Question about 1991 Chevrolet S-10 Blazer

1 Answer

Poured fuel into injectors no kick over cranks good

Cranks good no start, first time I poured fuel into injectors sputtered did not start. second time nothing even when fuel poured into injectors. I have checked plugs

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Check the crankshaft sensor and the cam sensor

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Hyundai Trajet 2002 Gasoline. I have a problem with keeping the engine alive.


The engine is running very rich that is why the exhaust is emitting black smoke. The engine needs a tune up so the air fuel mixture is correct.

Dec 02, 2012 | Hyundai Cars & Trucks

2 Answers

It will start run for a few seconds then die,u can pour gas in throttle body and it will run as long as your pouring gas in it,ive changed fuel filter.I checked fuel pressure and it is fine,60 psi.


Have you checked to see if the injectors are getting a signal? The best way is to hook a noid light to the injector wire harness and crank the engine.

Jul 12, 2011 | 1997 Chevrolet Tahoe

2 Answers

MY TRUCK CRANKS BUT WONT START , AFTER A CAUPLE OF TIMES , THAT HAPENS EVARY SO OFTEN. CANT YOU PLS HELP ME


CHANGE FUEL FILTER CLEAN FUEL INJECTORS.MOST OF THE TIME IF FUEL INJECTORS DIRTY WHEN YOU TURN OFF IGNITION FUEL INJECTORS WILL DRIP FUEL FLOODING ENGINE MAKING HARD TO START.POUR BOTTLE SEAFOAM TO A FULL TANK OF GAS.IF CRANKING TIME TAKES 2 TO 3 TIMES. HAVE CAMSHAFT SENSOR AND CRANKSHAFT SENSOR CHECKED WITH A SCANNER.

Jan 09, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

1994 ford escort station wagon 1.9.Don't know if it relates to the problem but car used to drag 3-4 cranks before firing up.Started car and it fluttered for about 3-4 seconds and then smoothed out.Drove...


If money is an issue I would take the sparkplugs out clean them witha a wire toothbrush check the gap and reinstall. sounds like a iginition problem

Apr 26, 2010 | 1994 Ford Escort

2 Answers

Vehicle won't get feul to crank. we replaced fuel


Of course you will need to check to see if the fuel pump is actually pumping, or damaged. I suggest that you remove the fuel filler cap, then have someone turn the ignition switch on while you listen through the fuel fill inlet to see if you hear the pump turn on for a few seconds then off. If you're hearing nothing and have no fuel, either the vehicle is not telling the pump to turn on, (verify voltage at the pump electric connection) or the pump is bad.

Generally, when you turn the ignition on, you should hear the pump for a second or two as it builds pressure, after replacing the fuel filter, you may need to do this several times to get pressure to the injectors, and to do that, just cycle the switch to on, then off, in 4 or 5 second intervals. The pump if working, will build pressure eventually allowing the vehicle to start. No need to crank, until you have fuel pressure, Just to "ON", then "OFF" several times.

I hope that you took the time to put some fuel injector cleaner (1/2 filled w/Gumout) into your new fuel filter when replacing it, it's a cheap fuel injector/fuel system cleaning method I've used for years when replacing fuel filters. It can cause a sputter or two initially, but does a good job.

good luck

Feb 28, 2010 | 1996 Chevrolet K1500

1 Answer

93 wrangler 2.5 will crank but won't start. I pour gas down the #1 cylinder and put the plug back in and it will crank for about 8 seconds then sputter to life and idle and run fine. Shut it off and try to...


Yes...check the pump, filter and output. Also check the ballast resistor for the pump. Stop pouring fuel into the cylinder...instead, use carb cleaner and spray into throttle body (excess fuel in one cyl will contaminate your engine oil). If it runs normally after you get it started likely the pump is good (unless you have problems at high rpm's under power) Regulator is likely good as well...default is to more fuel not less.

Oct 07, 2009 | 1994 Jeep Wrangler

1 Answer

Sputtering and hesitation when started


Change the fuel filter and this ought to solve the problem. Also, pour a pint of fuel injector clearer into your fuel tank periodically.

Aug 06, 2009 | 2002 Buick Century

1 Answer

Truck won't start every time but probally 95 percent of the time.


Yep fuel pump put a filter with it for peace of mind. Pump is in the tank drop tank remove round access hole replace pump go to town. gl dc

Jun 22, 2009 | 1996 Chevrolet S-10 Pickup

2 Answers

Good fuel pump, engine turns over but wont crank.


Check for spark. Pull a spark plug wire, put a screw driver about a quarter inch from it, and crank engine.

May 27, 2009 | 2000 Chevrolet Blazer

1 Answer

1988 gmc k1500 wont start


hi, check the connections at the ecm,i think it's under pass front seat,i've had a couple of those years loose injector signal at ecm connector,if you have a test light you can unplug injectors and test across terminals ,it's a 12v signal at inj ,if lights flash on both while cranking try plugging in one at a time and see if either sprays, if one does and not the other, you would have a shorted injector

May 05, 2009 | 1989 GMC K1500

Not finding what you are looking for?
1991 Chevrolet S-10 Blazer Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...