Question about 2003 Dodge Durango

2 Answers

Problems with ential engagement of transmission

When you start off from stop, the engine revs but don't seem to do much it takes a good block to get it to stop

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,674 Answers

It may be a simple as a fluid & filter change (only use mopar ATF4) , but personally, with the price of a transmission replacement, I'd take to dealer or someone you trust, and have the transmission scanned for faults or updates. If it's an outrageous estimate for repairs, get a second opinion, like local transmission shop.

Posted on Feb 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 398 Answers

Fool around under the hood with the throttle. cable may be stuck.

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda crv wont engage gears. engine just revs as if in neutral


sounds like a failed clutch or broken transmission

Mar 24, 2014 | 2001 Honda CR-V

1 Answer

Ford e-250 transmission problems


My Econoline 250 with 4.2 lost fluid from hose leak, fixed leak everything was normal for 3 days till I drove it on highway. When it went into overdrive lost forward power. Turned off OD and did ok for a while. Lost forward gears slowly, put in fluid, hard to tell when full. Reverse is fine but have to rev up engine to get forward to engage, then everything is fine at lights and such till take out of drive, then have to rev engine to about 2500rpm to engage drive. Help?

Nov 05, 2013 | 1990 Ford F250

1 Answer

Compressor and fans do not turn on until rev engine


I passed this question the first time I read it, so I will take a stab at it now.
The fans don't come on until the compressor has pumped the freon pressure up to say 150 or 200 psi. And the compressor clutch has to have voltage to engage the clutch.
I wonder if the clutch is going and needs 14 volts instead of 12 to engage ? Or the relay that powers the clutch ?
Speeding up the engine would increase voltage from the alternator.
This is assuming the serpentine belt is tight and everything else is working correctly.
I think I would swap the relay with another and put a meter on that circuit to the ac clutch to see what it takes to engage it.

Jul 24, 2012 | 1992 Buick Regal

1 Answer

Recently replaced the transmission with one from a salvage yard. I have to rev the motor in nuetral before transmission will engage after I do that it works as it should, except when I come to a complete...


low transmission fluid level about a litre and a half should cure it at a rough guess ,start engine ,handbrake on then select reverse and then check oil level it definatly sounds low to me

Nov 03, 2010 | Chevrolet Lumina Cars & Trucks

1 Answer

351C with FMX auto, Wont engage drive with high RPM


A CLEVELAND ENGINE IN A FAIRMONT????HMMMMMMMMMMMM....SOUNDS LIKE THE PUMP IS GOING BAD. DO YOURSELF A FAVOR AND JUK THE FMX AND GET A GOOD USED OR REBUILT C-6 INSTEAD.

Dec 15, 2009 | 1983 Ford Fairmont

1 Answer

Transmission slips when hot


its either low on fluid or the clutches & bands are worn or need adjusting!
DONT REV IT!
get itserviced QUICK SMART! & check for leaks!

Jul 20, 2009 | 2004 Volvo S60

1 Answer

Auto transmission slips then grabs


first thing i would try is changing the transmission fluid out and filter, i beleive its almost 8 quarts. use a full quart of lucas transmission additive with the new fluid. if this doesn't help, the transmission will either need replaced or rebuilt

May 24, 2009 | 1996 Ford Probe

1 Answer

Buick 2000 Le Sabre-transmission does not engage in any gear.


Try unplugging the electrical connection on the transmission to lock it in 3rd. It might get you moving. Although the transmission is going to need rebuilt or replaced.

May 24, 2009 | 2000 Buick LeSabre

1 Answer

Transmission problems


try changing the gearbox oil first.

Oct 04, 2008 | 1993 Land Rover Range Rover County

Not finding what you are looking for?
2003 Dodge Durango Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...