru module?? need wiring diag

Posted by on

  • 1 more comment 
  • mr_f_off Feb 26, 2009

    THANKS for the help this has been a big help I don't suppose you would have a wiper diagram washers are stuck on as well as wipers tried old and new multifunction switch both have the same issue

  • mr_f_off Feb 27, 2009

    once again thanks for the help looks like wiper control module has had it. Nothing money can't fix.appears to be an oem part

  • Anonymous Mar 21, 2009

    How did you fix your problem.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Daytime Running Lamps
The daytime running lamp (DRL) system is designed to turn the high beam headlamps on, with a reduced light output, and without illuminating the high beam indicator lamp in the instrument panel. You have a DRL Module.
The multifunction switch is the stalk on your column.

This is 96 F150 circuit. Don't have 94.

1994 ford f-150 with day time running lights headl - 51f651c.gif
Symptom Chart, Headlamps HEADLAMPS Condition Possible Source Action

  • Headlamps Inoperative
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • Blown fuse.
  • GO to Pinpoint Test A .
  • Headlamps On Continuously
  • Circuitry open/shorted.
  • Damaged headlamp switch.
  • GO to Pinpoint Test B .
  • High Beams or Low Beams Inoperative
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test C .
  • One High Beam or One Low Beam Headlamp Inoperative
  • Circuitry open/shorted.
  • Damaged connector.
  • Headlamp bulb damaged.
  • GO to Pinpoint Test D .
  • Flash-to-Pass Inoperative
  • Blown fuse.
  • Circuitry open/shorted.
  • Damaged multi-function switch.
  • GO to Pinpoint Test E .



73d6d64.gif

Posted on Feb 25, 2009

  • gerry bissi Feb 26, 2009

    96 f150










    • Windshield Wipers Continue to Run When Switch Is Turned Off



    • Windshield wiper motor.
    • Wiper control module.
    • Multi-function switch.



    • GO to Pinpoint Test G





×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dashboard and rear tail lights not working changed rear taillight bulbs and fuses was wandering if a blown bulb in the dashboard effects my no taillight problem


Dash, tail, and park lights are out - CarGurus

www.cargurus.com > Questions > Ford > F-150

CarGurusMar 19, 2013 - On the way to work I get pulled over, no tail-lights. ... Your ground is good because your other lights are working. I would .... hey my #6 fuse keeps blowing..no tail lights no dash lights.. head lights brake lights work fine.. also ...

No Dash lights, tail lights or Marker lights But Headlights, brake ...

forum.ih8mud.com > Forums > Toyota Tech Forums > 80-Series Tech
Dec 6, 2014 - I pulled over checked the fuses and again the Tail light fuse was out Put a new one in nothing. Now my taillights don't work but Brake lights, ...

Dash lights and running lights not working after installing ...

? 1:25
https://www.youtube.com/watch?v=SK36wPXo2EQ
Feb 11, 2014 - Uploaded by 4Runner Nation
I came to discover that the dash lights and running lights nolonger work. ... my brake lights and headlight i ...

I have no dash lights or tail lights - JustAnswer

www.justanswer.com > Buick

Jan 14, 2016 | Cars & Trucks

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

2 Answers

Subaru outback wagon tail light not working off


There are several components of your 1997 Subaru Outback that can cause your tail lights to stop functioning correctly. To help pinpoint the cause of the problem, it would be very helpful to also check your front marker lights. If the marker lights are working, then we know that the problem is not the headlamp switch or the tail and illumination relay (located in the fuse and relay box).

The components to check are:

> Fuse #23 (20 Amp) in the Main Fuse Box.
> Fuse #5 (10 Amp) in the Fuse and Relay Box
> Tail And Illumination Relay
> Headlamp Switch

May 06, 2012 | 1997 Subaru Outback

1 Answer

2004 Ford F-150 4X4 side marker lights not working. is there a seperate fuse for them?


The marker lamps are on with the parking lamps ( the low wattage element in the tail lamps ). If you are missing a single parking lamp, chances are the bulb is burnt out.

Apr 13, 2011 | 2004 Ford F150

1 Answer

1994 Grand Marquis, marker, tail and dash lights not working. Brake and turn signals work, fuses are all good, checked them all. Worked on passenger side door window, removed door panel, don't think this...


Your light switch is bad. The switch controls what you listed plus headlights,obviously. I've had this problem before. headlights would be on, but nothing else.

Feb 25, 2011 | 1994 Mercury Grand Marquis

1 Answer

Marker lights do not work. 1994 nissan pickup SE


I would start by checking all the fuses, then check the headlight switch,test it for power as you did the tail light, then check the wiring coming out of the cab down the frame to the rear of bed check for a short but if all fuses are good then will not be a short, may be a bad switch and the most important is the bulbs, make sure they are good.

Jul 05, 2010 | 1994 Nissan Pickup

1 Answer

1994 Camry - Brake Lights Work, Tail Lights Wont


Well Jennifer, it sounds like you've done all the things that I'd have done. Try for a bad ground next. Do the lights in the dash cluster work? They're wired together with the tail-lights (so that you know if the rears go out). There should be a ground wire somewhere connecting the body to the engine or chassis.Look around the rear of the engine bay. Good Luck.

Jun 10, 2009 | 1994 Toyota Camry

2 Answers

Blows fuses when parking lights are turned on. Headlights work fine even running lights.


If it only happens when you turn the switchto the parking lights then it is most likely the swich that is the problem. Light swich failure appears to be a common fault with fords

Apr 21, 2009 | 2000 Ford Focus

1 Answer

Running lights for a ford f 550 will not come on


i spliced a wire from the tail light running light to the trailer light connection assem. where all the running lights were connected

Jan 07, 2009 | 2009 Ford F-450 Super Duty

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

Related Topics:

1,226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...