Question about 1995 Chevrolet Suburban

Open Question

95 suburban k1500 4x4 Front Torsion bar problem

I recently purchased a 95 suburban. I am replacing all the bushing, tie rods, upper & lower control arm bushings, and sway bar repair kit. we took it all apart and didn't mark the torsion bars in any way. now we are having an issue with getting the torsion bars right so the front end is correct. We have tried different ways to get it right but it isn't working. any help would be greatly appreciated.
Thank You

Posted by on

6 Suggested Answers

  • 4793 Answers

SOURCE: knock in right front when turning my 84 chevy c10 truck

next move is upper suspension bush(on top of shocker.)

Posted on Mar 30, 2010

  • 2309 Answers

SOURCE: I need to replace my lower ball joints, my truck

place a stand under the control arm and you will be ok.

Posted on Apr 20, 2010

airjer995
  • 5332 Answers

SOURCE: 2003 chevy express 2500 front end issues

Get a second opinion. Do not tell them what the other guy found. If they find the same things than go back to your regular mechanic, have him make the repairs, and thank him for catching those problems before they failed and potentially caused serious injury to yourself!

or if they find something else have them make those repairs.

or have you regular mechanic show you why he thinks those parts need to be replaced. The should be sloppy enough to see with the naked eye and he should be more than happen to show you the movement or problem with all of those parts. If he doesn't than find somebody who will.

Posted on Sep 26, 2010

  • 19 Answers

SOURCE: 2000 Jimmy feels like its floating and lot of play

Hi.. All of the above need checked plus track rods and ends, steering box play, steering column linkages,also at the wheels check the wheel bearings for excessive play and finally the ball joints holding the hub casings. I hope this info is of some help to you please let me know..
Regards Ronnie.

Posted on Oct 21, 2010

tripletauto
  • 1450 Answers

SOURCE: My 96 Camaro has the rear swaying a little extra

check the rear track bar bushings this runs from side of axle up to body. also the lower link bushings in rear. have you checked air pressure ?

Posted on Dec 23, 2010

1ATony
  • 159 Answers

SOURCE: 99 chevy venture front sway bar broke

The sway bar is pretty easy to fix. Here's a video that will show you exactly how to change the one in your Chevy Venture.">

Posted on Feb 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Front driver side leaning inward, have changed strut,etc...


Upper and lower ball joints. Control arm bushings bad. or both.

Jul 09, 2016 | Cars & Trucks

3 Answers

My front axle is rubbing and tearing my boot why


Do you mean the tie rod end? Did you recently change your tires and/or wheels? Wheels can have different offsets, so choose carefully if you change them. I had problems with my track bar on mine. It was wrecked before though. Has yours suffered front end damage that you know of? Have someone watch underneath while to turn your wheels back and forth slowly. They should look for anything shifting or separating.

Aug 09, 2015 | 2004 Ford F150

2 Answers

Car shekes when hit bumps


Check for bad wheel balance, struts, lower ball joints ( no upper joints) , outer tie rod ends, inner tie rod ends, stabilizer bar bushings, lower control arm bushings , and finally a wheel alignment ,you have some bad looseness in one or more of these front end parts. GOOD LUCK FRIEND.

Mar 15, 2015 | 2001 Dodge Intrepid

1 Answer

Have replaced all tie rods; inner&outer;struts&upper mounts;sway bar bushings & links;lower control arms with ball joints& passenger side upper motor mount.none of these have changed this noise even s


What noise? And year and make of car?
A clicking noise on turns is a worn CV joint on the axle shafts. A grinding noise at one of the wheels could be a wheel bearing. Worn brake pads may cause squealing, screeching other high pitched noise.

Jul 25, 2013 | Cars & Trucks

1 Answer

What does the control arm on the front left driver side supposed to look like fully assembled


Hello! First diagram is the lower...Second is the upper..Guru...saailer

LOWER IDENTIFICATION:




Item
Part Number Description 1
5495 Stabilizer Bar Link Bolt and Bushing Assembly 2
18A192 Nut, Washer and Bushing Assembly 3
808264 Bolt 4
5005 Frame 5
5B326 Torsion Bar (LH) 6
5B327 Torsion Bar (RH) 7
620481 Nut 8
5C491 Nut and Washer 9
3079 Front Suspension Lower Arm (LH) 10
3078 Front Suspension Lower Arm (RH) 11
3A130 Tie Rod End 12
808166 Nut 13
808167 Nut 14
5K483 Front Stabilizer Bar Link 15
5482 Front Stabilizer Bar 16
5484 Front Stabilizer Bar Bushing 17
3B353 Front Stabilizer Retainer 18
N807396-S100 Bolt A
- Tighten to 40-55 Nm
(30-40 Lb-Ft) B
- Tighten to 150-200 Nm (111-148 Lb-Ft) C
- Tighten to 21-29 Nm
(15-21 Lb-Ft)


UPPER IDENTIFICATION:
Item Part Number Description 1 3C156 Damper Assembly (RH) 2 805348 Nut and Washer 3 - Shock Absorber Insulator
(Part of 18198) 4 3C157 Damper Assembly (LH) 5 3020 Front Suspension Bumper 6 3083 Front Suspension Upper Arm Assembly A - Tighten to 34-47 Nm
(25-35 Lb-Ft)



LOWER DIAGRAM FOLLOWED BY UPPER:

2_12_2012_9_47_51_pm.gif2_12_2012_9_54_26_pm.gif

Feb 12, 2012 | 1996 Ford Explorer

1 Answer

At about 55 60 front end shakes some times bad and at a slow speed you can feel the truck sway from left to right


sounds like you need work done. hard to say what is worn out without putting it on a lift and grabbing stuff, but here is what I would check: ball joints (lower and upper, if it has them), tie rod ends, steering gear. While under there, might as well look at bushings, torsion bar links and anything else that can wear out. Let us know if you have more questions.

Sep 09, 2010 | 2000 Ford Expedition

1 Answer

95 explorer lower control arm replace


No the torsion bar if you look at it where it goes to the under carriage it will have a bolt for tension on each side. Are you tring to replace the bushings for the torsion bar? If so answer back.

May 08, 2009 | 1983 Plymouth Gran Fury

2 Answers

I HAVE A 1998 GMC JIMMY 4X4 .. IT SEEMS AS THOUGH WHEN I PUT IT IN 4 WHEEL DRIVE IT PULLS ALL OVER THE ROAD . IT KINDA FEELS LIKE IM DRIVING AGAINST SOMEONE .. I HAD MY UPPER AND LOWER BALL JOINTS DONE AND...


inspect frt end tie rods,idler arm,pitman arm,inner tie rods,steeringbox,control arms upper and lower bushings.1or more of these parts could be worn

Feb 25, 2009 | 1998 GMC Jimmy

Not finding what you are looking for?
1995 Chevrolet Suburban Logo

Related Topics:

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...