Question about 2002 Chrysler Voyager

2 Answers

Locate windshield washer motor

I have a chrysler town and country 1999 and suspect that the windshield washer motor has failed and would like to replace it but for the life of me I cannot locate it. Can anyone help?? I see the resouvor cramed between the the coolant resouvor and the fender but no sign of the motor???

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2000 town and country and just replaced my motor. It's easiest to do it you jack up the car on the front passenger side and remove the wheel. Then unscrew the plastic guard underneath the fender. You will have easy access to it then. Place a pan on the ground underneath the reservoir to catch any remaining fluid. Unclasp

Posted on Feb 18, 2011

  • danpugsley Feb 18, 2011

    Hit submit on accident. Unclasp the wiring and then gently pull and twist the motor out of the reservoir. Remove the seal as well. If the new motor came with a seal (it should have) throw away the old seal. Put new seal in reservoir opening, then gently glide new motor into opening until the ridge catches on the ring of the seal. Reattach tubing to motor and then wiring. Put some fluid in reservoir. While car is still up, start vehicle and test to see if it is working properly. Just tap on washer fluid button a few times to make sure any air is expelled. Once you see fluid, turn off car, reattach shield, put tire back on, lower car and remove jack.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

If you lie on the floor under the reservoir and look where the plastic is round under the wheel arch then you will see at the very bottom of reservoir is the offending motor. if you hear it start off but still no water then you mite just have a blockage. caution should be take when taking this off as it will squirt water all overt the place.

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel filter on a 1999 chrysler town and country


I belive the filter is in the fuel tank, its an integeral part of the pump/pickup assembly

Aug 08, 2012 | 1999 Chrysler Town & Country

1 Answer

Water coming out under the chrysler town and country and it dont look like its coming from radiator


Ok , Robin...
Note the color and smell of the 'water'.
is it green and smells sweet?
(antifreeze)
is it clear and has no smell ?
(condensation discharge from the ac evaporator)
is it blueish or pinkish colored?
(Windshield washer fluid)

Next note where the 'water' is comming from
(aprox. location of leak while vehicle is at rest)

turn the A/C off
make sure the windshield defrost is not on also...
let the van run a while in an area you know to be clean and clear of any previous leaks.

Tell us what you've found after doing this.

Thanks !

Oct 17, 2011 | 2001 Chrysler Town & Country

1 Answer

Front PCV Valve on chrysler town and country


1930013.gif
PCV valve location-2.4L engine

3a8cecf.gif
PCV valve location-3.3L and 3.8L engines

Nov 13, 2009 | 1999 Chrysler Town & Country

2 Answers

Washer doesn't work and I can't hear the pupmp motor working.


The windshield washer pump is part of the windshield wash reservior.
There is an electrical connector located on the bottom of the reservior.
That is the pump .
If the pump is not in the reservior. I would just trace the washer fluid lines from the sprayer on the vehicle back to the pump. The lines just might lead back to the reservior for the windshield wash solution. Then you will have confirmed the pump is in the reservior.

You may have to get a new reservior. The pump might not be seperate item, I am not 100% sure on that.

I also would double check the fuses and any relays related to the washer pump.

Finally, I would check the washer switch if you replace the pump and still is not working .

Good luck

Mar 31, 2009 | 2002 Chrysler Town & Country

1 Answer

Windshield washer motor


I believe there is a recall on the windshield washer motor. Call a dealer to see if you can get this fixed for free. Good luck!

Jan 18, 2009 | 2006 Chrysler Town & Country

Not finding what you are looking for?
2002 Chrysler Voyager Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...