Question about 2000 Mazda B-Series

1 Answer

Lowering a Mazda B-4000

Hey what up? i have a mazda b-4000 with 20's on it and i would like to lower it like 3 inch, whats the most cheaper way of do it myself?

Posted by on

  • miltzx11r
    miltzx11r Feb 26, 2009

    thankz you........

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Flip the leaf springs and smaller shocks and spring in the front, after lowering the rear see space between wheel and fender, subtract from stock height from wheel to fender and subtract from front spring and shocks

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of automatic transmission drain plug on a 2008 Mazda Tribute


If there is a drain plug, it will be on the bottom transmission pan. If no drain plug, the transmission is drained by loosening the pan bolts and lowering one end of the pan till most is drained. Then remove the pan.

Sep 14, 2015 | Mazda Cars & Trucks

1 Answer

Car accelerates itself


If it is an auto then it is possible it is idling to high and the trans is still engaged despite you foot being off the peddle. Try lowering the idol speed as a first resort.

Oct 25, 2013 | Mazda MPV Cars & Trucks

1 Answer

Where is the transmission dipstick on a 96 mazda mpv 4wd


My 2WD 1996 Mazda MPV transmission dipstick is a black stick, from out side, it look about a foot long from bottom to top with a black handle that is about 2 inches long and 3/4 inch wide. It is locate between the battery and the engine, actually, the top of it is a little bit lower than the bottom of the battery and closer to the front of the engine where the belts are.

Feb 26, 2012 | 1996 Mazda MPV

1 Answer

I cant find the transmission dipstick on my 96 mazda mpv 4wd


My 2WD 1996 Mazda MPV transmission dipstick is a black stick, from out side, it look about a foot long from bottom to top with a black handle that is about 2 inches long and 3/4 inch wide. It is locate between the battery and the engine, actually, the top of it is a little bit lower than the bottom of the battery and closer to the front of the engine where the belts are.

Feb 26, 2012 | 1996 Mazda MPV

1 Answer

My driver side window wont go up in my mazda 3. what do i need to do


remove the door trim and apply direct battery voltage and ground to the regulator motor. there will be two contacts at the motor connector. reversing positive and negative changes rotation of the motor, raising or lowering the window. If the window rolls back up replace the switch if the window does not go up replace the regulator/motor assembly.

Dec 15, 2010 | Mazda MAZDA3 Cars & Trucks

1 Answer

1998 Mazda B4000 climate control fan


replace the blower resister mounted in the blower box

Jun 28, 2009 | 1998 Mazda B-Series

1 Answer

87 mazda rx 7 n/a cutting out at 4000rpm


Sounds like plugged up pre cats, my NA had the same problem I got a Racing Beat header that eliminated the pre cats and it went away. I've also seen them on eBay for cheaper. Either way you can't lose the stock header is like a cast iron stove attached to the engine it's heavy and massive.

Dec 03, 2008 | 1987 Mazda RX-7

1 Answer

91 mazda gtx


On a mazda gtx (4x4 turbo) 1840cc
oil bolts and tighten in 3 even stages

30 ft lbs or 60nm
40 ft lbs or 70nm
60 ft lbs or 81nm

torque sequence is:

inlet side
8 4 2 5 9
10 6 1 3 7
exaust side

Oct 17, 2008 | 1991 Mazda 323

1 Answer

Installing a tension pulley


I have been a mazda mechanic for 20 years you have to pull of the front of the engine if you do not know what you are doing you will destroy you engine so take it to amazda dealer cheaper in the long run

Jul 23, 2008 | 1998 Mazda Millenia

Not finding what you are looking for?
2000 Mazda B-Series Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...