Question about 2000 Pontiac Montana

2 Answers

2000 pontiac montana

I need to refill my break fluid but i can not find where it goes.

Posted by on

  • John Jon May 11, 2010

    take it to a garage before you end up contaminating something!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Its above the master cylender right in front of the stearing wheel it is hard to get to but doable

Posted on Apr 12, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Its on the left side after you open the hood look in the back left side of the engine its a white container

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 2000 pontiac montana shifts hard after driving for a while?


have you checked the transmission fluid level ? when was it last changed ? have the OBD codes read as may point to a specific issue

Jul 22, 2014 | 2000 Pontiac Montana

1 Answer

Which solenoid would I need replaced: skips 3rd gear... goes straight from 2nd to 4th (2000 Pontiac Montana)


first you need to know engine and transmission faulty code
next it's a default mode when there is a faulty code this is why you need code
hope it helps

Apr 05, 2014 | 2000 Pontiac Montana

1 Answer

Want to drain and refill transmission


it will require dropping the pan you may as well replace the filter while the pan is off you'll need a gasket and new filter as well s gm fluid

Aug 27, 2012 | 2000 Pontiac Montana

1 Answer

I need to know what order the pushrods goes abck in in on a 2000 pontiac montana 4.3


The exhaust pushrods are the longer ones. The intake pushrods are the shorter ones.

Jun 08, 2011 | 2000 Pontiac Montana

1 Answer

We changed the pads, rotors, drums and shoes on our 2001 montana, after we were done the break pedal goes to the floor, we were told to change the master cylinder and did,, but it didnt fix the problem,...


After you change brakes you need to bleed air from the brake lines what you need to do is find the bleeder valve its usually rite beside where the brake line goes in the calipers and looks like a grease fitting get someone to pump the brake pedal 3 or 4 times and hold it while someone else loosens the bleeder valve to drain the air out keep the pedal mashed until you get the bleeder valve tightend back up . Do each wheel until fluid comes out check brake fluid while doing this so it doesnt run out. Hope this helps

Jun 03, 2011 | 2001 Pontiac Montana

1 Answer

Broken front coil spring on my 2000 Pontiac Montana


Sometimes they do break. Make sure you replace the springs as a pair.

Mar 12, 2011 | 2000 Pontiac Montana

2 Answers

What kind of transmission fluid goes in a 1999 pontiac montana


Recommended GM DEXRON® VI, Low viscosity transmission fluid.
Note: make sure you don't over fill transmission and the Montana's transmission are know for failures due to high fluid retention caused by high viscosity transmission fluid from additives or dirty transmission oil and filter.
Thank you for using Fixya and good luck.

Mar 20, 2010 | 1999 Pontiac Montana

1 Answer

Wher do I put transmission fluid in my 2000 pontiac montana


THIS IS A SEALED TRANSMISSION AND HAS NO DIPSTICK TUBE,THE DEALER HAS A SPECIAL TOOL FOR CHECKING FLUID LEVEL, THE PLUG FOR ADDING FLUID IS ON THE TOP OF THE HOUSING NEAR WHERE THE LEFT AXLE GOES OUT. DON'T JUIST BLINDLY ADD FLUID, IF U OVERFILL IT U CAN BURN UP THE TRANSMISSION.

Nov 06, 2009 | 2002 Pontiac Montana

2 Answers

2001 Pontiac Montana van, the rear window washer does not put out the cleaning fluid?


have someone push the washer button while someone else goes back to the rear and listens for a humming noise. if there is no noise then the little pump that shoots the fluid out is not working.
If there is a humming noise then the line is clogged.
hope this helps

Jul 01, 2009 | 2001 Pontiac Montana

Not finding what you are looking for?
2000 Pontiac Montana Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...