Question about 1993 Ford Bronco

1 Answer

Tail light not workin

I have a 93 ford bronco the driver side tail light does not work i put a new bulb in it an checked the fuses the break light works an th turn signale but the tail light does not

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

Can only really be the wiring with what you have told me? if you take an voltage meter and check for voltage. if nothing then maybe a quick look at the lighting tracks on the unit itself.

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake light failure


Bad circuit board tail light asseblise connector pin to board poor connection or burned push in light bulb sockets
On my '93 Chevy PU the new ones went bad within months I repaired the original ones by soldering all connector pins to the board cleaned the sockets chipping out melted plastic been working for five years now.
Care must be taken to keep solder from preventing wire connector install while using enough that plugging it in will not break these delicate unions.
Required pulling them several times to Finnish repair successfully.
Very disappointed in replacement parts.

Apr 22, 2016 | 1987 Toyota Celica

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

Tail lights work but not brake lights 93 toyota camry


The brake light side of the bulbs is powered by the brake switch and travels thru the turn signal switch.
If the third brake light works, I would guess the problem is in the turn signal switch.

Jul 02, 2012 | 1993 Toyota Camry

2 Answers

My tail lights are not working on my 2000 jetta the front lights work the break lights work and the blinkers work all inside lights work just fine


you need new bulbs in tail lights one bulb in each side has two elements one works brake other works running lights the elements in the bulb for tail lites are bad . so just replace bulbs. hope this helps.

Sep 13, 2011 | 2002 Volkswagen Jetta TDI

1 Answer

I just purchased this 1987 Bronco II; when I got it the tail lights were not working, then after I checked fuses and installed a stereo they began working. However, only for a day or two and then they...


You have a lose wire when you put the new raido in you moved it and it worked and then stoped. check the brake switch its at the top of the brake pedal. I have the same thing and last year i had to rewire that whole system because they all melted almost lost the truck but it was the emargancy flashers switch that shorted and the fuse didn't blow. Im not saying thats your problem but things like can happen even from bad connections so check them. I also have a schmatic if you need it

Dec 07, 2010 | 1987 Ford Bronco II

2 Answers

Ok have a 94 Bronco. Tail lights, Instrument and parking lights not working. head and break work fine. checked all fuses under dash, they all see to be fine. near as i can tell it would be the number 4...


take a test light to each fuse theres a contactor on each side of fuse make sure they are working properly and you show a positive reading on them as for burning something up possible but to find out pull fuse block off and make sure all the wires are good and connected to block fully

Sep 18, 2010 | 1994 Ford Bronco

1 Answer

1979 Ford Bronco 400M engine. Tail lights work but brake lights and turn signal lights do not work. The right signal light on the dashboard stays lit all the time. Is it probably my turn signal switch, a...


The brake light and the turn signal are the same bulb. Most of the time if the bulb on the dash stays on it is because a bulb is blown and thats the way it tells you.

Oct 29, 2009 | 1984 Ford Bronco

1 Answer

2006 Ford Ranger. Rear passenger side tail light


Bad earth connection.Clean or replce wire.

Jun 18, 2009 | 2004 Ford Ranger

1 Answer

1992 Ford Bronco tail, and dash lights not working, why?


Sounds like the fuse...check all of your fuse under and around the drivers side dash...it could also be the light bulbs are burnt out...pull the bulbs out and check to see if they are blackend

Apr 18, 2009 | 2004 Nissan Sentra

2 Answers

2001 Explorer Sport ,Rear Driver Brake Light and Turn Sig. Broke


Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.

Feb 12, 2009 | 2001 Ford Explorer Sport

Not finding what you are looking for?
1993 Ford Bronco Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...