Question about 1988 Ford Crown Victoria

3 Answers

How do i disable the horn on my 1988 crown victoria

It keeps beeping

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 19,396 Answers

Remove the horn relay.

To find the horn relay:
"look under the hood on the left, front side of the car there's a somewhat triangle shaped box with fuses in it. It has 1 latch @ the top(left side of the box) & 2 latches @ the bottom(right side of the box). Open & pull off top. Under top will be names of the fuses & relays you will need to take it out and take it with you to the parts store so they can match it up with one they have they may have to order it call first. "

from: WikiAnswers

Posted on Feb 24, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

I got the same problem, and this post just helped me!!!

Posted on Jun 27, 2009

  • Bill Jun 27, 2009

    Fuel Filter is located on the rear passenger side, infront of the wheel, just under the door.

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

1988 Ford crown vic fuel hand not working and fuse was good
where is the fuel filter

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2008 crown victoria formally police car , horn not working, how I get back to work


Usually, the horn is powered all the way to the horn switch, where the ground wire is connected to the ground. The thing to check is this, or to ground one side (preferably not the live side) of the horn to test this.

Jan 30, 2015 | 2008 Ford Crown Victoria

2 Answers

Horn does not work 97 crown victoria


FIRST I WOULD CHECK THE HORN FUSE OR RELAY ...CHECK YOUR OWNERS MANUEL TO SEE FOR LOCATION PROBABLY UNDER HOOD IN A RELAY STATION BOX.IF THOSE ARE GOOD..THEN POSSIBLE BAD HORN ITSELF OR BAD CONTACT BEHIND THE DRIVER AIRBAG,STEERING WHEEL.

Aug 06, 2011 | 1997 Ford Crown Victoria

2 Answers

My horn doesn't work for my 1988 Crown Victoria


check fuse and also check the wire going to the horn and check the inside of the horn too and check the ground

Jul 04, 2009 | 1988 Ford Crown Victoria

2 Answers

1988 Ford Crown Vic Horn Relay Location


The horn relay IS NOT located in a box toward the front of the engine. It is located just behind the radiator overflow reservoir and attached to the inner fender next to two other relays. It is the only one without a plastic cover over the top of it. FYI, our Crown Vic horn didn't blow, and the cruise didn't work. I changed the relay and still no horn. I decided to check the horns themselves. Found wires disconnected from terminals. Touched wire to horn terminal and horn blew incessantly. (previous owner had disconnected horn rather than diagnose why) Pulled the horn "button" from steering wheel and disconnected the wire leads and horn quit. Disassembled the "button" assembly. Foam had degraded over time between the contacts. (Ford has discontinued this part). Cleaned and replaced foam with Scotch foam mounting squares with holes punched out over contacts (2 layers thick). Re-assembled and viola! Horn and cruise control both work! Relay was bad as was horn button.

Jun 27, 2009 | 1988 Ford Crown Victoria

4 Answers

1988 Ford Crown Vic Lost Cruise Control


Although I don't think the cruise is an issue for safety, reach in under hood , or in grille area and find your horn(s) and just pull the connector off them temporarily, so they won't blow & put fuse back in and see if cruise starts to work again. It's not unusual for circuits to be labeled wrong or not at all in fuse panels. Then you can turn your attention to horn problem.

Jun 27, 2009 | 1988 Ford Crown Victoria

1 Answer

Horn beeping 4 no reson.


It sounds like the car has a old alarm system on it. Check around under the hood and under the dash see if you see anything it might be that this arming and disarming from a bad ground.

let me know

May 16, 2009 | 1993 Ford Crown Victoria

3 Answers

Fix this please


If your horn doesnt work either you have to remove the steering wheel and there is the connector for the horn/cruise control. If nothing broken there, check the clock spring too!

Apr 19, 2009 | 1988 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...