Question about 1993 Oldsmobile Cutlass Ciera

1 Answer

Rear turn signals not working

Both left/right rear turns signals not working. replaced the bulbs and there were no bad fuses. could the problem be electrical or within the steering column itself?

Posted by on

  • insane1_16 Feb 24, 2009

    yes. both flashers were replaced.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Did you replace the flasher?

Posted on Feb 24, 2009

  • Isaac F Dods Feb 24, 2009

    Do the brake lights work?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have sourced out all fuses and bulbs, yet continue to have a rapid right turn signal. I don't know where else to look. help?


replace the right rear bulb. the quick flashing indicates a bad bulb. it could be a wiring problem to the rear for the signal light that you will have to check out starting at the socket and working forward.

Mar 29, 2015 | 2005 Chevrolet Uplander

1 Answer

TURN SIGNALS


Hi

Did you check the fuses for the turn lights? Do the
parking lights work? If the parking lights work then you probably have a
problem either in the switch or in turn signal module thing.
The burned out bulb is what might be causing it not to blink... if one bulb is burned out you gotta replace it, make no difference if front or back,the left blinker will not work if the left front or rear bulb is bad.
same with the right side. if the front right or rear right turn signal
light is burned out it will not work.....get replacing the bulbs.Hope this solves your problem.Please rate me if my solution helped you.

Regards,
bonefirediv.
slide_cars_trucks.jpg

Apr 12, 2014 | 1988 Ford Taurus

1 Answer

Driverside back turning signal will not work, replaced all bulbs fuse tested ok, the passenger side these are both rear works


Your Questions is Confusing...

Your LEFT REAR is not working your RIGHT REAR is working? Either you have a Bulb that is Bad, Bulb Socket that is not working, or you have a GROUND Problem..

You need to also see if the TURN SIGNAL is working on the LEFT. If NOTHING is working then you know it is a Ground Issue. IF the BRAKE LIGHTS WORK and the Turn Signal does not, then it is the BULB.

Apr 08, 2013 | Cars & Trucks

1 Answer

Left rear brake,signal donot work,right rear side works,when i turn lever to make left turn,lite on dash board,blinks rapidly, replaced bulb and checked fuse


Most likely a bad multifunction switch (turn signal switch), try wiggling the turn signal lever while it is turned to the left and see ifit ever works.This is extremely common problem on fords,but not the only one, could also be a broken wire ,bad ground or a bad light socket.

Jan 30, 2011 | 2004 Ford F150

2 Answers

99 Chevy Tahoe... Rear turn signals, brake lights, and hazards


I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Oct 10, 2009 | 1999 Chevrolet Tahoe

1 Answer

Left rear turn signal and brake light dont work


You have a broken wire to the turn/brake light portion of the light as they use the same wire. Or where the plug goes into the light assy could be bad. Torsion mount lights are horrible and you should think about replacing with a universal light that you can wire direct.

Feb 17, 2009 | 1997 Jeep Wrangler

2 Answers

2001 Explorer Sport ,Rear Driver Brake Light and Turn Sig. Broke


Rear lights are double filament bulbs one side for the lights other side for the brake/turn signals so it still may be a bulb. Do u have a test light or volt meter you can check to make sure u have power there when brakes or turn signals are activated. Or just try another bulb.

Feb 12, 2009 | 2001 Ford Explorer Sport

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...