The front and rear turn right turn signal dash light and exterior lights do not work. However when i put on the hazard light the front right works but not the rear. That brake light also doesn't work but the the running light does. all sockets and bulbs have been tested. Any Ideas?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The rear left turn signal bulb must be replaced immediatly before it melts the light socket, if it has'nt yet. Also please verify that the correct light bulb is being installed. because even though many bulbs look the same they are not identical. Installing the wrong bulb can be the begining of many, many problems in the particular circuit
It may be a turn hazard module under dash.that is the culprit! The power to the third brake light does not go through the module, but the rear brake lamps power is controlled through this module. I am looking at a drawing of one and it looks like it has two connectors with about five wires in one and six in the other. It has some cooling fins on it also.
I would Get in the Back pull up anything covering the Wiring harness for those lights and Look for A Corroded Connecter AND the GROUNDS on all thats why urn comes on while you Brake Electricity Finds the Easyest PATH to GROUND AND IF IT IS THROUGH THE Turn Sygnal switch GROUND is your FIRST PRIORITY here Trust me I'm ASE Certified in Electrical Systems
Grounds FIRST Please Dont forget to RATE me Thank You !